Suppliers of: Waterproofing Systems, Type C Cavity drainage membranes Drainage pumps, drainage channels, Basement Waterproofing, Concrete Waterproofing, Ground Gas Barriers, Cavity Wall Ties, Damp Proofing,Timber Preservation, Wood Preservatives, Flood Resilience

Triton Chemical Manufacturing Company Limited (Triton Systems) is an established structural waterproofing systems supplier (Types A, B and C as defined in BS 8102 2009).

Key systems include BBA approved TT Admix, used widely in the construction of watertight concrete structures such as commercial and domestic basements, car parks and swimming pools and a range of BBA approved cavity drain membranes.

Triton also supplies flooring systems, ground gas barriers, flood prevention systems, anti-condensation products and a range of traditional timber preservation and DPC products to a network of approved contractors.

Triton is an ISO 9001:2015 Quality Assured Company. Where appropriate, all Triton’s products carry the CE mark.

 

WATERPROOFING

BS 8102: 2009, the code of practice for the protection of below ground structures from water from the ground, defines three types of waterproofing products – Type A, Type B and Type C. Any of these, or a combination of two or more systems, may be specified in a structural waterproofing project.

To make life easier for the specifier or contractor, who ideally will be looking for a single point of supply and support, Triton supplies a comprehensive range of each type of system. This includes:

•  Cavity drain membranes (Type C)

• Watertight concrete (Type B)

• Fully bonded sheet systems (Type A)

• Liquid applied systems (Type A)  

• Cementitious systems (Type A)

For those looking for waterproofing advice around ICF construction projects, please follow this link where we offer advice about using Type A, B & C waterproofing systems with ICF systems and also links to our ICF industry partners.

TIMBER AND DAMP PROOFING

As damp proofing specialists, Triton supplies a range of timber and masonry preservation systems, chemical damp proofing systems, external water repellents and epoxy based products for timber repair.

Key products in our range of injectable formulations to combat rising damp and to damp proof masonry include;

• BBA certified Triton Tri-Gel, a ready to use, water based gel that forms a water repellent silicone resin network within the capillaries of brick, stone and other substrates

• Triton Tri-Cream silicone emulsion cream

• BBA approved Triton Triject 3 fluid concentrate which reacts with Carbon Dioxide to form a permanent water repellent coating within the capillaries of the masonry

Water resistant mortars, additives and primers complement these products.  Our external water repellents include waterproof Triton Triproof Cream that resists damp penetration, improves the thermal performance of walls and provides flood resilience.

As timber treatment specialists, we supply systems designed to damp proof wood and to protect against wood boring insects and wood destroying fungi. Choose Tritec 60 and Tritec 60 Plus or boron based Tribor 20 and Tribor Ten. Triton Trisol 23 should be specified for the sterilisation of masonry infected with Dry Rot fungus.

Our timber repair systems include epoxy based coatings, grouts, consolidants and adhesives, which are designed for the repair of voids or bearing ends in timber affected by insect attack or rot. Our technical team can advise on which of these systems will be most effective for your project and tell you which ancillaries you will need.

ROOFING AND DECKING

Triton’s range of roof waterproofing and deck waterproofing products includes liquid applied waterproofing systems, sheet membranes and high quality Isola Roofing Shingles. Speak to your local Triton Regional Manager for more information and which ancillary products are required for your project.

Please choose one of the following categories:

• Liquid Applied Systems (Roofing and Decking)

• Sheet Membranes (Roofing and Decking)

• Shingles & Metal Roofing

FLOORING

Triton supplies a range of sheet membranes and liquid applied systems to waterproof all types of flooring substrates in existing and new building constructions. Please speak to your local Triton Regional Manager for further information and the most appropriate ancillary products for your floor waterproofing projects.

Please choose one of the following categories:

• Liquid Applied Systems (Flooring)

• Sheet Membranes (Flooring)

PUMPS & DRAINAGE

Triton offers an extensive range of pumps, sumps, drainage channels and alarms as an integral part of its Platon cavity membrane waterproofing system. These provide effective mechanical drainage solutions for all below ground structures where a cavity drain system is being installed.

Please choose one of the following categories:

• Drainage

• Pump Systems

STRUCTURAL REPAIR & PROTECTION

• Cavity Wall Ties and Structural Repair Systems - Triton’s wall ties are manufactured from stainless steel to avoid corrosion and are either mechanically fixed, resin bonded or a combination of both. Mechanically fixed replacement cavity wall ties are most suited to structures of known strength on both the inner and outer skin. When the strength is unknown, resin bonded replacement cavity wall ties are most suitable. In addition to replacement wall ties, lateral restraints and crack stitching rods, Triton also offers a range of ancillary products including resins, grouts and drill bits to facilitate installation.

• Ancillaries – Structural Repair Systems - Triton supplies a full range of ancillary products for the installation of wall ties and other structural repair systems. The range includes resins, grouts, drill bits and a repair mortar.

GAS PROTECTION

Triton supplies a range of ground gas barrier systems to protect buildings from the ingress of Radon, Methane, Carbon Dioxide, Hydrocarbon gases and VOCs. Their installation will help specifiers and installers conform to the requirements of BS 8485:2015 – the Code of practice for the design of protective measures for methane and carbon dioxide ground gases for new buildings. Certain products in Triton’s range of ground gas barrier systems also perform as Type A waterproofing systems as defined in BS 8102:2009 – the Code of practice for the protection of below ground structures from water from the ground.

CONDENSATION SOLUTIONS

Condensation is the most common cause of dampness in buildings and affects properties of all types and ages. In particular, it is directly associated with black mould growth. People living in homes where damp and mould are present are more likely to have respiratory problems and conditions such as allergies and asthma can be exacerbated. The presence of damp and mould can also affect the immune system.

Triton offers a comprehensive range of condensation solutions to both control and prevent all types of condensation. These include window condensation, condensation on walls, loft condensation and condensation in bathrooms.  Methods of ventilation available from Triton to stop condensation include passive air vents, designed to ventilate bedrooms and living rooms, extractor fans for continuous ventilation, heat recovery ventilators that are ideal to control condensation in high rise accommodation, and positive pressure units for draught-free ventilation throughout a building.

GREEN ROOFS

Green roofs deliver many benefits – particularly to urban areas. They insulate and protect roofing materials, clean the air and help to counteract climate change.

Green roofs provide micro-climates for insects and bird life, and create fabulous spaces for work and leisure. A variety of imaginative and inspirational green roofs exist across the country, which vary from simple Sedum layers on single story extensions to areas of green lawn, disguising the roofs of underground car parks. They can also comprise wild flower gardens on the roofs of inner city estates; the most notable of which being the corporate oasis in Canary Wharf.

List all press releases