HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS

HOLM OAK BARN
BELUNCLE HALT
STOKE ROAD
HOO, ROCHESTER
KENT ME3 9NT

Tel: 01634 258200
Fax: 01634 250099

Company Logo

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI adjustable mirror w/lever
Range 801 Adjustable mirror - rectangular crystal glass mirror with rounded edges and integrated anti-splinter film - mirror adjustable by max. 28° using cranked cord control and therefore usable in standing or sitting position - for wall mounting - 600 mm wide, 540 mm high and 6 mm thick - mirror is made of plate glass - holding element and crank made of high-quality polyamide in selected HEWI colours - with cord re-routing suitable for prewall installation , Accessibility, Mirror

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Back rest rail 805-51-900
Range 805 Backrest rail - padded backrest with right-angled fixing rails on each side - serves as back support for toilet users - for fitting onto Range 805 hinged support rails - centre-to-centre from 670 to 730 mm, adjustable on site - 220 mm high and 150 mm deep, backrest 350 mm wide, rail diameter 33 mm, tube thickness 2 mm - backpad made of black PUR - made of high-quality stainless steel, satin surface finish - fulfils the DIN 18040 and ÖNORM B1600/1601 requirements Article no.: HEWI 805.51.900 , Accessibility, Back rests

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Back rest rail 950-51-90090
Backrest rail - backrest with mounting brackets attached to both sides - serves as back support for toilet users - installed on support rails with lift-up feature or stationary supports 950.50.... - centre-to-centre from 650 to 700 mm can be adjusted on site, 150 mm deep - backrest 350 mm wide, 390 mm long - backrest made of glass fibre reinforced polyamide - mounting bracket made of metal, powder coated - available in HEWI colours 98 (signal white) and 92 (anthracite grey) - fulfils the DIN 18040 and ÖNORM B1600/1601 requirements Article no.: HEWI 950.51.90090 , Accessibility, Back rests

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI backrest for combination
Range 801 Backrest rail - padded backrest with right-angled fixing rails on each side - serves as back support for toilet users - with continuous, corrosion resistant steel core - for fitting onto hinged support rails or stationary supports with wall mounting plate, adjustable on site - 670 to 730 mm wide, 220 mm high and 150 mm deep, backrest 350 mm wide, rail diameter 33 mm - backpad made of black PUR - made of high-quality polyamide in selected HEWI colours - fulfils the DIN 18040 and ÖNORM B1600/1601 requirements , Accessibility, Back rest rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI ceiling support, A=500
Range 801 Ceiling support - rail made of synthetic material, with fixing rose - for mounting shower curtain rails - with aluminium core - fixed on ceiling with rose - length adjustable by 10 mm and can be shortened at rose by max. 100 mm - 500 mm long, rail diameter 33 mm - made of high-quality polyamide in selected HEWI colours , Sanitary, Ceiling support

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Fire door fitting 111R11-230
Fire door fitting in R-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 111.23R U-shaped made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 23 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. The lever handle meets the standards of EN 179 and DIN 18040. Roses: model 305.23... and 306.23FS roses substructure made of synthetic material-stainless steel composite, can be used for left and right-hand opening doors. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area and second journal in the neck of the lever handle. Concealed, non-loosening screwed joint with M4 screw and sleeve combination as well as the pivot disappearing into the door leaf. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10.5 mm high, flat, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 4 fire door fitting with spindle 9 mm, according to DIN 18273 Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class D1 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: U Article no.: HEWI 111R11.230 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Fire door fitting 111XAH11-130
Fire door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 111X... made of stainless steel tube (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle, for optimal transfer of force to door leaf. The lever handle meets the standards of EN 179 and DIN 18040. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fire door fitting with spindle 9 mm, according to DIN 18273 Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class B1 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 111XAH11.130 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Fire door fitting 162XAH11-230
Fire door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 162X... made of stainless steel tube in mitre cut (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle for optimal transfer of force to door leaf. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fire door fitting with spindle 9 mm, according to DIN 18273 Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class B1 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162XAH11.230 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI fold-up seat 450
Hinged seat 450 - construction consisting of wall bracket and continuous seat - used for safe sitting in the shower area - 450 mm wide, 463 mm deep and 107 mm high - Wall bracket made of high-quality stainless steel, chrome-plated - seat made of glass fibre reinforced polyamide, in the colours white and anthracite grey - ergonomically curved seat shape for a highly comfortable sitting - large radii at the outside edges of the seat reduce the risk of bumps - slip-resistant, textured seat surface - seat can be folded up - seat depth when folded up: 66 mm - no struts and fixings visible in folded up state - combinable with backrest 950.51.02090 - maximum weight capacity 150 kg - for wall mounting with wall-specific HEWI fixing material - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements , Accessibility, Hinged seat

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI fold-up seat R 380
Hinged seat R 380 - construction consisting of wall bracket and continuous seat - used for safe sitting in the shower area - 380 mm wide, 407 mm deep and 107 mm high - Wall bracket made of high-quality stainless steel, chrome-plated - seat made of glass fibre reinforced polyamide, in the colours white and anthracite grey - seat can be folded up - seat depth when folded up: 66 mm - no struts and fixings visible in folded up state - combinable with backrest 950.51.02090 - maximum weight capacity 150 kg - for wall mounting with wall-specific HEWI fixing material , Accessibility, Hinged seat

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI fold-up seat, Komfort
Range 802 LifeSystem White Edition Comfort hinged seat - ergonomically shaped seat with backrest - used for safe sitting in the shower area - seat weight capacity up to 150 kg - seat easy to fold up and down (locks in upper position) - space saving - 444 mm wide, 420 mm high, 455 mm deep - seat 444 mm wide, 380 mm deep - seat height adjustable to four levels from 420 mm to 510 mm (every 30 mm) - easy to install due to separate fixing of HEWI wall plate and seat - concealed, non-corrosive HEWI fixing material for different wall systems - seat and backrest made of high-quality PUR in the two HEWI colours 98 (signal white) and 99 (pure white) - seat with hygienic opening and water run-off - hinge made of white powder-coated aluminium with highly polished chrome design features - armrests can be retrofitted - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements , Accessibility, Hinged seat

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI grab bar, 600mm, chrome
Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of metal, high-quality chrome-plated - outside dimension 600 mm - square profile 25 x 25 mm with large radii, 85 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat, square roses - roses 80 x 80 mm, 10 mm high - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - fixing with grub screw located on the underside of the rose - suitable for HEWI hanging seats 950.51...15..., 950.51...16..., 802.51...15... and 802.51...16... - including non-corrosive HEWI fixing material , Accessibility, Support rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI grab bar, L=600mm
System 800 K Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of high-quality polyamide in HEWI colours 98 (signal white) or 99 (pure white) - with continuous, corrosion resistant steel core - length 600 mm, diameter of rail 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51... - including non-corrosive HEWI fixing material. , Accessibility, Support rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged seat 350950-51-20590
Hinged seat 350 - construction consisting of wall bracket and continuous seat - used for safe sitting in the shower area - 350 mm wide, 373 mm deep and 107 mm high - Wall bracket made of high-quality stainless steel, chrome-plated - seat made of glass fibre reinforced polyamide, in the colours white and anthracite grey - seat can be folded up - seat depth when folded up: 66 mm - no struts and fixings visible in folded up state - combinable with backrest 950.51.02090 - maximum weight capacity 150 kg - for wall mounting with wall-specific HEWI fixing material Article no.: HEWI 950.51.20590 , Accessibility, Seats, Stools

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged seat 801-51-200
Range 801 Hinged seat - made of rails and seat slats - with continuous, corrosion resistant steel core - can be folded up - adjustable seat tilt - used for safe sitting in the shower area - maximum weight capacity 150 kg - wall mounting plate made of polyamide with integrated steel core - mounting on the wall with HEWI wall-specific fixing material made of stainless steel - 345 mm wide, 408 mm deep - seat slats 55 mm wide - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 801.51.200 , Accessibility, Hinged seat

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged seat 801-51-210
Range 801 Hinged seat - made of rails and seat slats - with continuous, corrosion resistant steel core - can be folded up - adjustable seat tilt - used for safe sitting in the shower area - maximum weight capacity 150 kg - wall mounting plate made of polyamide with integrated steel core - mounting on the wall with HEWI wall-specific fixing material made of stainless steel - 448 mm wide, 428 mm deep - seat slats 60 mm wide - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 801.51.210 , Accessibility, Seats, Stools

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail rotatable 801-50-100
Range 801 Hinged support rail (rotatable) - two parallel rails running one above the other joined by a connecting bend - for holding on to and providing support - weight capacity 100 kg - with continuous, corrosion resistant steel core and wall plate made of polyamide with integrated steel core - can be folded upwards and, folded downwards with braking mechanism, in raised position can be turned to left or right towards the wall - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 600 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter - made of high-quality polyamide according to HEWI colour chart - toilet roll holder 801.50.010 and 801.50.011, WC flushing mechanism (radio-controlled) 801.50.060 and floor supports 950.50.021XA and 950.50.023XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 801.50.100 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail rotatable 801-50-110
Range 801 Hinged support rail (rotatable) - two parallel rails running one above the other joined by a connecting bend - for holding on to and providing support - weight capacity 100 kg - with continuous, corrosion resistant steel core and wall plate made of polyamide with integrated steel core - can be folded upwards and, folded downwards with braking mechanism, in raised position can be turned to left or right towards the wall - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 700 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter - made of high-quality polyamide according to HEWI colour chart - toilet roll holder 801.50.010 and 801.50.011, WC flushing mechanism (radio-controlled) 801.50.060 and floor supports 950.50.021XA and 950.50.023XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 801.50.110 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail rotatable 801-50-120
Range 801 Hinged support rail (rotatable) - two parallel rails running one above the other joined by a connecting bend - for holding on to and providing support - weight capacity 100 kg - with continuous, corrosion resistant steel core and wall plate made of polyamide with integrated steel core - can be folded upwards and, folded downwards with braking mechanism, in raised position can be turned to left or right towards the wall - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 850 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter - made of high-quality polyamide according to HEWI colour chart - toilet roll holder 801.50.010 and 801.50.011, WC flushing mechanism (radio-controlled) 801.50.060 and floor supports 950.50.021XA and 950.50.023XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 801.50.120 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail rotatable 805-50-110
Range 805 Classic Hinged support rail (rotatable) - two parallel rails running one above the other joined by a connecting bend (formed of a continuous tube) - for holding on to and providing support - weight capacity 100 kg - wall mounting plate made of polyamide with integrated steel core - can be folded upwards and, folded downwards with braking mechanism, in raised position can be turned to left or right towards the wall - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 700 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter, tube thickness 2 mm - made of high-quality stainless steel, satin surface finish - toilet roll holder 805.50.015 as well as WC flushing mechanism (radio-controlled) 805.50.060 and floor supports 950.50.022XA and 950.50.024XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 805.50.110 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail 801-50-130
Range 801 Hinged support rail (rotatable) - two parallel rails running one above the other joined by a connecting bend - for holding on to and providing support - weight capacity 100 kg - with continuous, corrosion resistant steel core and wall plate made of polyamide with integrated steel core - can be folded upwards and, folded downwards with braking mechanism, in raised position can be turned to left or right towards the wall - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 900 mm projection, 259 mm high and 78 mm wide, 33 mm rail diameter - made of high-quality polyamide according to HEWI colour chart - toilet roll holder 801.50.010 and 801.50.011, WC flushing mechanism (radio-controlled) 801.50.060 and floor supports 950.50.021XA and 950.50.023XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 requirements Article no.: HEWI 801.50.130 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail 801-50-200
Range 801 Hinged support rail - two parallel rails running one above the other joined by a connecting bend - for holding on to and providing support - weight capacity 100 kg - with continuous, corrosion resistant steel core and wall plate made of polyamide with integrated steel core - can be folded upwards and, folded downwards with braking mechanism - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 600 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter - made of high-quality polyamide according to HEWI colour chart - toilet roll holder 801.50.010 and 801.50.011, WC flushing mechanism (radio-controlled) 801.50.060 and floor supports 950.50.021XA and 950.50.023XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040 requirements Article no.: HEWI 801.50.200 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail 801-50-210
Range 801 Hinged support rail - two parallel rails running one above the other joined by a connecting bend - for holding on to and providing support - weight capacity 100 kg - with continuous, corrosion resistant steel core and wall plate made of polyamide with integrated steel core - can be folded upwards and, folded downwards with braking mechanism - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 700 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter - made of high-quality polyamide according to HEWI colour chart - toilet roll holder 801.50.010 and 801.50.011, WC flushing mechanism (radio-controlled) 801.50.060 and floor supports 950.50.021XA and 950.50.023XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 801.50.210 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail 805-50-220
Range 805 Classic Hinged support rail - two parallel rails running one above the other joined by a connecting bend (formed of a continuous tube) - for holding on to and providing support - weight capacity 100 kg - wall mounting plate made of polyamide with integrated steel core - can be folded upwards and, folded downwards with braking mechanism - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 850 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter, tube thickness 2 mm - made of high-quality stainless steel, satin surface finish - toilet roll holder 805.50.015 as well as WC flushing mechanism (radio-controlled) 805.50.060 and floor supports 950.50.022XA and 950.50.024XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 805.50.220 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail Duo 950-50-62040
Hinged support rail Duo - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail made of rectangular profile, 40 mm wide and 30 mm, provides a wide support surface and large radii for pleasant gripping, used to hold on tight and for support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 700 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of metal, high-quality chrome-plated - wall-mounting plate cover made of high-quality chrome-plated synthetic material - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01150, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06490 (right), 950.50.06590 (left), floor supports 950.50.020XA, 950.50.025XA, 950.50.026XA and arm pad 950.50.03192 for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 950.50.62040 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hinged support rail Duo WARM TOUCH 950-50-12050
Hinged support rail Duo System 800 K - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail (diameter 33 mm) for holding on to and providing support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 700 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous anti-corrosion steel core and integrated wall mounting plate made of steel with cover made of chrome-look coated polyamide - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01050, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06290 (right), 950.50.06390 (left), and floor supports 950.50.020XA, 950.50.025XA and 950.50.026XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 950.50.12050 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Holder 477-00-100
Range 477 Holder, small - ring-shaped wall-mounted bracket - serves as holder for tumblers or soap dish inserts - 97 mm wide, 25 mm high and 100 mm deep, insert opening 74 mm in diameter - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.00.100 , Sanitary, Tumbler/ Holder

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hook 162-90-010XA
System 162 Hook - cylindrical hook - made of stainless steel, satin finish - 35 mm long, diameter 15 mm - for wall mounting, concealed fixing - including non-corrosive HEWI fixing material Article no.: HEWI 162.90.010XA , Sanitary, Hooks, Walking aid holders

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hook 477-90-010
Range 477 Single hook (small) - right-angled bend, cylindrical hook with fixing rose - for hanging up towels and other pieces of clothing and other utensils - anti-theft protection through concealed screw fixing - 45 mm deep, rose diameter 50 mm - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.90.010 , Sanitary, Hooks, Walking aid holders

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hygiene bag dispenser 477-06-750
Range 477 Hygiene bag dispenser - cube-shaped body with soft radii - linear and functional in a clear and harmonious design - holds and dispenses proprietary hygiene bags made of synthetic material - for wall mounting - 143 mm wide, 103 mm high and 27 mm deep - made of high-quality polyamide in the HEWI colours - including non-corrosive HEWI fixing material Article no.: HEWI 477.06.750 , Sanitary, Wastepaper bins, hygiene bag dispenser

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hygiene bag dispenser 805-06-700
Range 805 Hygiene bag dispenser - cubic body with recessed wall base - holds and dispenses proprietary hygiene bags made of synthetic material, max. Pack size L 130 x W 90 x H 20 mm - for wall mounting - 150 mm wide, 92 mm high and 37 mm deep - made of high-quality stainless steel, satin surface finish - including non-corrosive HEWI fixing material Article no.: HEWI 805.06.700 , Sanitary, Wastepaper bins, hygiene bag dispenser

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Hygiene combination 805-05-210
Range 805 Hygiene combination - cubic body with recessed wall base - used as container for hygiene waste, capacity approx. 6 l - concealed, integrated bag holder - with an integrated holder for standard hygiene bags made of synthetic material. (max. package size L 130 x B 90 x H 20 mm) - lid with lifting flap - 160 mm wide, 300 mm high and 140 mm deep - for wall mounting - bin and lid made of high-quality stainless steel with satin surface finish - opening made of high-quality polyamide in HEWI 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) - including non-corrosive HEWI fixing material. Article no.: HEWI 805.05.210 , Sanitary, Wastepaper bins, hygiene bag dispenser

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI L-shaped support rail 801-22-100
Range 801 L-shaped support rail - vertical and horizontal bars joined at right-angles with fixing roses made of steel - for holding on to and providing support - with continuous, corrosion resistant steel core - can be mounted in left hand or right hand position - for wall mounting with special HEWI fixing materials and roses - horizontal length 300 mm, vertical length 600 mm, 90 mm deep - bar diameter 33 mm, rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart - toilet roll holder upgrade kit 801.50.010, can be retrofitted Article no.: HEWI 801.22.100 , Accessibility, L-shaped support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI L-shaped support rail 801-22-110
Range 801 L-shaped support rail - vertical and horizontal bars joined at right-angles with fixing roses made of steel - for holding on to and providing support - with continuous, corrosion resistant steel core - can be mounted in left hand or right hand position - for wall mounting with special HEWI fixing materials and roses - horizontal length 400 mm, vertical length 900 mm, 90 mm deep - bar diameter 33 mm, rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart - toilet roll holder upgrade kit 801.50.010, can be retrofitted Article no.: HEWI 801.22.110 , Accessibility, L-shaped support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI L-shaped support rail 801-22-200
Range 801 L-shaped support rail - can be mounted in left hand or right hand position - rails joined at a flat angle and fitted with fixing roses made of steel - for holding on to and providing support - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - centre-to-centre dimensions 295 mm and 325 mm, 135° angle, 200 mm high, 90 mm deep - bar diameter 33 mm, rose diameter 70 mm, - increased stability through 3 mounting supports - made of high-quality polyamide according to HEWI colour chart - toilet roll holder upgrade kit 801.50.010, can be retrofitted Article no.: HEWI 801.22.200 , Accessibility, L-shaped support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI lift-up support rail duo round L850
Hinged support rail Duo System 800 K - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail (diameter 33 mm) for holding on to and providing support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 850 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of high-quality polyamide in HEWI colours 98 (signal white) or 99 (pure white) - with continuous, corrosion resistant steel core and integrated wall mounting plate made of steel with high-quality polyamide cover - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01090, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06290, 950.50.06390 and floor supports 950.50.020XA, 950.50.025XA and 950.50.026XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements , Accessibility, Hinged support rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI lift-up support rail mono round L600
Mono hinged support rail System 800 K - with a horizontal, round gripping level with diameter 33 mm - for holding on to and providing support - 600 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of high-quality polyamide in HEWI colours 98 (signal white) or 99 (pure white) - with continuous, corrosion resistant steel core and integrated wall mounting plate made of steel with high-quality polyamide cover - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01090, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06290 and 950.50.06390 for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040 requirements , Accessibility, Hinged support rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI lift-up support-duo-chr.
Hinged support rail Duo - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail made of rectangular profile, 40 mm wide and 30 mm, provides a wide support surface and large radii for pleasant gripping, used to hold on tight and for support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 850 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of metal, high-quality chrome-plated - wall-mounting plate cover made of high-quality chrome-plated synthetic material - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01150, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06490 (right), 950.50.06590 (left), floor supports 950.50.020XA, 950.50.025XA, 950.50.026XA and arm pad 950.50.03192 for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements , Accessibility, Hinged support rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI lift-up support-mono-chr.
Mono hinged support rail - with a horizontal, two-dimensional gripping level - for holding on to and providing support - rail made of rectangular profile, 40 mm wide and 30 mm, provides a wide support surface and large radii for pleasant gripping - 600 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of metal, high-quality chrome-plated - wall-mounting plate cover made of high-quality chrome-plated synthetic material - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01150, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06490 (right), 950.50.06590 (left) and arm pad 950.50.03192 for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040 requirements , Accessibility, Hinged support rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI lift-up support, fixed
Range 801 Hinged support rail - two parallel rails running one above the other joined by a connecting bend - for holding on to and providing support - weight capacity 100 kg - with continuous, corrosion resistant steel core and wall plate made of polyamide with integrated steel core - can be folded upwards and, folded downwards with braking mechanism - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 850 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter - made of high-quality polyamide in selected HEWI colours - toilet roll holder 801.50.010 and 801.50.011, WC flushing mechanism (radio-controlled) 801.50.060 and floor supports 950.50.021XA and 950.50.023XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements , Accessibility, Hinged support rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Panic bar to EN 1125 PS111XA10
System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA10 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Panic bar to EN 1125 PS111XA20
System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA20 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Panic bar to EN 1125 PS111XA30
System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA30 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Panic bar to EN 1125 PS111XA40
System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA40 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Panic bar to EN 1125 PS160XA10
System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA10 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Panic bar to EN 1125 PS160XA20
System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA20 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Panic bar to EN 1125 PS160XA30
System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA30 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Panic bar to EN 1125 PS160XA40
System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA40 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Paper towel basket 477-05-20012
Range 477 Paper towel basket - rectangular container made of perforated sheet metal with polyamide top - serves as waste bin for used paper towels - removable top holds and covers waste bags - free-standing or wall-mounted - 305 mm wide, 515 mm high and 300 mm deep - perforated sheet metal, white - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.05.20012 , Sanitary, Paper dispensers

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Paper towel dispenser 477-06-60005
Range 477 Paper towel dispenser - rectangular container with edged access opening - for standard paper towels, holds approx. 450 towels - user-friendly dispenser opening - easy to fill and lockable - for wall mounting - 310 mm wide, 459 mm high, 160 mm deep - container made of high-quality white-translucent synthetic material - dispenser opening edges with high-quality polyamide, available according to HEWI colour chart Article no.: HEWI 477.06.60005 , Sanitary, Paper dispensers

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Paper towel dispenser 805-06-500
Range 805 Paper towel dispenser - cubic body with recessed wall base - used to hold standard paper towels with width from 240 - 250 mm and folded length / depth of 90 - 100 mm. (HEWI recommends paper towels with C-fold in folding position) - capacity approx. 300 - 450 paper towels - side level indicator - with locking system as protection against misuse - 300 mm wide, 360 mm high and 120 mm deep, wall-mounted base 15 mm deep - for wall mounting - made of high-quality stainless steel, satin surface finish - opening made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) Article no.: HEWI 805.06.500 , Sanitary, Paper dispensers

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Push/pull handle set 162XADG06
System 162 push/pull handle set for equipping doors or emergency exits For emergency exits: Approval to EN 179 in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634 and 9 mm square spindle. Suitable as operating element on doors to DIN 18040, with accessibility function within operating range at 850 mm above FFL. Handle made of a stainless steel tube, diameter 30 mm, straight handle with straight connection, height 450 mm, width 124 mm, satin surface, backplates made of metal with polyamide cap, maintenance-free plain bearings, mechanical adjustment for the pull handle. Fast installation on the door due to already preassembled pull handles on the bottom section. Installation in pairs, function in opening direction - push, function in opposite direction - pull, with continuous spindle. Classification: spindle 8 mm - no classification spindle 9 mm Designed and tested for projects, classification to EN 179 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class 0, A or B Safety - personal protection: Class 1 Corrosion protection: Class 3 Security - burglary protection: Class 2 Projection of operating element: Class 1 Type of operation: B Field of door application: Class A, B, C or D The classification results only in connection with the lock according to EN 179, for example, BKS, Fuhr or Fliether The selected combinations are assigned freely and do not have to take on a lock manufacturer. For more information, contact HEWI or the lock manufacturer! Article no.: HEWI 162XADG06 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Push/pull handle set FSDG550-08
System 111 push/pull handle set Handle made of polyamide, with steel core diameter 33 mm, closed oval, height 400 mm, width 105 mm, high polished, backplates made of metal with polyamide cap, maintenance-free plain bearings, mechanical adjustment for the pull handle. Fast installation on the door due to already preassembled pull handles on the bottom section. Suitable as operating element on doors to DIN 18040, with accessibility function within operating range at 850 mm above FFL. Contrasting design in coloured polyamide. Installation in pairs, function in opening direction - push, function in opposite direction - pull, with continuous spindle. Classification key: spindle 8 mm - no classification spindle 9 mm Designed and tested for projects, classification to EN 179 Category of use: Class 3 Durability: Class 7 Door weight: Class 6 Use on smoke/fire doors: Class 0. A or B Safety personal security: Class 1 Corrosion resistance: Class 3 Security: Class 2 Security - Burglary protection: Class 1 Type of operation: B Field of door application: Class A, B, C or D The classification results only in connection with the lock according to EN 179, for example, BKS, Fuhr or Fliether The selected combinations are assigned freely and do not have to take on a lock manufacturer. For more information, contact HEWI or the lock manufacturer! Article no.: HEWI FSDG550.08 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Rail with shower head holder 801-33-110
Range 801 Rail with shower head holder - vertical rail with right-angled ends with steel fixing roses and shower head holder - centre-to-centre 900 mm - 90 mm deep, rail diameter 33 mm, rose diameter 70 mm - suitable for shower heads of various manufacturers - shower head holder can be continuously tilted and, after pulling or pushing a large lever, its height can be adjusted - conical adapter on shower head holder makes it easier to hook in the handheld shower head - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 801.33.110 , Accessibility, Shower holders

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Rail with shower head holder 801-33-120
Range 801 Rail with shower head holder - vertical rail with right-angled ends with steel fixing roses and shower head holder - centre-to-centre 1100 mm - 90 mm deep, rail diameter 33 mm, rose diameter 70 mm - suitable for shower heads of various manufacturers - shower head holder can be continuously tilted and, after pulling or pushing a large lever, its height can be adjusted - conical adapter on shower head holder makes it easier to hook in the handheld shower head - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 801.33.120 , Accessibility, Shower holders

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Rail with sideways adjustable vertical support bar and shower head holder 801-35-320
Range 801 Rail with vertical support bar and sliding shower head holder - vertical and horizontal rails joined to form an L shape and fitted with rose fixings and a shower head holder - with vertical rail with shower head holder that can be moved to the side (for installation) - vertical length of 1100 mm, horizontal lengths 962 mm - 90 mm deep, rail diameter 33 mm, rose diameter 70 mm - suitable for shower heads of various manufacturers - shower head holder can be continuously tilted and, after pulling or pushing a large lever, its height can be adjusted - conical adapter on shower head holder makes it easier to hook in the handheld shower head - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - can be mounted in left hand or right hand position - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51... - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 801.35.320 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Rail with vertical support bar and shower head holder 801-35-210
Range 801 Rail with vertical support bar and shower head holder - horizontal and vertical rails joined to form a right angle and fitted with fixing roses made of steel and shower holder - vertical length 1100 mm, horizontal lengths both 762 mm - 90 mm deep, diameter of bar 33 mm, rose diameter 70 mm - suitable for shower heads of various manufacturers - shower head holder adjustable to required angle (smooth adjusting) and height (via lever control) - conical adapter on shower head holder facilitates accommodation of hand spray - with continuous, corrosion resistant steel core - for wall mounting with special fixing kit and roses from HEWI - can be mounted in left hand or right hand position - suitable for all HEWI hanging seats - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 801.35.210 , Accessibility, Shower grab rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Removable hanging seat 950-51-10190
Removable hanging seat - ergonomically shaped seat with backrest - used for safe sitting in the shower area - 450 mm wide, 561 mm deep and 449 mm high (meets the DIN 18040 requirements) - hanging device made of metal, white powder-coated - seat and backrest made of glass fibre reinforced, anthracite grey polyamide - ergonomically curved seat shape for a highly comfortable sitting - large radii at the outside edges of the seat - slip-resistant, textured seat surface - seat can be folded up to save space - no struts and fixings visible in folded up state - carry handle can be lowered when not in use and at the same time acts as a stabiliser - for hanging in HEWI shower grab rails and support rails diameter 33 mm - maximum weight capacity 150 kg Article no.: HEWI 950.51.10190 , Accessibility, Seats, Stools

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI SENSORIC Electronic washbasin fitting AQ1-12S21040
Electronic washbasin fitting - high-quality chrome-plated, round - Flow rate 5 l/min - Mains operation 230 V - for cold and mixed water - Cold water: 3/8" T-distributor necessary, see accessories Art. No. 111736 - Laminar jet controller with dynamic flow control 5 l/min, angle adjustable and anti-theft protection - adjustable, active, nuisance tripping-resistant infrared sensors - Electronic module with adjustable sensing range, hygiene flushing, continuous flushing and cleaning mode - Sensor parameters preset in the factory: after-run time: approx. 1-2 s, continuous running: 4 min, sensing range: 200 mm, cleaning mode: 60 s, hygiene flushing is deactivated - asymmetrical sensing range, stable object detection - settings and service also possible by means of app via smartphone, see accessories Art. No. 65713 - safety shutdown in the event of failure of the operating voltage, user-defined settings are retained - without temperature adjustment lever: highly hygienic, vandal and misuse resistant - the preset temperature lies within the comfort zone from 30°C to 36°C - Temperature settings and adjustment can be easily made during installation due to side access - Connection via flexible pressure hoses with woven-in hot-cold marking 450 mm long, G 3/8" - integrated dirt trap screens - Brass fitting body - 118 mm high, projection 158 mm - rigid outlet - not including waste fittings - Noise class 1 - suitable for thermal disinfection according to DVGW W 551 - conforms EN 15091 - with WELL Label Article no.: HEWI AQ1.12S21040 , Sanitary, Armaturen

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Shelf 477-03-100
Range 477 Shelf - shelf with all-round edge - anti-theft locking system - 600 mm wide, 26 mm high and 140 mm deep - made of high-quality polyamide in HEWI colours 24 (orange), 33 (ruby red), 55 (aqua blue), 74 (apple green), 84 (umber), 86 (sand), 95 (stone grey), 97 (light grey), 98 (signal white), 99 (pure white) - including non-corrosive HEWI fixing material. Article no.: HEWI 477.03.100 , Sanitary, Shelves, Shower baskets

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Shower curtain rail 801-34-400
Range 801 Shower curtain rail - rail with curtain rings - for installing a shower curtain - with aluminum core - fixed onto wall with roses - can be shortened to 200 mm on site - with 10 curtain rings - 1000 mm long, rail diameter 33 mm and rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 801.34.400 , Accessibility, Shower partition, Shower curtain rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Shower curtain rail A1=983
Range 801 Shower curtain rail - horizontal rails joined to form a right angle and fitted with curtain rings - for installing a shower curtain - with aluminium core - fixing with roses to wall and ceiling, ceiling support required - with 20 curtain rings - for shower tray 1000 x 1000 mm (centre-to-centre 983 x 983 mm), rail diameter 33 mm, rose diameter 70 mm - length at rose ends can be shortened on site up to 220 mm - made of high-quality polyamide in selected HEWI colours , Sanitary, Shower curtain rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Shower curtain rail with ceiling support 801-34-1161
Range 801 Shower curtain rail with ceiling support - vertically and horizontally arranged rails connected at right-angles, with curtain rings - for installing a shower curtain - mounted on the wall and ceiling using non-corrosive HEWI fixing materials and roses - curtain rail for shower tray 1200 x 1200 mm, centre-to-centre dimension 1183 x 1183 mm, can be shortened at the ends on site to 220 mm minimum - ceiling support 500 mm long, length can be adjusted by 10 mm and can be shortened at the rose by a maximum of 100 mm - rail diameter 33 mm - with 24 curtain rings - made of high-quality polyamide according to HEWI colour chart - with aluminum core Article no.: HEWI 801.34.1161 , Accessibility, Shower partition, Shower curtain rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI shower head rail,L=1100
System 800 K Rail with shower head holder - vertical rail with supports perpendicular to the wall and roses, with shower head holder - made of high-quality polyamide in HEWI colour 98 (signal white) or 99 (pure white) - shower head holder with black gripping zone - with continuous, corrosion resistant steel core - outside dimension 1100 mm - rail diameter 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - shower head holder can be continuously tilted and, after pulling or pushing a large lever, its height can be adjusted - conical adapter on shower head holder makes it easier to hook in the handheld shower head - suitable for shower heads of various manufacturers - easy installation due to individually installed mounting plates made of high-quality stainless steel for hanging the shower head rail - including non-corrosive HEWI fixing material. , Accessibility, Rail with shower holder

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI shower head rail,L=1100
Rail with shower head holder - vertical rail with supports perpendicular to the wall and roses, with shower head holder - made of metal, high-quality chrome-plated - outside dimension 1100 mm - square profile 25 x 25 mm with large radii, 85 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat, square roses - roses 80 x 80 mm, 10 mm high - cubic shower head holder with 95 mm long function lever for easy use - shower head holder continuously adjustable, suitable for various makes of handheld showers - easy installation due to individually installed mounting plates made of high-quality stainless steel for hanging the shower head rail - fixing with grub screw located on the underside of the rose - including non-corrosive HEWI fixing material , Accessibility, Rail with shower holder

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Shower stool 950-51-30098
Shower stool - mobile, lightweight, shower resistant stool - discreet round tube design combined with an ergonomically curved seat - spacious, pleasantly warm seat made of high-quality synthetic material, slightly textured - with integrated handle recesses for easy sitting down and standing - used for safe sitting in the shower - weight capacity 150 kg - 507 mm high, 489 mm wide - seat 462 mm wide - high-quality chrome-plated frame - equipped with anti-slip feet - seat in HEWI colour 98 (signal white) Article no.: HEWI 950.51.30098 , Accessibility, Seats, Stools

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI shower/tube rail,A1=1100
Range 801 Rail with vertical support bar and sliding shower head holder - vertical and horizontal rails joined to form an L shape and fitted with rose fixings and a shower head holder - with vertical rail with shower head holder that can be moved to the side (for installation) - vertical length of 1100 mm, horizontal lengths 762 mm - 90 mm deep, rail diameter 33 mm, rose diameter 70 mm - suitable for shower heads of various manufacturers - shower head holder can be continuously tilted and, after pulling or pushing a large lever, its height can be adjusted - conical adapter on shower head holder makes it easier to hook in the handheld shower head - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - can be mounted in left hand or right hand position - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51...100 (only on W2) - made of high-quality polyamide in selected HEWI colours , Accessibility, Shower grab rail

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Single lever washbasin mixer tap AQ1-12M10340
Single-lever washbasin mixer tap - high-quality chrome-plate, cubic - Flow rate 5 l/min - Ceramic cartridge Kerox K-35OP, pressure resistant up to 35 bar - Laminar jet controller with dynamic flow control 5 l/min, angle adjustable and anti-theft protection - Connection via flexible pressure hoses with woven-in hot-cold marking 450 mm long, G 3/8 - Brass fitting body - open operating lever with hot-cold marking - 135 mm high, projection 187 mm - rigid outlet - not including waste fittings - suitable for thermal disinfection according to DVGW W 551 - Noise class 1 - DVGW certified - with WELL label Article no.: HEWI AQ1.12M10340 , Sanitary, Armaturen

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Soap dish insert 477-02-01005
Range 477 Small soap dish insert - round soap dish insert made of glass with star-shaped nodules - suitable as insert for small holder (477.00.100) - 25 mm high and 74 mm diameter - made of glass opaque white Article no.: HEWI 477.02.01005 , Sanitary, Soap dishes

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Soap dispenser 477-06-10005
Range 477 Soap dispenser - cylindrical container in ring-shaped, wall-mounted bracket - used to hold standard liquid soap - allows one-hand operation - soap dosage control by means of a large push-button at the front - container can be removed - anti-theft protection through concealed screw fixing - lockable container lid - with wall-mounted base to conceal drill holes - 70 mm wide, 208 mm high, 122 mm deep, diameter of container 75 mm, capacity 500 ml - wall-mounted base and holder made of high-quality polyamide according to HEWI colour chart - push-button made of high-quality polyamide in HEWI colour 92 (anthracite grey) - container and lid made of matt white transparent synthetic material Article no.: HEWI 477.06.10005 , Sanitary, Soap dispensers

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Soap dispenser 805-06-100
Range 805 Soap dispenser - cubic body with recessed wall base - used to hold standard liquid soap - with inner container for free filling, capacity 600 ml - inner container can be removed for cleaning - side level indicator - with locking system as protection against misuse - 95 mm wide, 275 mm high and 95 mm deep, wall-mounted base 10 mm deep - for wall mounting - made of high-quality stainless steel, satin surface finish - lever and functional end made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) Article no.: HEWI 805.06.100 , Sanitary, Soap dispensers

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Spare roll holder 162-21-300XA
System 162 Spare roll holder - cylindrical spare roll holder - made of stainless steel, satin finish - 122 mm long, diameter 15 mm - for wall mounting, concealed fixing - including non-corrosive HEWI fixing material Article no.: HEWI 162.21.300XA , Sanitary, Toilet roll holders

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Standard door fitting 111R01-230
Standard door fitting in R-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 111.23R U-shaped made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 23 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. The lever handle meets the standards of EN 179 and DIN 18040. Roses: model 305.23... and 306.23 roses substructure made of synthetic material-stainless steel composite, can be used for left and right-hand opening doors. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area and second journal in the neck of the lever handle. Concealed, non-loosening screwed joint with M4 screw and sleeve combination as well as the pivot disappearing into the door leaf. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10.5 mm high, flat, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: U Article no.: HEWI 111R01.230 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Standard door fitting 111XAH01-130
Standard door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 111X... made of stainless steel tube (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle, for optimal transfer of force to door leaf. The lever handle meets the standards of EN 179 and DIN 18040. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 111XAH01.130 , Hardware, Functional fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Standard door fitting 162PCH01-230
Standard door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 162.21P... in mitre cut, made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 21.3 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. Roses: model 305.21P... and 306.23, composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10 mm high, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162PCH01.230 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Standard door fitting 162XAH01-230
Standard door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 162X... made of stainless steel tube in mitre cut (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle for optimal transfer of force to door leaf. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162XAH01.230 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Stationary support rail 801-50-300
Range 801 Stationary support - two parallel rails running one above the other joined by a connecting bend - for holding on to and providing support - weight capacity 100 kg - with continuous, corrosion resistant steel core and wall plate made of polyamide with integrated steel core - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 600 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter - made of high-quality polyamide according to HEWI colour chart - toilet roll holder 801.50.010 and 801.50.011, WC flushing mechanism (radio-controlled) 801.50.060 and floor supports 950.50.021XA and 950.50.023XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC Article no.: HEWI 801.50.300 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail 801-36-100
Range 801 Support rail - rail with right-angled bends at the ends and steel fixing roses - for holding on to and providing support - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - centre-to-centre 300 mm - bar diameter 33 mm, rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 801.36.100 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail 801-36-110
Range 801 Support rail - rail with right-angled bends at the ends and steel fixing roses - for holding on to and providing support - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - centre-to-centre 400 mm - bar diameter 33 mm, rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart - suitable for HEWI hanging seats 802.51...11..., 802.51...12... Article no.: HEWI 801.36.110 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail 801-36-120
Range 801 Support rail - rail with right-angled bends at the ends and steel fixing roses - for holding on to and providing support - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - centre-to-centre 500 mm - bar diameter 33 mm, rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51...100 Article no.: HEWI 801.36.120 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail 801-36-130
Range 801 Support rail - rail with right-angled bends at the ends and steel fixing roses - for holding on to and providing support - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - centre-to-centre 600 mm - bar diameter 33 mm, rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51... Article no.: HEWI 801.36.130 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail 801-36-160
Range 801 Support rail - rail with right-angled bends at the ends and steel fixing roses - for holding on to and providing support - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - centre-to-centre 800 mm - bar diameter 33 mm, rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51... Article no.: HEWI 801.36.160 , Accessibility, Hinged and stationary support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail 805-36-100
Range 805 Support rail - rail with right-angled ends and fixing roses - for holding on to and providing support - for wall mounting with special HEWI fixing materials and roses - centre-to-centre 300 mm - bar diameter 33 mm, tube thickness 2 mm, rose diameter 70 mm - made of high-quality stainless steel, satin surface finish Article no.: HEWI 805.36.100 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail 805-36-130
Range 805 Support rail - rail with right-angled ends and fixing roses - for holding on to and providing support - for wall mounting with special HEWI fixing materials and roses - centre-to-centre 600 mm - bar diameter 33 mm, tube thickness 2 mm, rose diameter 70 mm - made of high-quality stainless steel, satin surface finish - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51... Article no.: HEWI 805.36.130 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail WARM TOUCH 950-36-10050
Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous, corrosion resistant steel core - length 300 mm, diameter of rail 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - fixing with grub screw located on the underside of the rose - including non-corrosive HEWI fixing material Article no.: HEWI 950.36.10050 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail WARM TOUCH 950-36-11050
Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous, corrosion resistant steel core - length 400 mm, diameter of rail 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - fixing with grub screw located on the underside of the rose - suitable for HEWI hanging seat 802.51...11... and 802.51...12... - including non-corrosive HEWI fixing material Article no.: HEWI 950.36.11050 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Support rail WARM TOUCH 950-36-13050
Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous, corrosion resistant steel core - length 600 mm, diameter of rail 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - fixing with grub screw located on the underside of the rose - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51... - including non-corrosive HEWI fixing material Article no.: HEWI 950.36.13050 , Accessibility, Support rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI toilet brush unit
Range 801 Toilet brush unit - long brush handle with ergonomic handle grip and brush head made of black polyamide - cone-shaped container with large opening - brush head can be replaced due to bayonet fixing - brush is self-centring when put into container and stands upright automatically - with internal reservoir for disinfectant - container is removable - for wall mounting - 575 mm high, 130 mm wide and 140 mm deep - made of high-quality polyamide in selected HEWI colours , Accessibility, Toilet brush

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Toilet brush unit 162-20-100XA
System 162 Toilet brush unit - toilet brush unit consisting of bracket, toilet brush holder and brush - brush head can be replaced due to bayonet fixing - inner container can be removed for cleaning - made of stainless steel, satin finish - 89 mm wide, 440 mm high, 109 mm deep - for wall mounting, concealed fixing - including non-corrosive HEWI fixing material Article no.: HEWI 162.20.100XA , Sanitary, Toilet brush units

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Toilet brush unit 477-20-100
Range 477 Toilet brush unit - brush handle with replaceable brush head made of black polyamide - brush holder with curved bottom and spherical, semi-open top in ring-shaped bracket - top part can be rotated - container is removable, but can also be fitted to prevent theft - brush head can be replaced due to bayonet fixing - anti-theft protection through concealed screw fixing - 141 mm wide, 470 mm high and 140 mm deep - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.20.100 , Sanitary, Toilet brush units

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Toilet brush unit 805-20-100
Range 805 Classic Toilet brush unit - brush handle with replaceable brush head made of black polyamide - brush holder with curved bottom and spherical, semi-open top in ring-shaped bracket - suspended brush - top part can be rotated - container is removable, but can also be fitted to prevent theft - brush head can be replaced due to bayonet fixing - anti-theft protection through concealed screw fixing - 141 mm wide, 470 mm high and 140 mm deep - container made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) - holder and brush handle made of high-quality stainless steel, satin surface finish Article no.: HEWI 805.20.100 , Sanitary, Toilet brush units

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Toilet brush unit 805-20-200
Range 805 Toilet brush unit - cubic body with recessed wall base - insert conical shaped and removable for cleaning - with inner reservoir for disinfectant - brush handle made of stainless steel, brush head easily replaceable due to bayonet fixing - 100 mm wide, container 285 mm high and 100 mm deep, wall-mounted base 10 mm - for wall mounting - made of high-quality stainless steel, satin surface finish - Insert made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) Article no.: HEWI 805.20.200 , Sanitary, Toilet brush units

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Toilet roll holder 162-21-100XA
System 162 Toilet roll holder - U-shaped holder, mitred, opens on the right - hinged - made of stainless steel, satin finish - 137 mm wide, 110 mm high, 15 mm deep - for wall mounting, concealed fixing - including non-corrosive HEWI fixing material Article no.: HEWI 162.21.100XA , Sanitary, Toilet roll holders

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Toilet roll holder 477-21-100
Range 477 Toilet roll holder - right-angled U-shaped holder - anti-theft protection through concealed screw fixing - 160 mm wide, 120 mm high, rail 20 mm in diameter - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.21.100 , Sanitary, Toilet roll holders

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Toilet roll holder 805-21-100
Range 805 Toilet roll holder - right-angled U-shaped holder - anti-theft protection through concealed screw fixing - 160 mm wide, 120 mm high, rail 20 mm in diameter - made of high-quality stainless steel, satin surface finish Article no.: HEWI 805.21.100 , Sanitary, Toilet roll holders

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Toilet roll holder 805-21-500
Range 805 Toilet roll holder - right-angled bend, U-shaped holder with cubic radii and set-back wall-mounted base - for holding one toilet roll - fixed wall-mounting - 120 mm wide and 90 mm deep - made of high-quality stainless steel strip, 4 mm thick, satin finish surface - including non-corrosive HEWI fixing material Article no.: HEWI 805.21.500 , Sanitary, Toilet roll holders

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Towel rail 477-09-100
Range 477 Towel rail - towel rail with two cylindrical arms arranged above each other - for hanging up towels and other pieces of clothing - the arms can be swung to the side separately - 445 mm long and 160 mm high, diameter of the arms 28 mm - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.09.100 , Sanitary, Towel rails, Bath towel rails

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Tumbler with flat bottom 477-04-020
Range 477 Tumbler with flat bottom - round tumbler with flat bottom - free-standing and suitable as insert for the small holder (477.00.100) - 80 mm high and 74 mm diameter - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.04.020 , Sanitary, Tumbler/ Holder

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Upgrade kit toilet roll holder 805-50-015
Range 805 Classic toilet roll holder upgrade kit - right angle-shaped toilet roll holder made of synthetic material - used for retrofitting on the HEWI rail system and on Range 805 Classic hinged support rails - easy installation - integrated toilet roll brake - 35 mm wide, 131 mm high, 136 mm deep - made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) Article no.: HEWI 805.50.015 , Accessibility, Toilet roll holder

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Upgrade kit WC flushing mechanism (radio-controlled) 801-50-060
WC flushing mechanism upgrade kit (radio controlled) - for retrofitting on HEWI hinged support rail 801.50... - for easy installation - 50 mm wide, 68 mm high, 105 mm long - made of high-quality polyamide according to HEWI colour chart - transmission frequency 868.4 MHz - suitable for radio-controlled WC flushing systems made by Geberit, Friatec, Mepa, Sanit, Viega, TECE and Grohe Article no.: HEWI 801.50.060 , Accessibility, Hinged support rails, Accessories

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI upgrade-kit paper-ro.hld.
Toilet roll holder upgrade kit - right angled add-on toilet roll holder - used for retrofitting on the Range 801 HEWI rail system, diameter 33 mm and on HEWI hinged support rails - easy installation - integrated hard, flexible toilet roll brake - 35 mm wide, 131 mm high, 136 mm deep - made of high-quality polyamide in selected HEWI colours , Accessibility, Toilet roll holder

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Vacant/engaged fitting 111R02-230
Vacant/Engaged fitting in R-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 111.23R U-shaped made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 23 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. The lever handle meets the standards of EN 179 and DIN 18040. Roses: model 305.23... and 306.23NR roses substructure made of synthetic material-stainless steel composite, can be used for left and right-hand opening doors. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area and second journal in the neck of the lever handle. Concealed, non-loosening screwed joint with M4 screw and sleeve combination as well as the pivot disappearing into the door leaf. WC version with emergency opening by means of square spindle or coin and occupancy disc (red/white indicator) on the outside. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10.5 mm high, flat, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: U Article no.: HEWI 111R02.230 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Vacant/engaged fitting 111XAH02-130
Vacant/Engaged fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 111X... made of stainless steel tube (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle, for optimal transfer of force to door leaf. The lever handle meets the standards of EN 179 and DIN 18040. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. WC version with emergency opening by means of square spindle or coin and occupancy disc (red/white indicator) on the outside. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 111XAH02.130 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Vacant/engaged fitting 162PCB02-230
Vacant/Engaged fitting in B-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 162.21P... in mitre cut, made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 21.3 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. Roses: model 305.21P... and 306.23NR, composite synthetic material rose substructure, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with 5 mm Spax screws as well as the pivot disappearing into the door leaf. WC version with emergency opening by means of square spindle or coin and occupancy disc (red/white indicator) on the outside. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10 mm high, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 2 or Class 3 Category of use: Class 2 fitting with spindle 7 mm Category of use: Class 3 fitting with spindle 8 - 8.5 mm Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 0 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162PCB02.230 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Vacant/engaged fitting 162XAH02-230
Vacant/Engaged fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 162X... made of stainless steel tube in mitre cut (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle for optimal transfer of force to door leaf. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. WC version with emergency opening by means of square spindle or coin and occupancy disc (red/white indicator) on the outside. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162XAH02.230 , Hardware, Door fittings

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI washbasin 600mm,1 tap hl.
Washbasin - made of mineral composite with non-porous surface, alpine white - with shelf and round basin - integrated gripping feature on the side, can be used as a towel holder - without overflow - prepared for single hole mixer tap - wheelchair accessible to DIN 18040 and ÖNORM B1600/1601 - weight capacity to EN 14688 - 600 mm wide and 550 mm deep - for hanger bolt fixing - CE marking according to Construction Products Regulation No. 305/2011 , Accessibility, Washbasin

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI washbasin 850mm,1 tap hl.
Washbasin - made of mineral composite with non-porous surface, alpine white - with shelf and oval basin - integrated gripping feature, can be used as a towel holder - without overflow - prepared for single hole mixer tap - wheelchair accessible - weight capacity to EN 14688 - 850 mm wide and 415 mm deep - for hanger bolt fixing - CE marking according to Construction Products Regulation No. 305/2011 - fulfils the ÖNORM B1600/1601 requirements for small basins , Accessibility, Washbasin

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Washbasin M40-11-501
Washbasin - made of mineral composite with non-porous surface, alpine white - with shelf and oval basin - integrated gripping feature on the side, can be used as a towel holder - without overflow - prepared for single hole mixer tap - wheelchair accessible to DIN 18040 and ÖNORM B1600/1601 - weight capacity to EN 14688 - 650 mm wide and 550 mm deep - for hanger bolt fixing - CE marking according to Construction Products Regulation No. 305/2011 Article no.: HEWI M40.11.501 , Sanitary, Washbasins

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI waste bin
Range 477 Waste bin - cylindrical container with hinged lid - removable waste container - lid is opened by applying slight pressure to container with the knee or hand - integrated compartment for standard hygienic bags - only suitable for wall mounting - capacity approx. 6 litres - 330 mm high and 210 mm deep and 180 mm in diameter - made of high-quality polyamide in selected HEWI colours , Sanitary, Waste bin

Published [19/03/19]

HEWI - SANITARY AND ACCESSIBILITY SOLUTIONS: HEWI Wastepaper bin 805-05-100
Range 805 Wastepaper bin - cubic body with recessed wall base - serves as waste bin for used paper towels - capacity approx. 25 l - concealed, integrated bag holder - 300 mm wide, 510 mm high and 170 mm deep, wall-mounted base 15 mm deep - for wall mounting - made of high-quality stainless steel, satin surface finish - opening made of high-quality polyamide in HEWI 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) Article no.: HEWI 805.05.100 , Sanitary, Wastepaper bins, hygiene bag dispenser

Published [19/03/19]