The Largest Building Products Directory in the UK
HEATHPARK HOUSEDEVONSHIRE ROADHEATHPARK INDUSTRIAL ESTATEHONITONDEVON EX14 1SD Tel: 01392 363605 Fax:
Patented AL HEX® foil technology improves heat output and maximises the transfer of heat from the pipe into the floor, giving our products superior heating performance. This video shows how AL HEX® works and why we decided to adopt this into all our foiled products. OMNIE products are currently the only underfloor heating emitters in the UK that feature this technology.
Here at OMNIE, we have launched two new insulated variants of our popular, low-profile overlay panel, LowBoard 2, which is designed to be laid over an existing floor with the lowest possible build-up. The latest additions to our range are: • LowBoard 2 Insulate • LowBoard 2 Insulate Plus The lower panels of the variants are made from insulating expanded polystyrene which gives 2 key advantages: • EPS lower panel means that a retrofit system can offer defence against downward heat loss. • Once laid during first fix, LowBoard 2 Insulate can safely be walked on by other trades before being covered by the final floor finish
Insulated panels that sit between battens. Got a project in mind? Call 01392 363605 or visit omnie.co.uk
FoilBatten from OMNIE is an underfloor heating panel for timber batten floors. Manufactured by OMNIE, the panel is made from insulation with a soft temper aluminium heat diffuser pre- bonded to the surface making it easier to trim than rigid plates as well as removing the clicking and creaking that comes from plates when they warm-up. As the panels fit neatly in the batten space, unlike aluminium diffusers, the top of the batten is free from fixings. The panels ensure good contact with the floor removing the possibility of sagging plates and poor heat output.
FoilBoard® from OMNIE is an underfloor heating panel for timber suspended floors. Manufactured by OMNIE, the panel is made from insulation with a soft temper aluminium heat diffuser pre-bonded to the surface making it easier to trim than rigid plates as well as removing the clicking and creaking that comes from plates when they warm-up. ‘L’ shaped brackets can be supplied which leave the top of the joist free for fixings as well as ensuring the panel is in direct contact with the floor improving the heat output, often a problem with thick aluminium diffuser plates.
Insulation panel that floats over an existing timber or concrete floor. Got a project in mind? Call 01392 36 36 05 or visit omnie.co.uk
FoilFloat from OMNIE is an underfloor heating panel for fully floating floors. Manufactured by OMNIE, the panel is made from extruded polystyrene (XPS) which has a high compressive strength making it perfect to support the tongue and groove floor deck that is laid over. The FoilFloat panel has soft temper aluminium heat diffusers pre-bonded to the panel making it easier to trim than rigid diffusers as well as removing the clicking and creaking that comes from rigid plates when they warm-up and cool down.
Cementitious board panel for use with tiled floor finishes. Got a project in mind? Call 01392 36 36 05 or visit www.omnie.co.uk
OMNIE-Tile is a low build-up UFH product manufactured by OMNIE. Using 20mm extruded polystyrene insulation (XPS) faced with cementitious material, the tiles can be laid with confidence on a firm tried and fully tested floor build-up. The OMNIE-Tile panels are routed with 12mm channels with loops at either end of the board to make installation easy to manage with the minimal amount of cutting. The panels are simply fixed or bonded to the subfloor and, in turn, tiles are adhered to the board. As the tiles and adhesive are conductive the heat output and warm-up are sufficient without needing an aluminium diffuser, however, high water temperatures should be avoided as this will lead to noticeable cold spots on the tiled floor where there is no pipe. The product cannot be used with any other floor finish.
Castellated plate system for use in screeded or concrete floors. Got a project in mind? Call 01392 36 36 05 or visit www.omnie.co.uk
The OMNIE ScreedPlate system has been purposely designed to avoid using fixings and staples in the floor, so can be laid over any subfloor, including acoustic insulation. ScreedPlates have castellations in the panel which grip the pipe. These are at set centres to provide a consistent guide for the spacing of the pipe as well as providing protection from site traffic. The panel is designed to allow the pipe to easily change direction and also provide a simple method of installation where the pipe approaches the manifold.
Easy to use pre-primed low build-up insulated panel designed for tiled floor finishes. Got a project in mind? Call 01392 36 36 05 or visit omnie.co.uk
Ultimate 2 is the new low build-up screed system from OMNIE that, due to the insulation and unique diffusers, has a higher heat output and faster warm-up than typical low build-up castellated screed systems, as well as minimising thermal striping. The high compressive strength insulation provides an excellent substrate for the 9mm thin levelling screed, giving an overall system height of just 27mm – including insulation. The 18mm panel uniquely comes pre-primed for the RS-Flex levelling screed and has a peel-off self-adhesive layer on the underside so it can be bonded directly with the subfloor. Just stick the panel down and pour the levelling screed over making it up to 50% faster to install than alternative thin screed systems, and reducing the system cost up to 35%.
OMNIE is a pioneer in the design and development of underfloor heating systems where low water temperatures, high performance and ease of installation are paramount. Decades of research and development has led to our most advanced and most efficient range of underfloor heating – designed to work in absolute harmony with our complementing technologies – heat pumps, ventilation and heat recovery and water distribution. This ensures that the complementary technologies we bring together work effectively to achieve lower costs, both environmental and financial, whilst giving the user the comfort they want.
OMNIE products work together to improve your health and well-being, creating a comfortable and healthy living space, whilst also helping the environment and reducing the running costs of your home. The complimentary heating and ventilation technologies integrate into a single whole house system with controls that manage all the technologies together in a simple intuitive way.
14% thinner than our previous product, LowBoard 2® offers a build-up height of just 18mm for a fully encased underfloor heating system to lay over an existing insulated floor. The system is designed to deliver superior heating performance while keeping installation risk and construction height to a minimum. LowBoard 2® features two distinctive routed panels that perfectly align around the warm water pipe, providing a surface ready for the floor finish to be laid over.
TorFloor 2® is an integrated floor deck and underfloor heating system that shows exactly where the pipes are, reducing installation risk and delivering the best possible heating performance. TorFloor 2® evolves the market-leading TorFloor® UFH panel by adding a 6mm TorFloor 2® chipboard upper panel with pre-foiled aluminium heat diffuser. Both panels are routed with matching channels that perfectly align around the pipework.
Combined finished floor deck and underfloor heating system for low build up applications. Got a project in mind? Call 01392 363605 or visit omnie.co.uk
Combined floor deck and underfloor heating system for suspended floors. Got a project in mind? Call 01392 36 36 05 or visit omnie.co.uk
Installation guide for the OMNIE PrecisionFlo Underfloor Heating Manifold and mixing unit, included with our systems from 2023 onwards. This manifold has lockshield valves on each of the flow meters.
In this short video, we show how our new TorFloor 2 Underfloor Heating System is much easier, quicker and safer to install than our competitors systems. Moreover, TorFloor 2 will significantly outperform the competitor system in terms of heat output and fast warm up times.