DALES FABRICATIONS LIMITED

CROMPTON ROAD IND ESTATE
ILKESTON
DERBYSHIRE DE7 4BG

Tel: 0115 930 1521
Fax:

Company Logo

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

DALES FABRICATIONS LIMITED: Bullnose Fascia Systems - Fascia Only
Dales Fabrications Ltd design and manufacture a range of architectural systems incorporating aluminium soffits and fascias. In addition to the standard systems, they can also design and manufacture bespoke systems to suit individual project requirements. Metal finishing trims, Metal finishing trims

Published [10/01/20]

DALES FABRICATIONS LIMITED: Curved Copings - Standard
The Meridian Coping System is a secret fixed, low maintenance, aluminium coping system available in standard and bespoke profiles. Fasteners/ installation: Wind load conditions require the use of visible fasteners on copings installed more than 10 m above ground level. Where copings are to be used on masonry walls, because of the loadings transferred to the structure it is vital that the top courses of the masonry are tied in adequately. In addition, where uneven surfaces are to be capped, or where perforated bricks are utilized, 25 mm thick plywood must be adequately secured to the top of the wall prior to the installation of the coping system. Aluminium coping units, Aluminium coping units

Published [10/01/20]

DALES FABRICATIONS LIMITED: Curved Copings - Weatherstruck
The Meridian Coping System is a secret fixed, low maintenance, aluminium coping system available in standard and bespoke profiles. Fasteners/ installation: Wind load conditions require the use of visible fasteners on copings installed more than 10 m above ground level. Where copings are to be used on masonry walls, because of the loadings transferred to the structure it is vital that the top courses of the masonry are tied in adequately. In addition, where uneven surfaces are to be capped, or where perforated bricks are utilized, 25 mm thick plywood must be adequately secured to the top of the wall prior to the installation of the coping system. Aluminium coping units, Aluminium coping units

Published [10/01/20]

DALES FABRICATIONS LIMITED: Dales Contemporary Round Aluminium Rainwater Pipes 152.4
Dales round aluminium rainwater pipes are available in a variety of sizes. Dales standard pipe brackets are designed to fix the pipe very close to the wall and firmly clamp the pipe into position. This makes it very difficult for vandals to climb. Various non-standard components, e.g. offsets, stand off brackets and special hoppers, are available to suit individual requirements. Accessories: A wide range of standard components are available, however, as manufacturers, Dales Fabrications Ltd are able to offer purpose made components to suit individual project requirements. Fasteners: Consult manufacturer for recommendations. Aluminium rainwater pipe and fittings, Aluminium external rainwater pipelines

Published [10/01/20]

DALES FABRICATIONS LIMITED: Dales Contemporary Square Aluminium Pipe - Square Rainwater Pipe
Dales square aluminium rainwater pipes are available in two standard sizes. Other square pipework can be supplied to order. Dales standard pipe brackets are designed to fix the pipe very close to the wall and firmly clamp the pipe into position. This makes it difficult for vandals to climb. Various non-standard components, e.g. offsets, stand off brackets and special hoppers, are available to suit individual requirements. Accessories: A wide range of standard components are available, however, as manufacturers, Dales Fabrications Ltd are able to offer purpose made components to suit individual project requirements. Fasteners: Consult manufacturer for recommendations. Secret Fix Pipework: Dales square pipe is available with secret fixing and internal pipe jointing. This pipework offers improved security and very clean lines, Contact the manufacturer for details. Aluminium rainwater pipe and fittings, Aluminium external rainwater pipelines

Published [10/01/20]

DALES FABRICATIONS LIMITED: Dales Rectangular Aluminium Pipe - Rectangular Rainwater Pipe
Dales rectangular aluminium rainwater pipework is available in a single standard size. Dales standard pipe brackets are designed to fix the pipe very close to the wall and firmly clamp the pipe into position. This makes it difficult for vandals to climb. Various non-standard components, e.g. offsets, stand off brackets and special hoppers, are available to suit individual requirements. Accessories: A wide range of standard components are available, however, as manufacturers, Dales Fabrications Ltd are able to offer purpose made components to suit individual project requirements. Fasteners: Consult manufacturer for recommendations. Secret Fix Pipework: Dales rectangular pipe is available with secret fixing and internal pipe jointing. This pipework offers improved security and very clean lines, Contact the manufacturer for details. Aluminium rainwater pipe and fittings, Aluminium external rainwater pipelines

Published [10/01/20]

DALES FABRICATIONS LIMITED: Dales Square & Rectangular Aluminium Pipe with Cast Collars 76.2 x 76.2 mm
Dales aluminium rainwater pipes are available in two standard sizes. Other square pipework can be supplied to order. Dales standard pipe brackets are designed to fix the pipe very close to the wall and firmly clamp the pipe into position. This makes it very difficult for vandals to climb. Various non-standard components, e.g. offsets, stand off brackets and special hoppers, are available to suit individual requirements. Accessories: A wide range of standard components are available, however, as manufacturers, Dales Fabrications Ltd are able to offer purpose made components to suit individual project requirements. Fasteners: Consult manufacturer for recommendations. Secret Fix Pipework: Dales square pipe is available with secret fixing and internal pipe jointing. This pipework offers improved security and very clean lines. Contact the manufacturer for details. Aluminium rainwater pipe and fittings, Aluminium external rainwater pipelines

Published [10/01/20]

DALES FABRICATIONS LIMITED: Dales Traditional Round Aluminium Pipe with Cast Collars 152.4
Dales round aluminium rainwater pipes are available in a variety of sizes. Dales standard pipe brackets are designed to fix the pipe very close to the wall and firmly clamp the pipe into position. This makes it very difficult for vandals to climb. Various non-standard components, e.g. offsets, stand off brackets and special hoppers, are available to suit individual requirements. Accessories: A wide range of standard components are available, however, as manufacturers, Dales Fabrications Ltd are able to offer purpose made components to suit individual project requirements. Fasteners: Consult manufacturer for recommendations. Aluminium rainwater pipe and fittings, Aluminium external rainwater pipelines

Published [10/01/20]

DALES FABRICATIONS LIMITED: Elliptical Fascia Systems - Fascia Only
Dales Fabrications Ltd design and manufacture a range of architectural systems incorporating aluminium soffits and fascias. In addition to the standard systems, they can also design and manufacture bespoke systems to suit individual project requirements. Metal finishing trims, Metal finishing trims

Published [10/01/20]

DALES FABRICATIONS LIMITED: Extruded Sigma Fascia Systems - Fascia Only
Dales Fabrications Ltd design and manufacture a range of architectural systems incorporating aluminium soffits and fascias. In addition to the standard systems, they can also design and manufacture bespoke systems to suit individual project requirements. Metal finishing trims, Metal finishing trims

Published [10/01/20]

DALES FABRICATIONS LIMITED: Quadrant Fascia Systems - Fascia Only
Dales Fabrications Ltd design and manufacture a range of architectural systems incorporating aluminium soffits and fascias. In addition to the standard systems, they can also design and manufacture bespoke systems to suit individual project requirements. Metal finishing trims, Metal finishing trims

Published [10/01/20]

DALES FABRICATIONS LIMITED: Ridgeway (Double Sloped) Copings
The Meridian Coping System is a secret fixed, low maintenance, aluminium coping system available in standard and bespoke profiles. Fasteners/ installation: Wind load conditions require the use of visible fasteners on copings installed more than 10 m above ground level. Where copings are to be used on masonry walls, because of the loadings transferred to the structure it is vital that the top courses of the masonry are tied in adequately. In addition, where uneven surfaces are to be capped, or where perforated bricks are utilized, 25 mm thick plywood must be adequately secured to the top of the wall prior to the installation of the coping system. Aluminium coping units, Aluminium coping units

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 100 System - Fixing within Steelwork
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 100 System - Horizontal
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 100 System - Horizontal with Tube
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 100 System - Vertical
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 150 System - Fixing within Steelwork
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 150 System - Horizontal
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 150 System - Horizontal with Tube
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 150 System - Vertical
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 190 Vertical System - Fixing within Steelwork
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 190 Vertical System - Horizontal
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 190 Vertical System - Horizontal with Tube
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 190 Vertical System - Vertical
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 260 System - Fixing within Steelwork
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 260 System - Horizontal
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 260 System - Horizontal with Tube
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 260 System - Vertical
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil units, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Shadex 400 System -Single Blade
Based on three standard blade profiles and three support methods, the Architectural Solar Shading System is individually designed and manufactured on a project-by-project basis. Non-standard designs of blades and supports can also be accommodated to meet special requirements. Aluminium brise-soleil louvre blades, Brise-soleil fixed blade panels

Published [10/01/20]

DALES FABRICATIONS LIMITED: Sigma Fascia Systems - Fascia Only
Dales Fabrications Ltd design and manufacture a range of architectural systems incorporating aluminium soffits and fascias. In addition to the standard systems, they can also design and manufacture bespoke systems to suit individual project requirements. Metal finishing trims, Metal finishing trims

Published [10/01/20]

DALES FABRICATIONS LIMITED: Standard Copings
The Meridian Coping System is a secret fixed, low maintenance, aluminium coping system available in standard and bespoke profiles. Fasteners/ installation: Wind load conditions require the use of visible fasteners on copings installed more than 10 m above ground level. Where copings are to be used on masonry walls, because of the loadings transferred to the structure it is vital that the top courses of the masonry are tied in adequately. In addition, where uneven surfaces are to be capped, or where perforated bricks are utilized, 25 mm thick plywood must be adequately secured to the top of the wall prior to the installation of the coping system. Aluminium coping units, Aluminium coping units

Published [10/01/20]

DALES FABRICATIONS LIMITED: Stepped Fascia Systems - Fascia Only
Dales Fabrications Ltd design and manufacture a range of architectural systems incorporating aluminium soffits and fascias. In addition to the standard systems, they can also design and manufacture bespoke systems to suit individual project requirements. Metal finishing trims, Metal finishing trims

Published [10/01/20]

DALES FABRICATIONS LIMITED: Vertical Fascia System - Fascia Only
Dales Fabrications Ltd design and manufacture a range of architectural systems incorporating aluminium soffits and fascias. In addition to the standard systems, they can also design and manufacture bespoke systems to suit individual project requirements. Metal finishing trims, Metal finishing trims

Published [10/01/20]

DALES FABRICATIONS LIMITED: Weather Struck (Sloped) Copings
The Meridian Coping System is a secret fixed, low maintenance, aluminium coping system available in standard and bespoke profiles. Fasteners/ installation: Wind load conditions require the use of visible fasteners on copings installed more than 10 m above ground level. Where copings are to be used on masonry walls, because of the loadings transferred to the structure it is vital that the top courses of the masonry are tied in adequately. In addition, where uneven surfaces are to be capped, or where perforated bricks are utilized, 25 mm thick plywood must be adequately secured to the top of the wall prior to the installation of the coping system. Aluminium coping units, Aluminium coping units

Published [10/01/20]