The Largest Building Products Directory in the UK
268 Bath RoadSloughBerkshire SL1 4DX Tel: 01207 566867 Fax: info@iso-chemie.co.uk
Installation of ISO BLOCO -One onto pvc frame. ISO-BLOCO ONE The ingenious 3-in-1 solution for 100 % joint airtightness Where three products used to be required, one is now enough: ISO-BLOCO ONE. The multi-functional joint sealing tape with outstanding three-level functionality is 100 % air tight and vapour-resistant on the inside, provides thermal and sound insulation in the centre and more than 1,000 Pa resistance to driving rain on the outside.
How to install Iso Chemie BLOCO ONE window sealing tapes on PVCu window frames.
Amazing fast, straight forward and covers all the requirements of UK Building Regulations ISO-BLOCO ONE is the bees knees when it comes to installing new or replacement windows and doors. This video shows a typical installation into a GB double wall construction with cavity closer. "A flash of the blindingly obvious" – there is no simpler and quicker way to install windows and doors and comply with all the requirements of airtightness, thermal and acoustic insulation and weather tight to hurricane force.
In our training clip, you can see the complete installation procedure for the ISO-TOP WINFRAMER "TYPE 3"IN FRONT OF WALL INSTALLATION SYSTEM. We give you tips and explain to you step by step what should be observed to create an optimal basis for the window installation in the insulation level.
ISO-CONNECT VARIO SD has extraordinary properties, because the new type of window connection film adapts to the seasonal temperature and vapour diffusion gradient from the inside to the outside or from the outside to the inside. As a result, ISO-CONNECT VARIO SD belongs to a completely new generation of films that ensure dry joints all year round. Mould in the connection joint no longer has a chance and the joint is sealed in an energy-saving way. Six finishes that offer maximum flexibility to cater for your specific application requirements.
Andrew Swift, National Sales Manager of ISO-Chemie, talks about the FITShow 2019.
The video documentation shows how a time-saving, convenient and energy-efficient installation and sealing of windows in the external thermal insulation composite system could be realised in the passive house project "new WALLDORF LOFTS" with the IN FRONT OF WALL INSTALLATION SYSTEM ISO-TOP WINFRAMER "TYPE 1" and the multifunctional sealing tape ISO-BLOCO ONE. For energy reasons, the installation position of the window elements was moved forward to the outside, into the area of the thermal insulation. The ISO-TOP WINFRAMER "TYPE 1" in front of wall installation system, which has been comprehensively tested and approved by ift Rosenheim, was therefore used for the thermal insulation-optimised window installation of the premium condominiums. See the advantages of ISO-TOP WINFRAMER "TYPE 1": https://www.iso-chemie.eu/en/sealing
The ISO-CONNECT EPDM SEALING COLLAR is a sealing system for windows in the facade that are exposed to the harshest weather conditions. This collar is made using our EPDM OUTSIDE FOIL. Special features include the corner connections which are vulcanised at the factory creating an extremely tear-resistant and permanently tight seal for these corners. for more product information: https://www.iso-chemie.eu/en/sealing
In our training clip, we show you how you can seal connection joints of windows and doors safely, easily and in a time-saving way with ISO-BLOCO MULTIFUNCTIONAL TAPE. In the video, we explain to you what a multifunctional tape actually is, where you can use it and how the RAL-compliant 3-level sealing really works.
ISO-BLOCO XTHERM is a omni-functional sealing tape with microtherm technology. It was specially developed for thermal insulation that is indirectly exposed to weathering. It is especially suitable for fitting components with larger frame installation depths and commonly available front doors and lift-and-slide doors. It offers excellent thermal insulation properties (Microtherm effect) over the entire installation depth. As it adapts very well to the installation joint, ISO-BLOCO XTHERM also provides excellent sound-proofing.
On our virtual exhibition stand we are demonstrating our new environment and climate-friendly product line – ISO-CONNECT “BLUE LINE”. These window connection foils were developed from sustainable raw materials for both internal and external use. The polymer-based foils provide the same technical properties as foils based on purely synthetic raw materials.
In our tutorial, we show how you can save a lot of time and money with the custom-fit ISO-CONNECT EPDM GASKET for pre-wall installation with metal brackets. The complete installation procedure is clearly explained step by step in the video and the advantages for external window sealing compared to other systems are shown.
ISO-CONNECT INSIDE + OUTSIDE CL - with these special foils trimmed for maximum bonding power you can reliably seal connection joints in windows, doors and panels. Even significant component movements can be permanently compensated with these extremely stretchy yet highly tear-resistant window connection foils. At the same time, adhesion to the substrate is guaranteed by the maximised bonding power. These flexible foils are made from an adaptable soft polymer fleece which can easily be plastered, painted or bonded over.
ISO-CONNECT VARIO SD „PADS” are ready-to-use adhesive pads for spot-masking components and leaks. A perforated tear-off line allows them to be quickly and easily detached from the roll by hand. They are made from an air tight and fleece-coated special foil and are self-adhesive over the entire surface. With its special functionality, the sd-value of the special foil adapts to the seasonal temperature gradients which occur from the inside outwards or the outside inwards. As a result, moisture can be transported to the outside or to the room regardless of the weather conditions, effectively preventing condensation damage.
In our training clip, we show you how you can seal window connection joints safely, easily and in a time-saving manner with ISO-CONNECT VARIO SD. How is the variable window connection film applied? What needs to be taken into account during application and how do the fully self-adhesive COMPLETE and COMPLETE DUO versions make work easier?
ISO-FLAME BRICK S 90 and ISO-FLAME PLUG S 90 are impregnated PUR soft foam moulded parts used as a fire-stop for single cables, cable bundles and pipes (service fire-stops). ISO-FLAME BRICK S 90 is used for rectangular and irregular openings in fire walls and ceilings. Its maximum fire resistance durability is between 60 and 90 minutes. ISO-FLAME PLUG S 90 is used for circular ducts such as core holes, in fire walls and ceilings. Its maximum fire resistance durability is between 60 and 90 minutes. Both products are part of the ISOF-FIRE PROTECTION SYSTEM (https://www.iso-chemie.eu/en/sealing-...). For further information: https://www.iso-chemie.eu/en/sealing
ISO-FLAME KOMBI F 120 is a PUR sealing tape equipped with a special flame-retardant impregnation which withstands fire and smoke for at least 30 to 120 minutes in the event of a fire. Thanks to these characteristics it meets the most stringent fire-protection requirements.
ISO-TOP CONSTRUCTION SHEETS WF3 are made from Thermopore, a high-strength EPS-based construction material. We have been using this material for many years for in front of wall installation with our ISO-TOP WINFRAMER TYPE 3 system. You can even have the ISO-TOP CONSTRUCTION SHEETS WF3 custom manufactured to size: - windowsill connection profiles - supporting profiles - packing strips - for floor-level windows - for adapting roller shutter casings and venetian blind boxes - other shaped parts
ISO-TOP SPRAY PRIMER is a material for pre-treating surfaces to be bonded. It creates an optimum bonding surface for window connection foils, joint sealing tapes and multi-functional joint sealing tapes. Weathering or the roughness of substrates can often make it difficult to create an air tight bond for window connection foils. This unevenness can be optimised by pre-treating with ISO-TOP SPRAY PRIMER. The primer is applied in just one burst of spray. After waiting a short time for the solvent to evaporate, the foil can be applied.
High-quality screws and brackets of the ISO-TOP WF FIXINGS are used for additional mechanical fixing of IN FRONT OF WALL INSTALLATION SYSTEMS ISO-TOP WINFRAMER. Window and door frames need to be mechanically fixed to the supporting frame system for in front of wall installation. - ISO-TOP WINFRAMER ALUMINIUM CONSOLES - ISO-TOP ETB TIE PLATE EL - ISO-TOP JUSTA ETB ANCHOR BA - ISO-TOP JUSTA TT BEARER PLATE - ISO-TOP ADJUSTING TOOL - ISO-TOP WF SCHRAUBEN For further information: https://www.iso-chemie.eu/en/sealing
ISO-TOP WINDOW SILL FORMS are insulating profiles made from XPS polystyrene; this has very high compressive strength and was specially developed as thermal insulation for aluminium lower external window sills. This is always a critical area with respect to heat retention. The ISO-TOP WINDOW SILL FORMS do not simply offer excellent thermal insulation. They also provide a compression-resistant substructure for window sills made from aluminium or mineral materials. For further information: https://www.iso-chemie.eu/en/sealing
Our ISO-TOP WINFRAMER “TYPE 1” E30 IN FRONT OF WALL INSTALLATION SYSTEM was specially designed for use in fire protection facades. The intumescent components of the new PURATHERM E30 material create an expansion effect when exposed to significant heat levels. The system angles and system boards are therefore suitable for applications where there are special fire protection requirements for load transfer from windows and balcony and patio doors. They also provide an optimum base for sealing window connection joints.
Experience how at an altitude of 2,300 metres in the French Alps 3,000 running meters of our multifuncional joint sealing tape ISO-BLOCO ONE was installed under adverse weather condtions to seal the windows of a new 4-star hotel in the popular ski resort of Val Thorens.
The video shows how to pre-assemble the multifunctional joint sealing tape ISO-BLOCO ONE CONTROL for plastic windows under controlled conditions already in the workshop. This is because the pre-compressed multifunctional joint sealing tape is equipped with a robust tear-open wrapping, which ensures the compression of the tape even after opening the roll. The expansion of the joint sealing tape is therefore only triggered after the windows have been installed, by removing the tear-open wrapping. It doesn't get any better than this. Fast installation and maximum control with the ISO-BLOCO ONE CONTROL multi-function joint sealing tape
The video shows the workshop installation of the multifunctional joint sealing tape ISO-BLOCO ONE CONTROL on a wooden window. ISO-BLOCO ONE CONTROL offers the possibility of convenient and controlled pre-assembly of a 3-level seal in a familiar workshop environment. The pre-compressed multi-functional joint sealing tape is equipped with a robust tear-off wrapping, which ensures the compression of the tape even after opening the roll. The expansion of the joint sealing tape is only triggered after the windows have been installed by removing the tear-open wrapping. There's no better way to work! Maximal control with ISO-BLOCO ONE CONTROL
Experience the spectacular renovation of the façade joints of a high-rise building in La Motte Servolex. Over 10,000 running metres of joints were freed of leaking sealant by a skilled industrial climber and resealed with our BG 1 joint sealing tape ISO-BLOCO 600 "PREMIUM EDITION" Find out more about ISO-BLOCO 600 „PREMIUM EDITION“, the all-rounder for new buildings and refurbishment work: https://www.iso-chemie.eu/en/sealing-solutions/sealing-products/pre-compressed-joint-sealing-tapes/iso-bloco-600-premium-edition
The new hybrid technology from ISO-BLOCO HYBRATEC combines the best properties from two worlds – window connection foils and pre-compressed sealing tapes – in a single product. The benefits of this innovative multi-functional sealing tape: - 3-level sealing in a single work step - totally air tight internally - resistant to driving rain to more than 1050 Pa - good acoustic and thermal insulation values - integration of multiple barrier layers creates an optimum drying effect
The video documentary shows in an understandable way how easy it is to professionally seal windows with ISO-BLOCO Reno in old buildings. A film team accompanied a couple of building owners and a window construction company from the consultation, through a discussion with a building energy consultant, to the installation of the new windows with ISO-BLOCO Reno. The live recording during the window replacement confirms that the installation of the sealing and insulation system, which was specially developed for energy-efficient window renovation, is easy to handle and can be applied quickly, safely and without leaving any residue. This is also confirmed by the testimony of the window manufacturer and the installer, who both have their say in the documentary video. Find out how ISO-BLOO RENO improves your energy efficiency for old buildings: https://www.iso-chemie.eu/en/sealing-solutions/sealing-products/multi-functional-sealing-tapes/iso-bloco-reno