These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

1. GEC Anderson Combined Brochure
stainless steel sinks, worktops, sanitaryware, shelving

Published [14/05/2024]File size [2993 KB]

2 - Made to Measure Stainless Steel Products
Stainless Steel Worktops, Stainless Steel surfaces, Stainless Steel counters, Stainless Steel Kitchens, Stainless Steel vanity tops, Stainless Steel Sanitaryware

Published [03/09/2021]File size [1011 KB]

3 - Series A Sinks
Stainless Steel Sink Bowls, Stainless Steel Sinks

Published [03/09/2021]File size [156 KB]

4 - Decimetric brochure
stainless Steel Worktops, Stainless Steel surfaces, Stainless Steel counters, Stainless Steel Kitchens, Stainless Steel vanity tops, Stainless Steel Sanitaryware

Published [03/09/2021]File size [678 KB]

5 - Sanitaryware brochure
Stainless Steel Worktops, Stainless Steel surfaces, Stainless Steel counters, Stainless Steel Kitchens, Stainless Steel vanity tops, Stainless Steel Sanitaryware

Published [03/09/2021]File size [1035 KB]

Basket Strainer
Basket Strainer Waste for kitchen sinks. Removeable strainer cup. Push down to seal. Lift to act as strainer. Sink Wastes.

Published [22/09/2022]File size [30 KB]

Bowls 4 Dm Bowls
4 Dm (400 mm) Sink Bowls

Published [15/06/2021]File size [43 KB]

Bowls 5 Dm Bowls
5 Dm (500 mm) Sink Bowls

Published [15/06/2021]File size [48 KB]

Cleaners Sink UG40
Cleaners Sink UG40

Published [25/07/2023]File size [278 KB]

Combination Sink A5023T
The A5023T is one of the GEC Anderson® Series A range of combination stainless steel sinks, including tap landing. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes.

Published [24/08/2023]File size [425 KB]

Combination Stainless Steel Sink A1831T
Combination Sink A1831T

Published [25/07/2023]File size [425 KB]

DR267 DG65 D Double Drainer Commercial Steel Sinktop
double bowl, double drainer - commercial grade stainless steel sinktop.

Published [25/07/2023]File size [252 KB]

Flat Brushed Satin Stainless Steel Splashbacks
Splashbacks from GEC Anderson® are made to measure using brushed satin stainless steel

Published [25/07/2023]File size [213 KB]

Frames
GEC ANDERSON® UNDER-FRAMES For free-standing surfaces and units with or without stainless base cabinets and drawer cabinets. Hygienic, versatile and durable. Suitable for high load capacities.

Published [22/09/2022]File size [47 KB]

GEC Anderson Data Sheet Base Cabinet V84/V84D
Stainless Steel Base Cabinets (V84 / V84D)

Published [06/06/2024]File size [652 KB]

GEC Anderson Data Sheet Combination Sink A1831
Combination Sink A1831

Published [06/06/2024]File size [422 KB]

GEC Anderson Data Sheet Drawer Cabinet V740
Stainelss Steel Drawer Cabinets

Published [06/06/2024]File size [325 KB]

GEC Anderson Data Sheet Individual Stainless Steel Sinks A18
individual stainless steel sinks

Published [06/06/2024]File size [411 KB]

GEC Anderson Data Sheet Stainless Steel Mirror
stainless steel mirrors offer a clear and accurate reflection, thus providing a safe and durable alternative to glass.

Published [06/06/2024]File size [378 KB]

GEC Anderson Data Sheet Stainless Steel Wall Cabinet V81
Stainless steel Wall Cabinet

Published [06/06/2024]File size [566 KB]

GEC Anderson Data Sheet Standard Individual Stainless Steel Sink LE50
standard range of individual stainless steel sinks

Published [06/06/2024]File size [140 KB]

GEC Anderson Data Sheet Stepless Stainless Steel Shelving V90

Published [06/06/2024]File size [1171 KB]

GEC Anderson DataSheet Boss Draining Work Surface
GEC Anderson® BOSS profile provides an attractive and practical alternative work surface finish. The BOSS raised profile facilitates drainage and can also be used for hot pans

Published [06/06/2024]File size [749 KB]

GEC Anderson Wash Basin V214 Data Sheet
wall hung stainless steel wash basin

Published [14/05/2024]File size [160 KB]

GEC Anderson Wash Basin V216 Data Sheet
V216 wall hung stainless steel wash basin: 400 x 390mm. Complete with Ø32mm waste and overflow and captive plug. Fully shrouded No tapholes.

Published [14/05/2024]File size [485 KB]

GEC Anderson Wash Basin V216 HCP Data Sheet
V216 HCP wall hung stainless steel wash basin: 400 x 390x130mm. Complete with Ø32mm waste and captive plug. Fully shrouded.

Published [14/05/2024]File size [629 KB]

GEC Anderson Wash Basin WB45 Data Sheet
wall hung stainless steel wash basin

Published [14/05/2024]File size [372 KB]

Gypsum Separator V55 Stainless Steel Sink
V55 Stainless steel (EN 1.4401 grade) gypsum separator With Ø38mm threaded inlet and outlet fittings, removable quick release container with drain valve and handle. Cantilever brackets for wall fixing

Published [25/07/2023]File size [626 KB]

Inline Drainer Sink
A sloped area is pressed into the worktop, adjacent to sink to provide a sleek and efficient drainer

Published [25/07/2023]File size [236 KB]

Irregular Forms and Curves Worktops
Irregular forms, such as curves, splays and angles make it possible to design worktops that fit exactly into the space available. Purpose Made Stainless Steel worktops. Made to Measure kitchen worktops. Curved Worktops.

Published [22/09/2022]File size [46 KB]

L-Shapes Stainless Steel Worktops
L Shaped Stainless steel kitchen worktops available in one piece to give a clean and uncluttered appearance with no joins, crevices or dirt traps. LShaped LShapes. No dirt traps

Published [22/09/2022]File size [43 KB]

Multistation Wash Basin

Published [15/06/2021]File size [39 KB]

Pressed Recess Stainless Steel
A flat, recessed, area is pressed into the worktop to provide a wet zone or catchment area. Sink bowl(s) sit within the pressed recess

Published [25/07/2023]File size [274 KB]

Sand Trap V220
Stainless steel sand trap with Ø 38 mm threaded top-inlet and reversible Ø 38 mm threaded side outlet. Quick-release sediment container. EN 1.4301 stainless steel. Kitchen waste sand traps.

Published [22/09/2022]File size [27 KB]

Separator Stainless Steel V55
V55 Stainless steel (EN 1.4401 grade) gypsum separatorWith Ø38mm threaded inlet and outlet fittings, removable quick release container with drain valve and handle. Cantilever brackets for wall fixing

Published [24/08/2023]File size [626 KB]

Shrouded Stainless Steel Drinking Fountain DF216
Shrouded Stainless Steel Drinking Fountain

Published [15/06/2021]File size [30 KB]

Sink A1834
stainless Steel combination sink

Published [26/07/2021]File size [31 KB]

Sink A74 Stainless Steel
The A74 is one of the GEC Anderson® Series A range of individual stainless steel sinks. Series A sinks are of the highest quality and finish and are available in single, double and combination sizes

Published [18/08/2023]File size [414 KB]

Sinks Circular LR25
The LR25 is one of the GEC Anderson® standard range of circular individual stainless steel sinks

Published [24/08/2023]File size [141 KB]

Sinks Circular LR31
The LR31 is one of the GEC Anderson® standard range of circular individual stainless steel sinks

Published [24/08/2023]File size [133 KB]

Sinks Circular LR37
The LR37 is one of the GEC Anderson® standard range of circular individual stainless steel sinks

Published [24/08/2023]File size [138 KB]

Sinks Circular LR38
The LR38 is one of the GEC Anderson® standard range of circular individual stainless steel sinks

Published [24/08/2023]File size [138 KB]

Sinks Circular V211
The V211 is one of the GEC Anderson® standard range of circular individual stainless steel sinks.

Published [24/08/2023]File size [135 KB]

Sinks Combination M10L
M10 stainless steel inset sink and drainer with integrated drainer recess (sink bowl: 520 x 420 x 200mm; drainer recess: 300 x 440mm). Complete with fixing clamps and basket strainer waste. Overall size 998x500mm.(Left hand bowl)

Published [24/08/2023]File size [141 KB]

Stainless Steel Doors & Drawer Fronts
STAINLESS STEEL DOORS AND DRAWER FRONTS

Published [15/06/2021]File size [36 KB]

Stainless Steel Wall-Hung Drinking Fountain DF214
Stainless Steel Wall-Hung Drinking Fountain

Published [15/06/2021]File size [26 KB]

Stainless Steel Worktop Rectangle
RECTANGULAR STAINLESS STEEL WORKTOPS

Published [18/08/2023]File size [87 KB]

Steel Splashbacks & Panels
STEEL SPLASHBACKS AND PANELS

Published [25/07/2023]File size [215 KB]

StorTidy V108
StorTidy V108 stainless steel StorTidy set comprising: 3 No upper shelves (200mm wide) and 1 No intermediate towel rail.450mm long with 1 No low shelf (315mm wide).

Published [18/08/2023]File size [1539 KB]

Straight Stainless Steel Worktops
GEC Anderson specialise in single-piece and over-sized stainless steel worktops. Lengths of up to 7000mm are available. Corners can be at any angle Up to 650mm width is considered standard but larger sizes are available eg.1200mm Stainless steel kitchen worktops

Published [22/09/2022]File size [39 KB]

Surface Bowls
surface bowls

Published [15/06/2021]File size [30 KB]

V345 Bowl Urinal Stainless Steel
V345 wall mounted stainless steel bowl urinal. Complete with spreader, grated outlet and plastic water trap for wall outlet. Ø15mm threaded inlet fitting.

Published [25/07/2023]File size [1249 KB]

w. GEC Anderson Contribute to Bridge Professional Development Centre case study

Published [12/06/2024]File size [513 KB]

w. GEC Anderson Stainless Steel Elevate London Lobby Spaces case study

Published [12/06/2024]File size [343 KB]

Wall Mounted Stainless Steel Wash Trough V240
WALL-MOUNTED STAINLESS STEEL WASH TROUGH

Published [26/07/2021]File size [39 KB]

Wall Mounted Stainless Steel Wash Trough V246
WALL-MOUNTED STAINLESS STEEL WASH TROUGH

Published [28/07/2022]File size [30 KB]

Wash Basin WB45 Wall Hung Stainless Steel
WB45 wall hung stainless steel wash basin 450x400mm with 60mm rear upstand and 200mm shroud. Ø38mm grated waste

Published [25/07/2023]File size [372 KB]

WC V130 S Stainless Steel
V130 Low flushing stainless steel WC and cistern with 6 litre stainless steel cistern, diaphragm flushing mechanism and push-button control. S-trap. Drilled for seat and lid

Published [25/07/2023]File size [400 KB]

WC V131 HCP Stainless Steel Wall Mounted
Stainless steel cantilevered wall mounted WC pan c/w fixing plate and P-trap

Published [25/07/2023]File size [861 KB]

WC V131 Stainless Steel Cantilevered Pan
Stainless steel cantilevered WC pan c/w fixing plate and P-trap.Drilled for seat and lid

Published [25/07/2023]File size [1000 KB]

Worktop Joins
We always aim to minimise the numbers of joins required within worksurfaces. However, sometimes joins are simply unavoidable (eg. due to access restrictions). The simple butt-joint is often the best solution but alternatives such as the GEC Anderson® clamp joint can sometimes be more appropriate where a mechanical connection is required. Stainless Steel Kitchen worktops.

Published [22/09/2022]File size [44 KB]

Worktop L Shaped Left Stainless Steel
L-SHAPED STAINLESS STEEL WORKTOPS

Published [25/07/2023]File size [85 KB]

Worktop L Shaped Right Stainless Steel
L-SHAPED STAINLESS STEEL WORKTOPS

Published [25/07/2023]File size [86 KB]