MANIFOLDS suppliers

View Supplier

DANFOSS LTD

Danfoss is firmly established as one of the leading suppliers of domestic and commercial heating controls. Its wide product range, covering the majority of system requirements, makes Danfoss the obvious choice when it comes to specifying domestic or commercial heating controls.

Company Logo
Tel: 01895 617000www.danfoss.com
View Supplier

Hep2O UNDERFLOOR HEATING & COOLING

Thermoboard is Wavin UK's branded warm water underfloor heating system. Thermoboard is a complete system which includes underfloor heating pipes, insulation and manifolds. Wavin UFH can be used to heat and cool and be zoned. Thermoboard can be embedded on either solid concrete slab flooring under the screed. Thermoboard can be installed in nearly all types of timber floors including the Part E Robust Standard Detail approved timber floor constructions. For existing floors Wavin ultra thin underfloor heating only raises the floor by only 15mm.

Company Logo
Tel: 01709 856200www.hep2oufh.co.uk
View Supplier

MARLEY PLUMBING & DRAINAGE

Marley Plumbing and Drainage supply and manufacture sustainable drainage systems. Our main product ranges include rainwater systems, underground drainage systems, soil and waste systems, sustainable drainage and HDPE drainage products.

Company Logo
GET YOUR COMPANY LISTED HERE

Get listed

If you supply MANIFOLDS then contact us today! There has never been a better time to promote your company and products with BPi. Get in touch NOW and your company will be available to our millions of users. Send us your details or simply call us.

BPi
Tel: 020 8838 1904   Fax: 020 8838 1905www.bpindex.co.uk
View Supplier

OMNIE UNDERFLOOR HEATING

Omnie Underfloor Heating manufacture, design and supply innovative heating underfloor products for all UK constructions. Creating the perfect living and working environment at the lowest environmental cost is an important feature of all Omnie systems. Excellent comfort conditions can be obtained with low energy consumption and running costs by bringing together good underfloor heating system together with whole house ventilation and heat recovery.

Company Logo
Tel: 01392 363605www.omnie.co.uk
View Supplier

GEORGE FISCHER SALES LTD

George Fischer manufacture and supply a full range of plastic pipes, flexible pipes, pipe fittings and valves. We supply pipes in a wide range of materials including in Malleable Iron, PVC-U, PVC-C, PP, PE, PVDF PVDF-HP and ranges of process control equipment, chemical drainage system dual containment and pre-insulated pipes. Our ranges are for use on hot and cold water services, heating, chilled water and compressed air systems. George Fischer pipes and fittings are suitable for use in a many building services applications such as industrial, residential and hospital buildings.

Company Logo
Tel: 024 7653 5535www.gfps.com
View Supplier

J G SPEEDFIT

The John Guest Group manufacture and supply the Speedfit range of push fit plumbing fittings for heating and hot or cold water supply. Our range of fittings are suitable for both pressurised and combi central heating systems. Our push fit plumbing fittings can be used on both our flexible plastic pipes or copper pipes for either hot or cold water supply. All Speedfit fittings and pipes are tested and approved by WRAS and BSI. Speedfit also supply a complete range of underfloor heating systems including a range of either mains or wireless heating controls.

Company Logo
Tel: 01895 449233www.johnguest.com
View Supplier

OSMA

Suppliers of: Osma Drainage Products, rainwater goods, plastic pipes, soil pipes, underground drainage, drainage channels, gullies, rainwater systems, waste pipes, road drainage, sewage pipes, underground drainage and sewerage.

Company Logo
Tel: 01709 856200www.wavin.com
View Supplier

REHAU BUILDING SOLUTIONS

REHAU RENEWABLE ENERGY division specialises in developing industry leading solutions for sustainable and renewable energy systems. Rehau renewable products in the UK include industrial and commercial underfloor heating systems ideally suited to projects such as schools and hospitals. Based around Rehau's PE-Xa pipework and its renowned Everloc permanent compression sleeve jointing system. Rehau's hot water underfloor heating is a complete underfloor heating solution that includes pipes, insulation, compression fittings and underfloor heating controls. RAUVITHERM and RAUTHERMEX are Rehau ranges of pre-insulated, flexible single or double PE-Xa pipework which is corrosion resistant and very high hydraulic performance, a ideal solution for district heating systems. REHAU offers a complete range of ground source energy probes for the collection and transfer of ground source energy. RAUGEO ground source energy probes are suitable for deep boreholes up to 400m in depth and for for use in domestic ground source energy Rehau supply our compact helix probes. REHAU's AWADUKT Thermo is a pre-condition heat recovery ventilation. AWADUKT draws fresh, filtered air through a network of polypropylene pipes laid 1.5m below ground the pipework allows heat transfer to take place which pre-warms the incoming air by up to 9ºC in winter and cools it by as much as 14ºC in summer

Company Logo
Tel: 01989 762600www.rehau.uk
View Supplier

FLEXSEAL LTD

Flexseal, design and manufacture the most comprehensive range of fully approved low pressure pipe couplings, pipe saddles and pipe adapters suitable for sewerage, drainage, plumbing and vent systems. Fernco pipe couplings can be used with plastic, clay, concrete, cast iron and steel pipes. We also supply our domestic Storm Drain and Commercial Technodrain surface water drainage channels.

Company Logo
Tel: 01226 340222www.flexseal.co.uk
View Supplier

DURAPIPE UK

Durapipe UK is a leading manufacturer of high performance, thermoplastic pipework systems. With 60 years of experience, our portfolio of products are widely used around the World for many different applications. Whether it be pressure pipework for the conveyance of different media such as water, fuel or more aggressive fluids or specialist drainage pipework, the solution will be found within the Durapipe range. Our products are sold and used in a variety of different applications around the World. Through an international distribution network we have a substantial presence in all corners of the World. A number of individual market leading brands are united within Durapipe UK these include Durapipe, Vulcathene, and Guardian, each of which are leading pipework brands within specific markets.

Company Logo
Tel: 01543 471680www.durapipe.co.uk
View Supplier

CONEX BANNINGER

IBP Conex are manufacturers of compression fittings and end feed fittings. Available as push fit plumbing fittings or threaded or solder ring fittings. Supplemented with a large range of valves and associated fittings for plumbers and heating engineers.

Company Logo
Tel: 0121 557 2831www.conexbanninger.com
View Supplier

SAINT GOBAIN PAM UK

Saint-Gobain Pipelines is the leading UK supplier of a range of ductile iron pipes, fittings, valves, manhole covers, gullies and grates as well as being the leading producer of cast iron above and below ground drainage systems. The range includes syphonic cast iron rainwater drains, Steel access covers for commercial and industrial developments, Cast iron rainwater and gutter systems and above and below ground iron drainage pipes and couplings.

Company Logo
Tel: 0115 930 5000www.saint-gobain-pam.co.uk
View Supplier

POLYPIPE TERRAIN LTD

POLYPIPE TERRAIN have been pioneering the development of plastic drainage systems for over 50 years. We are the drainage experts and set the benchmark for quality, installation, flexibility and offer unrivalled product innovation. Our extensive range of engineered above ground drainage pipe products have been designed for commercial buildings and our Terrain Fabrication Service provides bespoke engineered drainage solutions as complete systems - ready to install.

Company Logo
Tel: 01622 795200www.polypipe.com
View Supplier

PEGLER

Pegler Yorkshire are market leaders in the fields of plumbing fittings, taps and valves. Pegler Yorkshire manufacture market leading brands such as TERRIER Radiator Valves, PRESTEX compression fittings and taps, along with leading product developments such as Xpress press fit fittings and TECTITE push fit plumbing fittings.

Company Logo
Tel: 01302 560560www.pegleryorkshire.co.uk
View Supplier

Hep2O PUSH-FIT PLUMBING

Hep2O® is an innovative, flexible, push-fit plastic plumbing system for domestic hot and cold water supply including potable water and central heating. The system comprises flexible straight coil polybutylene pipes connected to polybutylene fittings that incorporate an integral push-fit mechanism. HEP2O fittings are compatible with cooper pipes and include a unique 50 year guarantee.

Company Logo
Tel: 01709 856200www.wavin.com
View Supplier

GEBERIT SALES LTD PIPING SYSTEMS

Geberit Pipes are manufacturers of a range of plumbing fittings, drainage pipes and supply pipes for both domestic and commercial use. Our range includes HDPE drainage pipes which are ideal for chemical drainage. Sound reducing Document E compliant acoustic pipes. Siphonic roof drainage outlets and a range of press fit compression pipe fittings. We also supply flexible hot and cold water supply pipes.

Tel: 01926 516800