Download documents for NEWTON WATERPROOFING SYSTEMS

NEWTON WATERPROOFING SYSTEMS: 1. Newton Guide To Waterproofing
COMPLETE WATERPROOFING SOLUTIONS FOR NEW AND EXISTING STRUCTURES, Basement Waterproofing, Deck Waterproofing, Tunnel Waterproofing, Historic Building Waterproofing

Published [06/12/2019]File size [7850 KB]

NEWTON WATERPROOFING SYSTEMS: 1. Newton Waterproofing Systems Product Catalogue 2021 v2
Structural waterproofing. External waterproofing systems. Cavity Drained Waterproofing Systems. Cold Applied Liquid Membranes. Waterproof Coatings. Liquid Roofing Membranes. Ground Gas Protection Membranes. DampProofing. Hydrobond. HydroCoat. DeckDrain. GeoDrain. RivePipe. RiveOut. RiveStop. Newton CDM. Fibran. BaseDrain. Newtonite. DampSafe. NewCoat. Tunnelinject. Leakinject. Flexproof. Hexafix. Collomix. KG-FIX. DAB Genix.

Published [22/09/2022]File size [11185 KB]

NEWTON WATERPROOFING SYSTEMS: 2. The Newton Waterproofing Index
Waterproofing

Published [16/07/2018]File size [4286 KB]

NEWTON WATERPROOFING SYSTEMS: 3. Newton Membrane Recycling Service

Published [07/11/2017]File size [1378 KB]

NEWTON WATERPROOFING SYSTEMS: 5.Newton Waterproofing Product Directory Systems March 2016
Cavity Drainage Basement Tanking Basement Waterproofing Tanking Waterproofing membranes DPC radon protection

Published [27/10/2017]File size [4118 KB]

NEWTON WATERPROOFING SYSTEMS: 520 Eco Floor TDS LS 26.10.23
20mm Recycled Cavity Drain Basement Floor Membrane

Published [16/09/2024]File size [1158 KB]

NEWTON WATERPROOFING SYSTEMS: A 03 Newton Specification Sheet 315 301 403 109 8 3.0
External Waterproofing of Block walls & RC Raft

Published [17/09/2024]File size [493 KB]

NEWTON WATERPROOFING SYSTEMS: A 05 Newton Specification Sheet 403 301 315 3.0
External Waterproofing RC Box & Contiguous Piles

Published [25/06/2024]File size [676 KB]

NEWTON WATERPROOFING SYSTEMS: A 12 Newton Specification Sheet 315 403 107F 3.0
Internal Waterproofing of Underpinning

Published [25/06/2024]File size [507 KB]

NEWTON WATERPROOFING SYSTEMS: A 18 Newton Specification Sheet Hollow Block Work 108 9 809 1.0
External Waterproofing of Hollow Block Walls

Published [25/06/2024]File size [540 KB]

NEWTON WATERPROOFING SYSTEMS: AA 01 Newton Specification Sheet 108 9 315 107F 3.0
Combined Waterproofing of Block Walls

Published [17/09/2024]File size [521 KB]

NEWTON WATERPROOFING SYSTEMS: AA 05 Newton Specification Sheet 403 315 107F 2.0
Barrier Waterproofing of Contiguous Piles

Published [25/06/2024]File size [698 KB]

NEWTON WATERPROOFING SYSTEMS: AA 06 Newton Specification Sheet Rev 2.0
Barrier Waterproofing of Concrete Structure

Published [25/06/2024]File size [496 KB]

NEWTON WATERPROOFING SYSTEMS: AC 03 Newton Specification Sheet 403 108 9 315 CDM 3.0
Combined Waterproofing of Block walls & RC raft

Published [17/09/2024]File size [578 KB]

NEWTON WATERPROOFING SYSTEMS: AC 10 Newton Specification Sheet 403 315 CDM 3.0
Combined Waterproofing of Concrete Structure

Published [25/06/2024]File size [526 KB]

NEWTON WATERPROOFING SYSTEMS: AC 22 Newton Specification Sheet 315 107F band CDM 3.0
Internal Waterproofing of Underpinning

Published [25/06/2024]File size [508 KB]

NEWTON WATERPROOFING SYSTEMS: AC 34 Newton Specification Sheet 403 108 109 302 315 CDM 5.1
Combined Waterproofing of XPS Insulated Concrete Formwork

Published [25/06/2024]File size [673 KB]

NEWTON WATERPROOFING SYSTEMS: AC 42 Newton Specification Sheet Hollow Block Work 108 9 CDM 1.0
Combined Waterproofing of Hollow Block Walls

Published [25/06/2024]File size [632 KB]

NEWTON WATERPROOFING SYSTEMS: B 02 Newton Specification Sheet 315 3.0
Integral Waterproofing of Concrete Structure

Published [25/06/2024]File size [521 KB]

NEWTON WATERPROOFING SYSTEMS: B 05 Newton Specification Sheet 301 315 3.0
Integral Waterproofing of Contiguous Piles

Published [25/06/2024]File size [576 KB]

NEWTON WATERPROOFING SYSTEMS: B 08 Newton Solution HydroTank Rev 1.0
Type B Waterproofing Newton HydroTank System

Published [25/06/2024]File size [522 KB]

NEWTON WATERPROOFING SYSTEMS: B 09 Newton Solution HydroTank Plus 2
Newton HydroTank Plus System

Published [25/06/2024]File size [486 KB]

NEWTON WATERPROOFING SYSTEMS: BABA 01 Newton Specification Sheet 403 B 302 107F Rev 1.0
Barrier Waterproofing of RC Box in front of Secant Piles

Published [25/06/2024]File size [727 KB]

NEWTON WATERPROOFING SYSTEMS: BAC 08 Newton Specification Sheet 315 403 CDM 3.0
Complete Waterproofing RC Basement within Secant Piles

Published [25/06/2024]File size [589 KB]

NEWTON WATERPROOFING SYSTEMS: BBA Cert 22 CDM 508 Cavity Drain Membrane
8mm Cavity Drain Membrane For Basements

Published [25/06/2024]File size [2972 KB]

NEWTON WATERPROOFING SYSTEMS: BBA Cert 22 CDM 508 Mesh
This Agrément Certificate Product Sheet(1) relates to Newton CDM 508 Mesh, a translucent high-density polyethylene (HDPE) membrane incorporating a polypropylene mesh as a key for plaster, render or dry lining on plaster dabs for damp-proofing walls and ceilings in new construction or in existing buildings.

Published [25/06/2024]File size [3765 KB]

NEWTON WATERPROOFING SYSTEMS: BBC 01 Newton Specification Sheet 315 CDM 3.0
Combined Waterproofing of Secant Piles

Published [25/06/2024]File size [532 KB]

NEWTON WATERPROOFING SYSTEMS: BC 02 Newton Specification Sheet 301 CDM 3.0
Combined Waterproofing of Concrete Structure

Published [25/06/2024]File size [513 KB]

NEWTON WATERPROOFING SYSTEMS: BC 03 Newton Specification Sheet 315 CDM 3.0
Combined Waterproofing of Concrete Structure

Published [25/06/2024]File size [552 KB]

NEWTON WATERPROOFING SYSTEMS: BC 16 Newton Specification Sheet 302 CDM 2.0
Combined Waterproofing RC Basement within Contig Piles

Published [25/06/2024]File size [567 KB]

NEWTON WATERPROOFING SYSTEMS: C 01 Newton Specification Sheet 315 CDM 3.0
Internal Waterproofing of Block walls & RC slab

Published [17/09/2024]File size [532 KB]

NEWTON WATERPROOFING SYSTEMS: CDM 503 Mesh Membrane TDS 5.2
3mm Meshed Cavity Drain Membrane

Published [25/06/2024]File size [476 KB]

NEWTON WATERPROOFING SYSTEMS: CDM 508 8mm TDS 11.2
CDM 508 8mm Cavity Drain Membranes

Published [25/06/2024]File size [652 KB]

NEWTON WATERPROOFING SYSTEMS: CDM 508 eco Floor TDS v12 26.10.23
Newton 508 eco Floor 8mm Recycled Cavity Drain Floor Membrane

Published [10/09/2024]File size [818 KB]

NEWTON WATERPROOFING SYSTEMS: CDM 508 Mesh TDS 11.3 18.08.23
Newton CDM 508 Mesh 8mm Meshed Cavity Drain Membrane

Published [25/06/2024]File size [1531 KB]

NEWTON WATERPROOFING SYSTEMS: CDM 906 Lime Inhibitor TDS 2.2
CDM 906 Lime Inhibitor is applied to concrete surfaces prior to the installation of a Newton System 500 cavity drain membrane waterproofing system to prevent the ‘leaching’ of free lime from the concrete.

Published [27/09/2024]File size [202 KB]

NEWTON WATERPROOFING SYSTEMS: CDM Fibran XPS 500C Data Sheet V2.6 15.07.24
Newton Fibran XPS 500-C is a 50 mm deep, closed-cell thermal insulation board made from rigid extruded polystyrene foam (XPS). Insulation boards for cavity drain waterproofing systems.

Published [16/09/2024]File size [626 KB]

NEWTON WATERPROOFING SYSTEMS: DampSafe 601 Slimline TDS Flooring Membrane
DampSafe 601 Slimline High Grade Flooring Membrane

Published [10/09/2024]File size [219 KB]

NEWTON WATERPROOFING SYSTEMS: DampSafe 603 Tile D-Mat TDS 2.0 17.05.23
Decoupling Mat for Tiling

Published [10/09/2024]File size [814 KB]

NEWTON WATERPROOFING SYSTEMS: DampSafe 802 DPM TDS 1.2
Newton 802-DPM 100% recycled Damp proof membrane. Loose-laid, low density polyethylene dampproof membranes for use below concrete floors or screeds. DPMs. Newton802DPM

Published [27/09/2024]File size [407 KB]

NEWTON WATERPROOFING SYSTEMS: DampSafe 809-HP DPC TDS
DampSafe 809-HP DPC is a high performance polymeric, radon rated DPC. High Performance Physical DampProof Courses. DampSafe809HP

Published [25/06/2024]File size [533 KB]

NEWTON WATERPROOFING SYSTEMS: E A 01 Newton Solution 107F 3.0
Internal Waterproofing of Existing Structure

Published [25/06/2024]File size [523 KB]

NEWTON WATERPROOFING SYSTEMS: E AC 01 Newton Specification Sheet 403 302 107F CDM 3.0
Combined Waterproofing of Underpinning

Published [25/06/2024]File size [583 KB]

NEWTON WATERPROOFING SYSTEMS: E C 03 Newton Specification Sheet CDM 3.0
Internal Waterproofing of Existing Structure

Published [25/06/2024]File size [564 KB]

NEWTON WATERPROOFING SYSTEMS: E CA 04 Newton Specification Sheet 107F CDM 3.0
Internal Waterproofing of Existing Brick Wall

Published [25/06/2024]File size [533 KB]

NEWTON WATERPROOFING SYSTEMS: Epoxy DPM TDS 3.9 01.05.24
Damp Tolerable Epoxy DPM

Published [27/09/2024]File size [428 KB]

NEWTON WATERPROOFING SYSTEMS: Epoxy Primer TDS V3.4 19.10.24
Damp Tolerable Pre-Primer for Porous Surfaces

Published [27/09/2024]File size [586 KB]

NEWTON WATERPROOFING SYSTEMS: Epoxy Top Coat TDS 6.4
High Build Epoxy Top Coating, providing protective and decorative properties to concrete, steel and other substrates. Epoxy resin floor coatings. Newton701HB, NewtonNewCoatFlooringSystem.

Published [29/07/2024]File size [947 KB]

NEWTON WATERPROOFING SYSTEMS: FlexProof 106 TDS 2.4 22.05.23
FlexProof 106 is a highly advanced, single component, waterproofing compound for the waterproofing of joints that is supplied in two variants: FlexProof 106-X1 is a highly viscous, thixotropic paste that is suitable for the waterproofing of construction and vertical movement joints, whilst Newton FlexProof 106-NV has a lower viscosity and so is pourable and better suited where the application is to horizontal movement joints. Movement joint waterproofing compounds FlexProof106-X1, FlexProof106X1, FlexProof106-NV, FlexProof106NV

Published [27/09/2024]File size [1941 KB]

NEWTON WATERPROOFING SYSTEMS: FlexProof 305 ActiveJoint 20/26 TDS 2.5
FlexProof 305 ActiveJoint is an EDPM, movement joint profile which is used in conjunction with Newton 106 FlexProof to waterproof movement joints where risk of damage to the 106 FlexProof due to mechanical wear is expected. Movement Joint Profiles.

Published [10/09/2024]File size [289 KB]

NEWTON WATERPROOFING SYSTEMS: HydroBond 2K Flex TDS V2.7 December 2023
Newton HydroBond 2K-Flex is a radon gas certified, flexible, two-component, cold-applied, seamless bitumen/rubber waterproofing membrane used primarily for the external waterproofing of earth-retaining structures such as basements and foundation walls. WaterproofingMembranes NewtonHydroBond2KFlex, NewtonHydroBond2K-Flex

Published [30/09/2024]File size [577 KB]

NEWTON WATERPROOFING SYSTEMS: HydroBond 314 Bentonite Granules TDS 4.0
HydroBond 314 Bentonite Granules is a naturally occurring sodium bentonite in the form of varying sizes granules, used for detailing to the Newton HydroBond System, specifically where Newton 403 HydroBond terminates to otherwise difficult to detail building elements. Swelling detailing. Pipe sealing. HydroBond 314 Bentonite Granules

Published [24/01/2023]File size [334 KB]

NEWTON WATERPROOFING SYSTEMS: HydroBond 402 CCS-M TDS V4.9
Newton HydroBond 402 CCS-M is a high performance sheet membrane for the external waterproofing of below-groundfoundation structures, basements, water holding tanks, culverts and tunnel bases. Pliable and durable, the membrane negates the requirements for a smooth blinding and protection boards when used as a ground level radon DPM. TypeA External Pre-Applied Waterproofing Membranes. HydroBond402CSSM, HydroBond402CSS-M

Published [10/09/2024]File size [703 KB]

NEWTON WATERPROOFING SYSTEMS: HydroBond 403 Rev 7 GB
External Waterproofing Membrane & Gas Barrier

Published [16/09/2024]File size [761 KB]

NEWTON WATERPROOFING SYSTEMS: HydroBond 410 GeoDrain TDS 2.5
Newton HydroBond 410 GeoDrain is a two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water impermeable HDPE (High Density Polyethylene) drainage membrane. HydroBond 410 GeoDrain provides drainage and protection to the outside face of basement walls to sloping sites, preventing the build-up of water pressure and protecting the structure from aggressive water, chemicals and toxins, and provides mechanical protection only when used against the ‘Type A’ waterproofing where the site is not sloping and so where ground water removal is not viable or recommended. Externally Applied Drainage Membranes HydroBond410GeoDrain

Published [30/05/2023]File size [974 KB]

NEWTON WATERPROOFING SYSTEMS: HydroBond 914-RT Data Sheet Nov 2015
Non-Woven Reinforcement Tape For Newton 108 Hydrobond-LM & 109-LM

Published [27/09/2024]File size [725 KB]

NEWTON WATERPROOFING SYSTEMS: HydroBond SA Code 401M TDS 2.2
Type A Self-Adhesive Waterproofing Membranes

Published [11/05/2023]File size [474 KB]

NEWTON WATERPROOFING SYSTEMS: HydroBond SAGM TDS 1.1
HydroBond SAGM is a high performance, self-adhesive membrane for the external waterproofing and gas proofing of habitable below-ground structures. A composite of polythene and aluminium, coated on one side with a bitumen polymer adhesive, the membrane is post applied to concrete, after removal of form-work, or to built walls such as block or ICF. The membrane is flexible and durable and exhibits high resistance to impact, tear, puncture and settlement. TypeA Self-Adhesive Gas and Waterproofing Membranes NewtonHydroBondSAGM

Published [17/05/2023]File size [738 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 103 2K TDS V5.3
High Performance Liquid Waterproofing Membrane

Published [29/07/2024]File size [1283 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 104 Super TDS V3.8 22.03.23
HydroCoat 104 Super is applied to the surface of concrete to provide in-depth protection against moisture movement through the capillaries and hairline cracks in the concrete.

Published [27/09/2024]File size [581 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 105 1K TDS V2.6
Newton HydroCoat 105 1K is a single-component, polymer-modified, cement-based waterproofing slurry that incorporates advanced micro silica polymer and fibre technology. When cured, it creates a dense matrix with very high adhesion that is impermeable to water to 10 bar of water pressure to both the positive and negative pressure sides of the structure. Cementitious Waterproofing Slurries and Mortars HydroCoat1051K

Published [29/07/2024]File size [714 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 107 Elastic 2K TDS V5.4
HydroCoat 107 Elastic 2K is a two-component, cementitious, polymer-rich coating for the waterproofing and protection of concrete and masonry. Capable of withstanding heads of water pressure up to 10 bar of positive pressure and up to 1.5 bar to the negative side of the structure, HydroCoat 107 Elastic 2K is ideally suited to the waterproofing of reservoirs, tunnels, water tanks, earth-retaining structures and covered or buried decks, and is especially capable where the structure has both masonry and concrete elements where differential movement is expected. Cementitious Flexible Waterproofing Membranes HydroCoat107Elastic2K

Published [29/07/2024]File size [2429 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 203-RM Data Sheet V3.2
High Strength Repair Mortars.

Published [29/07/2024]File size [994 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 313 WP Data Sheet V6.1 10.01.2023
Newton HydroCoat 313-WP is a fast-setting polymer compound that instantly stops running water or seepage through masonry or concrete

Published [30/09/2024]File size [360 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 313-WP TDS 6.1
Fast Setting Polymer Compounds.

Published [23/01/2023]File size [360 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 903 Primer TDS 4.5 12.01.2023
Newton HydroCoat 903 Primer is a modified styrene/acrylic copolymer primer for concrete that is applied prior to the installation of Newton’s range of high performance cementitious waterproofing membranes, concrete repair and floor coating products, minimising the risk of out-gassing from both internal and external concrete substrate. Primers for waterproofing membranes NewtonHydroCoat903Primer

Published [27/09/2024]File size [1127 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 905-CM TDS V3.4 12.01.23
Newton HydroCoat 905-CM is a specially formulated, water-based curing compound utilising advanced acrylic copolymers, that ensures the correct curing of concrete and cement based mortars and coatings. Sprayed directly over the freshly placed concrete, mortar or coating, HydroCoat905-CM inhibits the effects of the drying sun and wind to ensure full cement hydration. The product should be used to correctly cure the HydroCoat103-2K and HydroCoat107Elastic2K cement/acrylic waterproofing membranes, and the HydroCoat203-RM high-strength repair mortar whenever there is a risk of accelerated drying. In fact, HydroCoat 905-CM should be considered a requirement when applying these products during the warmer months. Concrete and Mortar curing compounds. NewtonHydroCoat905CM, NewtonHydroCoat905-CM

Published [27/09/2024]File size [354 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat 912-RT TDS 3.2
Newton HydroCoat 912-RT is a spun-bond, polypropylene reinforcement tape used with Newton liquid applied membranes and coatings to reinforce changes in direction and over cracks and static construction and day joints. The tape can also be used with flexible membranes such as HydroCoat 107 Elastic 2K over covered joints where slight movement is expected. Non-Woven Reinforcement Tapes For Liquid Waterproofing Membranes NewtonHydroCoat912RT

Published [23/01/2023]File size [204 KB]

NEWTON WATERPROOFING SYSTEMS: HydroCoat LiquaBond TDS V6.4 22.08.23
Newton 908 LiquaBond is a formulated acrylic admixture used both as a primer for wet-to-dry cementitious systems and as an admixture which waterproofs cement-based mixes. Admixes. Admixtures. Newton908LiquaBond

Published [27/09/2024]File size [258 KB]

NEWTON WATERPROOFING SYSTEMS: HydroTank 301-EP Metal Waterbar TDS 1.5
Newton 301 EasyProof Metal Construction Joint Waterbars. Coated metal waterbar system used for the sealing of kickerless construction joints within retained concrete structures.

Published [10/09/2024]File size [340 KB]

NEWTON WATERPROOFING SYSTEMS: HydroTank 306 Swell Mastic TDS 4.5
Newton 306 LeakSeal Fast-curing, swelling, single-component, polymeric adhesive sealant. Swelling Adhesive Mastics.

Published [10/09/2024]File size [365 KB]

NEWTON WATERPROOFING SYSTEMS: HydroTank 315 Waterbar TDS Nov 22 1.8
Swelling Waterbar

Published [27/09/2024]File size [317 KB]

NEWTON WATERPROOFING SYSTEMS: JN 02 Newton Solution 315 302 403 108 9 CDM
Complete Waterproofing of RC Basement

Published [25/06/2024]File size [938 KB]

NEWTON WATERPROOFING SYSTEMS: JN 05 Newton Solution 403 315 302 CDM 2.0
Complete Waterproofing RC Basement within Contig Piles

Published [25/06/2024]File size [843 KB]

NEWTON WATERPROOFING SYSTEMS: NewSeal 408 DeckDrain TDS 3.1
Drainage Membrane for Decks and Flat Roofs

Published [10/09/2024]File size [309 KB]

NEWTON WATERPROOFING SYSTEMS: NewSeal 409 Root Barrier TDS V5.5
Newton 409 Root nBarrier, An impermeable High Density Polyethylene (HDPE) membrane, providing robust root-proof protection.

Published [03/06/2024]File size [240 KB]

NEWTON WATERPROOFING SYSTEMS: Newton 508R Cavity Drain Membrane TDS 24.11.23
8mm Cavity Drain Membrane & Gas Barrier

Published [10/09/2024]File size [562 KB]

NEWTON WATERPROOFING SYSTEMS: Newton Basedrain Data Sheet V5.6 13.04.23
The drainage system used most commonly within the Newton CDM, ‘Type C’, cavity drain waterproofing system. Comprising a range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Sump System or safe drainage. Newton Floordrain drainage conduits.

Published [10/09/2024]File size [418 KB]

NEWTON WATERPROOFING SYSTEMS: Newton BBA Cert 22 6357 CDM 503 Mesh
This Agrément Certificate Product Sheet (1) relates to Newton CDM 503 Mesh, a translucent high-density polyethylene (HDPE) membrane incorporating a polypropylene mesh as a key for plaster, render or dry lining on plaster dabs for damp-proofing walls and ceilings in new construction or in existing buildings

Published [10/09/2024]File size [2907 KB]

NEWTON WATERPROOFING SYSTEMS: Newton BBA Cert 22 6357 CDM 520
Waterproofing Membranes

Published [29/07/2024]File size [3071 KB]

NEWTON WATERPROOFING SYSTEMS: Newton BBA Cert 94 3010 508 Eco Floor 2024
This Agrément Certificate Product Sheet (1) relates to Newton 508 Eco Floor, a moulded, recycled HDPE membrane for use as waterproofing and damp-proofing on floors, over a contaminated or damp background, to support a flooring

Published [10/09/2024]File size [3391 KB]

NEWTON WATERPROOFING SYSTEMS: Newton BBA Cert 94 3010 508-508R
8mm Cavity Drain Membrane & Gas Barrier

Published [29/07/2024]File size [3098 KB]

NEWTON WATERPROOFING SYSTEMS: Newton BS 8102 2022 Technical Paper Apr 22
TECHNICAL PAPER BRITISH STANDARD 8102:2022 An Overview of the New British Standard for Waterproofing BS8102:2022. BS81022022.

Published [10/09/2024]File size [827 KB]

NEWTON WATERPROOFING SYSTEMS: Newton CDM 503 TDS 3.0
3mm Cavity Drain Membrane

Published [30/09/2024]File size [365 KB]

NEWTON WATERPROOFING SYSTEMS: Newton CDM System Ancillaries Data Sheet 03.08.23
Ancillaries

Published [31/08/2023]File size [1760 KB]

NEWTON WATERPROOFING SYSTEMS: Newton CDM System Installation Manual 10.1
Newton CDM is a Type C waterproofing system that includes BBA Certified membranes, drainage channels, pumping systems and pumping ancillaries specifically designed for waterproofing earth retaining structures against water from the ground. Cavity Drain Waterproofing Systems. Cavity Drainage Membranes. Basement and Cellar waterproofing.

Published [10/09/2024]File size [806 KB]

NEWTON WATERPROOFING SYSTEMS: Newton CP Pumps Tech Data Sheet 3.2
Water Pumps.

Published [14/12/2022]File size [573 KB]

NEWTON WATERPROOFING SYSTEMS: Newton Dampsafe 603 Data Sheet
Newton 603 High Grade Floor Membrane

Published [29/07/2024]File size [372 KB]

NEWTON WATERPROOFING SYSTEMS: Newton HydroBond 109 LM TDS V6.4
Newton HydroBond 109-LM is a radon gas certified, flexible, single-component, cold-applied, seamless rubber waterproofing membrane used primarily for the external waterproofing of earth-retaining structures such as basements and foundation walls. Seamless Rubber Waterproofing Membranes.

Published [29/07/2024]File size [635 KB]

NEWTON WATERPROOFING SYSTEMS: Newton HydroBond 2K Flex Primer TDS 1.0 August 2022
Primers for damp substrates.

Published [12/12/2022]File size [340 KB]

NEWTON WATERPROOFING SYSTEMS: Newton HydroBond Installation Guide 5.1
Newton HydroBond Externally Applied Waterproofing System.

Published [03/06/2024]File size [2684 KB]

NEWTON WATERPROOFING SYSTEMS: Newton Hydrobond Lite 3
Pre-applied, Fully Bonded, Type A, Waterproofing Membrane

Published [30/09/2024]File size [280 KB]

NEWTON WATERPROOFING SYSTEMS: Newton HydroBond SA Primer LT TDS
Primer for HydroBond SA & HydroBond SAGM

Published [29/07/2024]File size [346 KB]

NEWTON WATERPROOFING SYSTEMS: Newton HydroCoat Tanking Slurry BBA Certificate
HydroCoat Tanking Slurry, a cementitious waterproofing compound for use as internal waterproofing against penetrating damp for walls of brickwork, blockwork, concrete, concrete blockwork or stone below the level of the installed damp-proof course (DPC).

Published [29/07/2024]File size [415 KB]

NEWTON WATERPROOFING SYSTEMS: Newton HydroCoat Tanking Slurry TDS 1.7
HydroCoat Tanking Slurry Cementitious waterproof coating

Published [29/07/2024]File size [747 KB]

NEWTON WATERPROOFING SYSTEMS: Newton Newtonite TDS Rev9 3.07.23
Non-Meshed Damp Proofing Membrane

Published [25/06/2024]File size [491 KB]

NEWTON WATERPROOFING SYSTEMS: Newton NP400PP Puddle Pump Data Sheet 1.1 1
The Newton NP400PP 400 watt puddle pumps designed for pumping water down to very low levels.

Published [25/06/2024]File size [789 KB]

NEWTON WATERPROOFING SYSTEMS: Newton PAC 500 System Overview 2.3
Positive Air Curtain, Waterproofing & Ground Gas Mitigation

Published [25/06/2024]File size [2018 KB]

NEWTON WATERPROOFING SYSTEMS: Newton PC 509 Rubber Acryl
324 high-performance, five-part resin that after injection by conventional packers, reacts to form a very durable and flexible acrylic-rubber that exhibits exceptional adhesion, ensuring the comprehensive sealing of water leaks in structures that are subject to settlement or movement. Crack Injection Waterbars, Waterstops, Waterplugs

Published [16/10/2020]File size [721 KB]

NEWTON WATERPROOFING SYSTEMS: Newton Technical Paper Basement Drainage Solutions
Basement Drainage Solutions

Published [28/02/2022]File size [9442 KB]

NEWTON WATERPROOFING SYSTEMS: Newton Technical Paper Long Term Compressive Loads
Compressive Load Capabilities of Type C Waterproofing. Cavity Drain Membranes. Newton508R, Newton508ecoFloor, Newton520eco, Newton408DeckDrain, TypeCWaterproofing.

Published [28/02/2022]File size [2251 KB]

NEWTON WATERPROOFING SYSTEMS: Newton Technical Paper Maintaining Type C Systems
Type C waterproofing system maintenance. The Newton CDM System is a Type C waterproofing solution that comprises of BBA-certified cavity drain membranes, drainage channels, pumping systems and pumping ancillaries that are all specifically designed for waterproofing and protecting earth-retaining and below- ground structures against water from the ground. NewtonCDMSystem, TypeCWaterproofing,

Published [10/09/2024]File size [932 KB]

NEWTON WATERPROOFING SYSTEMS: Newton Tradecc Injection Resin Comparison Chart Apr 23
To assist with comparing the different features of our Tradecc injection resins

Published [10/09/2024]File size [146 KB]

NEWTON WATERPROOFING SYSTEMS: Newton Waterproofing Design Services 2.0
Design Service Integrates with Your Plan of Work

Published [10/09/2024]File size [2831 KB]

NEWTON WATERPROOFING SYSTEMS: Newtonite 801 Mastic Sealant Data Sheet 1.1
Newtonite 801 Mastic Sealant is a non-toxic, solvent-free, multipurpose and single component silicone sealant

Published [24/01/2023]File size [286 KB]

NEWTON WATERPROOFING SYSTEMS: Newtonite Lath Mesh Membrane 9.1 05.06.23
Meshed Damp Proofing Membrane

Published [27/09/2024]File size [1365 KB]

NEWTON WATERPROOFING SYSTEMS: w. CDM 503 3mm DoP
3mm Cavity Drain Membrane for Basements

Published [13/12/2022]File size [239 KB]

NEWTON WATERPROOFING SYSTEMS: w. CDM 503 DoC 1.0 9 November 2022 JH
Newton CDM 503 is a BBA certified, high quality, 3mm cavity drain waterproofing membrane, for use within the Newton CDM System, our internally applied waterproofing system that also includes drainage and pumping systems.

Published [30/09/2024]File size [241 KB]

NEWTON WATERPROOFING SYSTEMS: w. CDM 503 DoP 3.0 24 August 2022 JH
3mm Cavity Drain Membrane

Published [10/09/2024]File size [239 KB]

NEWTON WATERPROOFING SYSTEMS: w. CDM 503 Mesh Membrane DoC
Newton CDM 503 Mesh is a high quality, BBA certified, 3mm meshed cavity drain waterproofing membrane for use within the Newton CDM System. MeshedCavityDrainageWaterprooringMembranes NewtonCDM503Mesh

Published [13/12/2022]File size [242 KB]