weber.set pro lite – rapid is a lightweight, rapid-setting, ultra-flexible (S2), low-dust, cement-based floor tile adhesive for interior and exterior use. It is used to fix all ceramic floor tiles , porcelain, mosaic, quarry, marble, terrazzo and natural stone to most building substrates. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely.

Water-sensitive substrates such as plywood, plaster and plasterboard can be protected from damage by any water that penetrates the tiling layer, by the application of a surface waterproofing layer, known as a tanking system. The most likely places for leaks are in internal corners and around pipes, plugholes, trim etc, so these areas must be treated with care. Once weber.sys protect has been applied and your wet room is completely water-proofed use weber.set plus adhesive to tile your walls. weber.set plus is specially formatted to allow the fixing of large format ceramic, porcelain and natural stone tiles without vertical slip. Finally grout using weber.joint wall with Mould Stop Technology. Tile Grouts, Tile Adhesives, Flexible tile grouts, Tiling Products.

Anhydrite floors have a layer of laitance that needs to be removed before tiling. Once laitance has been removed use weber PR360 to prime your floor. The floor can now be tiled using weber.set rapid plus ECO which contains new innovative Cement Replacement Technology considerably reducing its impact on the environment. Tile Grouts, Tile Adhesives, Tiling Products.

Weber's highly polymer-modified adhesives and grouts have enough flexibility when set to accommodate thermally induced movement. weber.floor flex with Low Dust Technology™ can be used to cover and protect the wires that otherwise could get damaged during application of the adhesive. Once weber.floor flex has dried use weber.set rapid SPF with Low Dust Technology™ to tile your floor. weber.set rapid SPF is specifically formulated to allow the fixing of large format ceramic, porcelain and natural stone tiles. Finally, use weber.joint pro with Mould Stop Technology to grout your floor. weber.joint pro can be applied in joints from 1mm to 10mm. Tile Grouts, Tile Adhesives, Tiling Products.