PEGLER
Suppliers of: push fit TVR radiator valves PEX plumbing pipe fittings for taps PEX Pipe Fittings
Pegler is well known and respected as one of the leading manufacturers of advanced plumbing, heating and engineering products in the world.
It’s a reputation earned through a total dedication to quality, innovation and customer service that’s been the hallmark of Pegler since the company was established in 1899. Today, Pegler supplies its products to customers in over 110 countries worldwide.
Peglar are committed to saving the resources of the environment. Energy and water conservation is very much at the forefront of product development. Our brands and products include:
Commercial & Industrial Valves
Pegler supply extensive ranges of commissioning, ball and gate valves. Pegler supply push fit, press fit, welded, threaded or flanged valves and compression fittings for industrial and commercial use. Pegler valves are available for copper, stainless steel and carbon steel pipe work up to 54mm. Ballomax® is a range of ball valves for district heating.
Terrier Radiator Valves & Prestex Compression Fittings
Terrier is our range of domestic and commercial radiator valves which includes TVR radiator valves, heating controls and push fit radiator valves. Pegler’s market leading range of Terrier radiator valves now also includes the innovative terrier i-temp, a simple retro fitting programmable push fit radiator valve, that allows each radiator to be individually programmed, resulting in the average 3 bedroomed house saving up to 30% of its annual heating bill.
Prestex is our domestic range of compression fittings and valves that include mixing valves, brass stop valves and bibtaps.
Plumbing and Pipe Fittings
Pegler offer a range of market leading brands for domestic, commercial and industrial use. Our market leading brands for these sectors are Yorkshire integral solder ring pipe fittings for copper pipes.
VSH Tectite a wide range of Push-fit plumbing fittings, valves and controls for use with copper, carbon, stainless steel, PEX and plastic pipe.
VSH XPress are our press fit plumbing fittings and Endex is a range of end feed fittings.
Compression Fittings
Kuterlite 600 and Kuterlite 900 Pro are our range of compression fittings and Prestex is our range of brass compression fittings and valves.
Most of our ranges are available for use with copper, stainless steel, carbon steel and plastic plumbing on central heating systems, hot or cold water supply, gas supply pipes and solar heating systems. For utility fittings we supply Prestex DZR Brass Compression Fittings and Proflow, plastic utility fittings range.
Our products are:
Proven product performance unrivaled choice of market-leading brands More than 10,000 product lines in more than 100 countries worldwide More exciting new products to come every year Free advice and engineering consultancy Supported by all major stockists
For technical and professional help in chosing the right system, the most cost effective installation or for any on-site training to get the most out of your Pegler products please feel free to contact us or use our dedicated help centre for more information:
you can also visit our social media pages for more information about Pegler Yorkshire and up to date new at:
For more technical information please visit our website at www.pegleryorkshire.co.uk or alternatively view our PDF’s in our BPIndex Library.
Pegler Award Winning Dynamic PICV Valve
award-winning dynamic PICV valve
Pegler, the UK leaders in valve technology, has scooped the prestigious Commercial HVAC Product of the Year Award from H&V News for its latest revolutionary dynamic valve.
The driving force behind the global Aalberts integrated piping systems division is the highly experienced Yorkshire-based team that has developed the Pegler Proflow PICV in response to industry challenges.
“The revolutionary Proflow PICV was designed to address common issues found on sites when installing commissioning valves, namely cartridge readjustment and restricted flow velocities; however, its overarching innovation is its status as an isolation and commissioning dynamic valve in one!” commented Sindar Singh, Director of Product Line Valves at Aalberts Integrated Piping Systems UK & ME (Pegler) . “ The key advantage through the innovation of the Pegler Proflow PICV is found in both the installation and commissioning phases - specifically time saved - which equates to 70% less time spent over traditional methods.”
The award-winning dynamic valve offers many more advantages; to assist with ensuring correct flushing velocities are achieved and to remove the risk of system debris, the cartridge in the Pegler Proflow PICV is delivered in a bypass state to ensure a full-bore flush can be completed without the risk of contamination of the cartridge. Thanks to Its advanced design, there is no need to fully remove the cartridge. Therefore, eliminating any risk of flow rate mix up and with a setting memory in both isolation and bypass mode, the system effectively maintains its previous settings: minimising system fluctuations and increasing performance.
Furthermore, the valve allows the flushing of systems without the need for decommissioning. It has been proven, through rigorous testing, to deliver time-saving efficiencies of over a third and cost-saving efficiencies of over half when compared with competitors’ products. The tests showed that when compared with a traditional PICV, the Pegler Proflow PICV can save up to seven hours of labour, compare this to a typical installation of 60 valves, a saving of up to 396 man-hours can be realised. Translated into monetary value, this equates to almost a £12,000 saving.
Sindar concluded: “We are honoured to receive such a coveted industry award, and delighted that our hard work in developing products to address key industry challenges is recognised by our peers and will be used to enhance installations and ongoing efficiencies within building HVAC systems. I would also like to express my sincere thanks to the team who have worked tirelessly to bring to the market such a revolutionary new product.”
A statement from the judging panel said: “Judges were impressed with this very compact and innovative product which should save a lot of maintenance in most installations. They liked the use of the flush bypass, which will reduce any contamination in the installation.
New Pegler ResiFlow Valve Handles the Pressure...
New Pegler ResiFlow Valve Handles the Pressure...
"Aalberts integrated piping systems is continually developing its Pegler range of valve solutions and innovating new products to keep specifiers, building managers, and contractors at the forefront of their profession while increasing efficiencies and performance of our buildings,” said Sindar Singh, Director of Product Line Valve Technology at Aalberts integrated piping systems UK. “After speaking with contractors, water companies, and building managers, the new ResiFlow valve range has been designed specifically to address each of their individual needs to support a more efficient and low maintenance hot and cold potable water application.
The new Pegler ResiFlow valve range is an integrated valve arrangement that converges isolation, drain pressure reduction, and an “adapter free” direct connection for a Class D concentric water meter. The Pegler ResiFlow also has simple access to a check valve and unique streamline insulation that allows flexibility on installation and removal even with the water meter installed.
In addition, the valve range is designed to overcome challenges often found with these types of valves, namely, flow limitation. This valve boasts a larger entry orifice to allow for an increased flow and a pre-set ‘anti-creep’ pressure reducing valve, ensuring continued settings for residents.
The Pegler ResiFlow range consists of two models; firstly, the Pegler ResiFlow RES1 valve comprises many additional benefits such as; a built-in accessible Check Valve, providing easier maintenance, two pressure gauges, either side of the Pressure Reducing valve offering instant and more precise indication for primary and secondary pressure readings. Simplifying the offer further, Pegler ResiFlow has been designed to connect directly to a class D water meter connection, therefore, negating the need (and cost) for an adapter; in addition, a dedicated label on the handle has been provided to identify property/unit number, making maintenance straightforward and efficient. For installation practicality, the length has also been designed to 311mm.
Secondly, the Pegler ResiFlow RES2 version comes complete with all the benefits mentioned previously and then augmented with a secondary ball valve with an integrated drain outlet, saving the need for additional valves built further on in the system. This gives complete flexibility for isolation, a treatment fill point for the individual property, and, therefore, increases the opportunity for greater hygiene.
Furthermore, the Pegler ResiFlow RES2 version provides the ultimate flexibility when it comes to maintenance. The central unit can be removed for any routine inspection or maintenance and provides easy access and serviceability to the check valve as required by Water Regulations in accordance with BS EN 806; The Water Supply (Water Fittings) Regulations 1999.
In addition, consideration has been given to the design of the insulation across the entire range. Often an afterthought in some similar types of valves. The Pegler ResiFlow comes complete with a streamlined EPP recyclable moulded insulation cover which not only looks good but has practical use for maintenance as it can be removed even with the meter connected.
More information about the entire range of Pegler Valves can be found at https://www.pegleryorkshire.co.uk/
