THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: AIRTEC Large Format Block For Walls And Floors
Autoclaved Aerated Concrete (AAC) large format blocks available as flooring and wall blocks.Features and benefits:- Flooring blockDesigned for use in block and beam floors to provide significantly improved thermal insulation of ground floors and quick, easy installation.Can be laid in either the 620 or 430 mm width, offering a choice of reinforced inverted T-beam centre spacing of 705 and 515 mm respectively.Provides an excellent substrate for application of screed and floating floor finishes.Can be easily cut, bored and shaped where required for simple installation around services and are suitable for use with under-floor heating systems.- Wall blockDesigned to provide significantly improved thermal insulation and air-tightness of internal and external walls by reducing the proportion of mortar joints in a wall. If using a thin joint construction this is further reduced by around 87% when compared to conventional walls using 10 mm mortar joints.Freeze/ thaw resistant. Autoclaved aerated concrete (AAC) infill blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Airtec Seven Wall Block
7.3 N aerated concrete block offers the highest structural capacity of the AIRTEC range for construction up to three stories in line with current Building Regulations and Structural Codes.Features and benefits:Freeze/ thaw resistant.The low weight of these blocks and ease of handling offer quick, easy and cost-effective method of construction.Complies with the latest European Standard BS EN 771-4, which exceeds the performance criteria of BS 6073-1.Autoclaved Aerated Concrete (AAC) wall blocks are manufactured to the traditional coursing height of 215 mm and to a length of 620 mm, with a range of thicknesses available from 75–215 mm all with a dimensional accuracy suitable for both general purpose and thin-joint mortar construction.Accessories include AIRTEC Brickettes: Autoclaved Aerated Concrete (AAC) coursing units designed to offer brick-sized (65 x 215 mm) products for use as infill around doors and windows. It's benefits include the following: Eliminates the need for cutting down full-size blocks, maintains material continuity throughout the entire wall thus avoiding the effects of cold-bridging and differential movement which can arise from the use of dissimilar materials, maintains uniform thermal performance throughout the entire wall, reduces the need for cavity closers and reduces pattern staining.AIRTEC Brickettes can be applied on internal and external leaf of cavity walls, loadbearing and non-loadbearing walls, partition walls, thin joint construction and fire resistant walls.BBA certification - 06/4309. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Airtec Standard Wall Block
3.6 N aerated concrete block designed to offer superior thermal performance along with the structural capacity for up to three story construction.Features and benefits:Freeze/thaw resistant. Complies with the latest European Standard BS EN 771-4, which exceeds the performance criteria of BS 6073-1.Autoclaved Aerated Concrete (AAC) wall blocks are manufactured to the traditional coursing height of 215 mm and to a length of 620 mm, with a range of thicknesses available from 75–215 mm all with a dimensional accuracy suitable for both general purpose and thin-joint mortar construction.Accessories include AIRTEC Brickettes: Autoclaved Aerated Concrete (AAC) coursing units designed to offer brick-sized (65 x 215 mm) products for use as infill around doors and windows. It's benefits include the following: Eliminates the need for cutting down full-size blocks, maintains material continuity throughout the entire wall thus avoiding the effects of cold-bridging and differential movement which can arise from the use of dissimilar materials, maintains uniform thermal performance throughout the entire wall, reduces the need for cavity closers and reduces pattern staining.AIRTEC Brickettes can be applied on internal and external leaf of cavity walls, loadbearing and non-loadbearing walls, partition walls, thin joint construction and fire resistant walls.BBA certification - 06/4309. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Airtec XL Wall Block
2.9 N aerated concrete block designed to help reduce the build time onsite, allows the builder to minimize the amount of secondary insulation required to meet the thermal requirements within the Building Regulations (E&W) Approved Document L. The inner leaf of AIRTEC XL blocks give the builder the option of using a 75 mm cavity, either partially or fully filled whilst achieving a U-value: 0.30 W/m²K.Features and benefits:Freeze/ thaw resistant.Complies with the latest European Standard BS EN 771-4, which exceeds the performance criteria of BS 6073-1.Autoclaved Aerated Concrete (AAC) wall blocks are manufactured to the traditional coursing height of 215 mm and to a length of 620 mm, with a range of thicknesses available from 100–215 mm all with a dimensional accuracy.Accessories include AIRTEC Brickettes: Autoclaved Aerated Concrete (AAC) coursing units designed to offer brick-sized (65 x 215 mm) products for use as infill around doors and windows. It's benefits include the following: Eliminates the need for cutting down full-size blocks, maintains material continuity throughout the entire wall thus avoiding the effects of cold-bridging and differential movement which can arise from the use of dissimilar materials, maintains uniform thermal performance throughout the entire wall, reduces the need for cavity closers and reduces pattern staining.AIRTEC Brickettes can be applied on internal and external leaf of cavity walls, loadbearing and non-loadbearing walls, partition walls, thin joint construction and fire resistant walls.BBA certification - 06/4309. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Cellular Dense Concrete Block
Cellular dense concrete blocks offer a lower weight alternative to solid dense blocks with improved thermal properties. Blinded cells on the upper bed face allows for a full bed of mortar and easier build.Features and benefits:Durable and resilient block suitable for high strength, acoustic and decorative applications.Manufactured from Class 2 aggregates and consist of up to 20% recycled raw material.Produced to BS EN 771-3. Aggregate concrete blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Dense Paint-Grade Concrete Block
Close textured dense concrete block for paint grade applications. Aggregate concrete blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Hollow Dense Concrete Block
Hollow dense concrete blocks suitable for agricultural and commercial applications.Features and benefits:Manufactured to BS EN 771-3.Strong, reinforced walls can be constructed quickly and economically.Manufactured from Class 2 aggregates and consist of up to 20% recycled raw material.Standard texture finish provides an excellent surface for mortars, renders and plasters. Aggregate concrete blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Insulite Premier Paint Grade Block
Paint-grade medium dense concrete block. Aggregate concrete blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Insulite Standard Concrete Block
Medium density lightweight aggregate block.Features and benefits:Manufactured to BS EN 771-3. Perfect all round building block.Cost-effective, simple to use and are ideal background block for renders, plasters and for fixing into.Consist of over 90% high quality recycled and reclaimed raw material.Standard textured finish provides an excellent surface for mortars, renders and plasters. Aggregate concrete blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Solid Dense Concrete Block
Solid dense concrete block.Features and benefits:Durable and resilient block suitable for high strength, acoustic and decorative applications.Manufactured from Class 2 aggregates and consist of up to 20% recycled raw material.Produced to BS EN 771-3. Aggregate concrete blocks

Published [04/04/2024]

THOMAS ARMSTRONG (CONCRETE BLOCKS) LTD: Ultralite Concrete Block
Aggregate concrete block designed to offer a low weight, loadbearing block with enhanced thermal properties suitable for a wide range of applications.Features and benefits:Manufactured from expanded clay aggregates.All sizes weight less than 20 kg.Standard texture finish provides an excellent surface for mortars, renders and plasters. Aggregate concrete blocks

Published [04/04/2024]