EUROBRICK SYSTEMS LTD

UNIT 5, NEWBRIDGE TRADING ESTATE
NEWBRIDGE CLOSE
BRISTOL
AVON BS4 4AX

Tel: 0117 971 7117
Fax: info@eurobrick.co.uk

Company Logo

Suppliers of: Brick slips, brick slip systems, non-com cladding, non-combustible cladding, A1 fire rated, A1 cladding, brick slip cladding, rainscreen systems, A1 Euro Classification, A1 rainscreen, rainscreen cladding, brick cladding, external brick cladding

Eurobrick are suppliers of brick and stone slip cladding systems and was the first to introduce a fully integrated insulated brick slip system to the UK in 1990. Since then, Eurobrick has developed further systems to meet the evolving demands of the construction industry and is the UK’s leading specialist for brick and stone slip cladding and one of the largest stockists of brick slips. Eurobrick is an ISO 9001:2015 and ISO 14001:2015 accredited company.

Eurobrick’s brick slip cladding systems provide the real look, feel and durability of traditional masonry with the benefit of being extremely versatile and quick to install. The systems have a broad range of applications, including high rise buildings, new build, rainscreen, modular and refurbishment of commercial and domestic buildings. It is robust and can be installed both on and off site, internally and externally to most construction types.

PRODUCTS

A-Clad

A-Clad is Eurobrick’s non-combustible brick-faced rainscreen system, which is suitable for installation on buildings of any height. The system is designed to be fixed directly to metal rail systems. The complete system has been comprehensively tested and test data is available on request. 

  • A-Clad has Euro Classification of Reaction to Fire EN13501-1:2018; A1

X-Clad

Eurobrick’s original brick slip faced system is lightweight and suitable for a range of applications including new build as an external wall finish or retrofitting as external wall insulation (EWI). The extruded, closed cell polystyrene backer panel is available in different thicknesses; 17, 25, 50, 75 and 100mm.  X-Clad is suitable for installation on residential buildings up to 11m and up to 18m on commercial buildings. Used as an EWI, X-Clad will significantly increase the energy efficiency of a building and improve internal comfort conditions for occupiers. Project specific U-Value calculations are available upon request.

X-Clad achieves the following Euro Classification of Reaction to Fire:  

  • 17mm thick X-Clad Euro Classification of Reaction to Fire EN 13501-1: 2018; Class B- s1, d0
  • 50mm thick X-Clad Euro Classification of Reaction to Fire EN 13501-1: 2018; Class B- s1, d0
  • 100mm thick X-Clad Euro Classification of Reaction to Fire EN 13501-1: 2018; Class E

I-Clad

Developed for interior applications, for fixing to battens or timber/ light gauge steel stud walling systems. I-Clad has a slim profile, plasterboard backer panel and is suitable for both commercial and domestic interiors.

  • I-Clad has Euro Classification of Reaction to Fire EN13501-1:2018; Class B-s1, d0.

P-Clad

Designed for use as a rainscreen system for structures requiring a cavity behind the cladding. P-Clad can be fixed to battens or metal rail systems and may be installed on residential buildings up to 11m in height and on commercial buildings up to 18m. 

  • P-Clad achieves Euro Classification of Reaction to Fire EN13501-1:2018; Class B-s1, d0.

V-Clad

A budget system suitable for new build and refurbishment projects, internal and external. V-Clad is a 20mm thick lightweight expanded polystyrene panel with a ribbed profile for easy installation of the brick slips.

HOW THE SYSTEMS WORK

Eurobrick’s systems are quick and simple to install. Each system has a backer panel with a ribbed profile for easy alignment of the brick courses. The panels are mechanically fixed and the brick slips are stuck between the ribs using the appropriate adhesive. To complete the installation, Eurobrick’s Europoint pointing mortar is piped into the joints and tooled to achieve a traditional masonry finish.

The cladding systems are supplied as component parts comprising; system backer panel, panel fasteners, adhesive, facing brick slips and Europoint pointing mortar. Eurobrick also supply other system components including corner bricks, base trim and tools for installation.

For information regarding installation, please refer to the system specific installation instructions, view the installation videos or call Eurobrick’s technical department.

BRICK SLIP RANGES

Eurobrick offer selection of brick slip colours and finishes. The Britannia and Classic ranges of brick slips are manufactured in standard UK metric sizes, with corner bricks available.

Britannia Range: Kiln fired, extruded brick slips typically 15mm thick

Classic Range: Kiln fired stock bricks specially cut to fit the system, typically 20-25mm thick

Stone: Reconstituted or natural stone products can be sourced if required- lead times for these are variable.

For Eurobrick’s online gallery showing the brick slips available within the ranges, please visit www.eurobrick.co.uk

SHOWROOM

To view Eurobrick’s brick ranges and systems, they have a showroom located at their premises in Bristol. Open Monday to Friday (excluding bank holidays) 9am- 4.30pm.

BRICK MATCHING SERVICE

Eurobrick also offers a brick matching and cutting service for customers who require a specific brick type for a project.

POINTING MORTAR

Eurobrick’s Europoint pointing mortar is ready to mix dry powder product supplied in 25kg bags. Europoint has been specially formulated so it can be piped into the brick joints using a pointing bag or gun. The mortar is available in eight standard colours. For large projects, special colours can be produced to client requirements. Europoint was extensively tested as an individual component of the A-Clad system and is a non-combustible product, achieving A1 fire rating.

REASONS TO USE EUROBRICK’S CLADDING SYSTEMS

  • Specialists in sector with over 35 years’ experience
  • Trusted brand; extensively tried and tested
  • Excellent customer service and technical support at every stage of the project
  • Simple products for quick and straightforward installation
  • Installation is off critical path of building schedule
  • Lightweight systems, ideal in situations where weight restrictions prevent use of traditional construction
  • Robust and extremely low maintenance
  • Suitable for both on and off-site installation

ACCREDITATION

Eurobrick Systems Ltd is an ISO 9001:2015 and ISO 14001:2015 accredited company.

SHOWROOM

To view Eurobrick’s brick and stone ranges and systems, they have a showroom located at their premises in Bristol. Open Monday to Friday, 9am- 4.30pm.

For more information, please visit Eurobrick’s website, email info@eurobrick.co.uk or call 0117 971 7117.

ARCHITECTURAL Claddings
BRICK CLADDING SYSTEMS AGREMENT CERTIFICATE HOLDERS
BRICK CLADDING SYSTEMS Fire Resistant Applications Above 18 Metres
BRICK CLADDING SYSTEMS Insulated
BRICK MODULES Pre-Assembled
BRICK PANEL SYSTEMS External
BRICK PANEL SYSTEMS Insulated
BRICK PANEL SYSTEMS Internal
BRICK PANEL SYSTEMS Mortarless Insulated
BRICK SLIP INSTALLATION ACCESSORIES
BRICK SLIP SUPPORT SYSTEMS Cladding Systems AGREMENT CERTIFICATE HOLDERS
BRICK SLIP SUPPORT SYSTEMS EWI Systems (External Wall Insulation Systems)
BRICK SLIPS Brick
BRICK SLIPS Cast Stone (Reconstructed Stone)
BRICK SLIPS Natural Stone
BRICK SLIPS Special Shapes
BRICKS Facing, by Type: Modular Units
BRICKS Facing, by Type: Pre-Assembled Units
BRICKS Facing, by Type: Pre-Assembled Units Feature
BRICKS Thin Bricks
BRICKWORK Prefabricated Panels
CLADDING TILES Brick
CLADDINGS and FACINGS See CLADDINGS EXTERNAL:
CLADDINGS EXTERNAL BRE Certified
CLADDINGS EXTERNAL Brick
CLADDINGS EXTERNAL Brick Mortarless Insulated Panel Systems
CLADDINGS EXTERNAL Brick Pre-Assembled Prefabricated
CLADDINGS EXTERNAL Brick Faced
CLADDINGS EXTERNAL Brick Faced BRE Certified
CLADDINGS EXTERNAL Brick Faced BS 8414-2:2005 BR135 Annex B:2013 Compliant
CLADDINGS EXTERNAL Brick Faced Insulated Panel Systems
CLADDINGS EXTERNAL Brick Faced LANTAC Approved
CLADDINGS EXTERNAL Brick Faced Refurbishment
CLADDINGS EXTERNAL Brick Slip Panels
CLADDINGS EXTERNAL Brick Slip Panels AGREMENT CERTIFICATE HOLDERS
CLADDINGS EXTERNAL Brick Slip Panels Brick Strips
CLADDINGS EXTERNAL Brick Slip Panels Brick Strips Insulated Panel Systems
CLADDINGS EXTERNAL Brick Slip Panels Fire Resistant Applications Above 18 Metres
CLADDINGS EXTERNAL Brick Slip Panels Insulated Panels
CLADDINGS EXTERNAL BS 476:1987 Part 7 Class 0
CLADDINGS EXTERNAL Cast Stone (Reconstructed Stone) Finish
CLADDINGS EXTERNAL External Wall Insulation Systems (EWI Systems) .See Also EXTERNAL WALL INSULATION SYSTEMS EW1
CLADDINGS EXTERNAL Fire Proof Non-Combustible
CLADDINGS EXTERNAL Fire Resistant
CLADDINGS EXTERNAL Fire Resistant EN 13501-1
CLADDINGS EXTERNAL Fire Resistant EN 13501-1 Euro Class B
CLADDINGS EXTERNAL Fire Resistant EN 13501-1 European Fire Class A1 Fire Rated
CLADDINGS EXTERNAL Fire Retardant BS476 Class 0
CLADDINGS EXTERNAL High Rise Buildings / Skyscapers
CLADDINGS EXTERNAL Insulated
CLADDINGS EXTERNAL Insulated Cast Stone (Reconstructed Stone) Faced
CLADDINGS EXTERNAL Insulated Refurbishment
CLADDINGS EXTERNAL Non-Combustible
CLADDINGS EXTERNAL Precast Concrete Panels
CLADDINGS EXTERNAL Stone Faced
CLADDINGS EXTERNAL Stone Faced Insulated Panel Systems
CLADDINGS INTERNAL Brick Slip Faced Panels
CLADDINGS INTERNAL Brick Slip Faced Panels AGREMENT CERTIFICATE HOLDERS
CLADDINGS INTERNAL Fire Rated BS EN 13501-1 Class B-s1, d0.
CLADDINGS INTERNAL Tile Effect
ETICS EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS .See Also EXTERNAL WALL INSULATION SYSTEMS EWI
EWI EXTERNAL WALL INSULATION SYSTEMS .See Also EXTERNAL WALL INSULATION SYSTEMS EWI
EXTERNAL WALL INSULATION SYSTEMS EW1 Brick Faced
EXTERNAL WALL INSULATION SYSTEMS EW1 Brick Faced AGREMENT CERTIFICATE HOLDERS
EXTERNAL WALL INSULATION SYSTEMS EW1 EWI Energy Company Obligation Scheme (ECO)Approved
EXTERNAL WALL INSULATION SYSTEMS EW1 Solid Wall Insulation Systems
FACADE SYSTEMS EWI ETICS EIFS (External Wall Insulation Systems) .See Also EXTERNAL WALL INSULATION SYSTEMS EWI
FACADES Architectural Insulated Panels
FACADES Architectural Insulated Panels Mortarless Brick Faced
FACADES Mortarless Brick Insulated Panel
INSULATED BRICK CLADDING Insulated Brick Slips See Also CLADDINGS EXTERNAL:
INSULATION EXTERNAL BOARD Brick Slip Finish
INSULATION EXTERNAL BOARD EWI ETICS EIFS .See Also EXTERNAL WALL INSULATION SYSTEMS EWI:
MORTARS Pointing Repointing
MORTARS Pointing Repointing Coloured
MORTARS Pointing Repointing Non-Combustible EN 13501-1 Class A1
PANELS Decorative
PANELS Insulating
QUOINS Cast Stone (Reconstructed Stone)
RAINSCREEN SYSTEMS A1 Euro Classification
RAINSCREEN SYSTEMS Brick
RAINSCREEN SYSTEMS Brick Slip Systems
RAINSCREEN SYSTEMS Brick Slip Systems High Rise Buildings over 18 Metres Tall
RAINSCREEN SYSTEMS Brick Slip Systems Non-Combustible EN 13501-1 Class A1
WALL CLADDINGS EXTERNAL .See Also CLADDINGS EXTERNAL
WALL TILES Brick
BRADSTONE RANGE Reconstructed Stone Slips
BRICK RANGE Brick Cladding System
BRITANNIA RANGE Brick Slips
EUROBRICK A-CLAD Non-Combustible Rainscreen System
EUROBRICK BRADSTONE RANGE Brick Cladding System
EUROBRICK BRICK CLADDING Brick Cladding Systems
EUROBRICK CLASSIC RANGE Brick Cladding Systems
EUROBRICK I-CLAD Cladding Panels
EUROBRICK LIBERTY RANGE Brick Cladding System
EUROBRICK P-CLAD Cladding Panels
EUROBRICK SYSTEM Brick Cladding System
EUROBRICK V-CLAD Brick Faced External Wall Insulation EWI
EUROBRICK X-CLAD Brick Faced External Wall Insulation EWI
EUROPOINT Mortar
STONE RANGE Brick Slips

Eurobrick Exterior brick slip cladding: Common questions answered

November 2026

Brick has long been one of the most popular finishes for buildings in the UK, valued for its durability, appearance and ability to complement both traditional and contemporary architecture. However, achieving a brick finish does not always mean building with traditional full bricks.

Exterior brick slip cladding provides an alternative way to create the appearance of conventional brickwork, while offering greater flexibility in terms of weight, wall build-up and construction method.

Following on from our first FAQs blog, Brick slips explained: FAQs for homeowners and DIY projects, we answer some of the questions we are most frequently asked about using brick slips externally.
Can brick slips be used externally?

Yes. Brick slips can be used to create an authentic brick finish on the exterior of both new and existing buildings.

It is important to choose brick slips that are suitable for external use. Quality kiln-fired clay brick slips are durable and frost resistant, making them suitable for exposure to the British weather.

However, the brick slips themselves are only one part of the finished façade. The complete cladding system, substrate, fixings, adhesive and pointing mortar all need to be appropriate for the building and its location.

Exterior brick slip cladding can be used across a wide range of projects, including:

New-build homes
Extensions and renovations
Timber frame buildings
Modular and offsite construction
Commercial buildings
Retail and leisure developments
Residential developments
Public sector buildings

What is exterior brick cladding?

Exterior brick cladding is a non-structural finish designed to give a building the appearance of traditional brickwork.

Unlike a conventional brick wall, where full bricks form part of the wall construction, brick slip cladding uses thin brick slips fixed to a backing system. Once the slips have been installed and pointed with mortar, the finished façade is virtually indistinguishable from traditional brickwork.

Because the brick slips are much thinner than full bricks, the overall system is generally lighter and takes up less space. This makes brick slip cladding particularly useful where weight, wall thickness or construction method are important considerations.
Can brick tiles be used outside?

The terms brick tile and brick slip are often used interchangeably, but not every product sold as a brick tile will necessarily be suitable for exterior use.

For an external project, it is important to check that the brick slips or tiles have been manufactured for exterior applications and are frost resistant.

The method of installation is equally important. Exterior brick slips should form part of a suitable cladding system designed for the particular building, substrate and exposure conditions.
How do you install exterior brick slips?

The installation method will depend on the type of building and the brick slip system being used.

Eurobrick systems use a backer panel which is mechanically fixed to the building substrate or supporting structure. Brick slips are then fixed to the panel with adhesive before the joints are pointed with mortar to create the finished appearance.

Different projects require different approaches. For example, an insulated system may be suitable where additional thermal performance is required, while other buildings may require a drained and ventilated cavity or a non-combustible rainscreen solution.

This is why it is important to select the cladding system according to the requirements of the whole building rather than choosing the brick slips in isolation.

Eurobrick offers a range of systems for exterior applications, including:

X-Clad – an external wall insulation system available with different insulation thicknesses
P-Clad – a brick slip rainscreen system installed onto battens or rails to create a drained and ventilated cavity
A-Clad – an A1-rated non-combustible brick slip rainscreen system suitable for buildings of any height
V-Clad – a budget external cladding system suitable for extensions, renovation and low-rise applications

Our technical team can advise on the most appropriate system for your project.
What are the benefits of exterior brick slip cladding?

Brick slip cladding combines the appearance of traditional brickwork with a number of practical advantages.

Depending on the system and project, benefits can include:

An authentic real-brick finish
Lightweight and non-structural
A slimmer wall build-up
Greater flexibility around different construction methods
Options to incorporate insulation within the wall build-up
Straight forward and fast installation
Suitability for offsite and modular construction
Use on both new-build and refurbishment projects
A wide choice of brick colours, textures and finishes

Brick slips can also be combined with other façade materials such as render, timber or metal cladding, giving architects and homeowners considerable flexibility when designing an exterior.
Did you know?
Brick slip cladding can be used to transform an existing building as well as create the brick façade on a completely new development.

Is brick slip cladding cheaper than whole bricks?

There is no simple answer, as the overall cost will depend on the design and construction of the building.

Comparing the price of a brick slip with the price of a full brick does not give a true picture of the overall project cost. The complete wall build-up, supporting structure, foundations, labour, installation time, access and programme all need to be considered.

Because brick slip systems are considerably lighter than traditional brickwork, they can reduce structural loading and may allow for a simpler wall build-up. They can also be quicker to install and are well suited to modern methods of construction and offsite manufacture.

For refurbishment projects, brick slip cladding can provide a practical way to create a new brick finish without the space and structural requirements associated with constructing a traditional masonry wall.

Savings can be made through a simpler and faster project delivery. However, the most appropriate solution should be assessed based on the requirements and whole-life cost of the individual project rather than the cost of the facing material alone.
Can exterior brick slips be used on existing buildings?
Wilford House project

Yes. Brick slip cladding is widely used for renovation and refurbishment as well as new construction.

Its relatively low weight and slim profile can make it particularly useful where a traditionally constructed brick wall would add too much weight or require significant alterations to the existing structure.

Depending on the building and system selected, exterior brick slip cladding can also provide an opportunity to incorporate additional insulation as part of refurbishment works. This will enhance the energy efficiency of the building and significantly improve the comfort conditions experienced by the occupants.

The existing substrate and structure should always be assessed to establish the most suitable system and fixing method.
Do brick slips look like real bricks?

Yes. Kiln fired clay brick slips are real bricks only thinner and have the same colour, texture and variation as full bricks.

Corner slips can be used around external corners, window reveals and other details to maintain the appearance of full bricks. Once the installation has been pointed with mortar, it can be very difficult to distinguish a brick slip façade from traditional brickwork.

The choice of brick slip, bond pattern and mortar colour can all have a significant impact on the finished appearance.
Are exterior brick slips durable?

Kiln fired clay brick slips will weather and age in the same way as full bricks.
How long will brick slip cladding last for?

A properly specified and installed brick slip cladding system is designed to provide a durable external finish and should last in excess of 25 years.

As with any façade system, long-term performance depends on using appropriate materials and following the correct installation methodology. The specification needs to take account of factors such as the building construction, height, location and exposure to wind-driven rain.

Correct detailing around openings, corners, interfaces and expansion joints is also important to the performance of the completed façade.
Choosing the right exterior brick slip system

At Eurobrick, we offer a range of systems designed for different types of construction and performance requirements. Factors including the building substrate, height, insulation requirements, exposure and fire performance will influence which system is most appropriate.

With more than 35 years’ experience in brick slip cladding, our technical team can provide advice at an early stage of your project, helping with system selection, detailing, quantities and installation requirements.

Take a look at our brick slip cladding systems to explore the different options available.
Exterior brick slip inspiration

Eurobrick systems have been used on exterior projects ranging from individual homes and extensions to schools, supermarkets, restaurants, residential developments and large commercial buildings.

Our Case Studies include examples of brick slip cladding across new-build, refurbishment, timber frame, modular and other modern construction projects.
Still have a question?

If you are considering brick slip cladding for an exterior project and have a question that we have not answered here, our technical team is happy to help.

We can advise on the most suitable system for your building, brick and stone slip options and technical considerations.

Call us on 0117 971 7117 or email info@eurobrick.co.uk for more information.

Eurobrick's Bespoke solutions for greater design flexibility

October 2026

Brick slip cladding offers considerable design flexibility, with a wide choice of brick finishes available to suit different architectural styles and applications. But what happens when a project calls for something outside the standard ranges?

From matching existing brickwork to creating arches, sills, plinth and other architectural details, bespoke and cut-to-order products can help architects, designers and contractors achieve a more individual finish while retaining the benefits of a brick slip system.

At Eurobrick, we work with a number of specialist manufacturing partners in the UK and Europe, enabling us to source and supply a wide variety of non-standard brick and stone slips and bespoke components. Our technical team can also help customers explore their requirements, develop ideas and identify suitable products for individual projects.
Corner slip cut from whole brickBrick and stone slips cut to order

For projects where it is important to match existing brickwork as closely as possible to create a consistent finish, we can help source a suitable brick, arrange for it to be cut into slips and coordinate delivery to site.

Natural and manufactured stone can also be cut to order, giving designers access to a variety of colours, textures and finishes, with slips produced in the sizes required for the project.

Specially cut slips can also be used to recreate particular brick bonds. Flemish and English bond, for example, incorporate header bricks. Specially cutting header slips helps retain the appearance and character of the original brick, which can be particularly important when working with stock bricks.
Adding architectural detail

Window heads, sills, plinths and other details all contribute to the overall character of a building. We can source and supply bespoke products to help incorporate these features into a brick slip façade.

Pre-formed brick slip arches can be manufactured off site to suit the project and delivered ready for installation, helping to simplify more complex detailing on site. Options include flat gauge, segmental and semi-circular arches.

Special-shaped bricks, including plinth bricks, can also be adapted for integration with our cladding systems, allowing traditional brick details to be incorporated into contemporary construction.
Green glazed bricks Creating something different

Bespoke products provide opportunities to introduce more distinctive elements to a façade.

Glazed brick slips are available in a range of colours and can be used to introduce colour, pattern or contrast. We can help source suitable glazed products and arrange supply to meet individual project requirements.

Engraved brick and stone slips offer another way to create a unique detail. Text or graphics can be engraved onto an individual slip or extended across several slips to create a larger or more complex design.

For applications where a brick finish needs to continue onto the floor, engineering-style brick slips suitable for internal and external flooring can also be supplied in a selection of colours and sizes.
Bespoke solutions in practice

We have supplied bespoke products and specially manufactured details for many projects, helping customers achieve their design requirements.

At Parkside, Imperial War Museum, specially cut brick slips were used alongside bespoke soffit and sill details, helping to achieve the architectural requirements of the development while integrating with the brick slip cladding system.

At McDonald’s Buxton, we supplied a combination of stone finishes along with bespoke architectural detail pieces including a large cast surround for the main entrance. This project demonstrates how standard cladding areas and individual feature elements can be brought together as part of an overall façade design.

At the Nox Hotel, flat gauge arches were supplied to create the window head details, adding a traditional architectural feature to the brick slip finish.

Technical support from start to finish

Bespoke components inevitably require more planning than selecting products from a standard range. Early discussion can help establish what is achievable and identify the most appropriate way to create a particular detail.

With more than 35 years’ experience in brick slip cladding, our technical team can work with customers to explore their requirements, source suitable products and help develop practical solutions for individual projects.

Whether the requirement is to match an existing building, recreate traditional brickwork details or introduce something completely individual, our combination of technical expertise, established supplier relationships and customer support can help turn an idea into a practical brick slip solution.
Looking for something outside our standard range?

Visit our bespoke products page to explore the options available or contact our technical team to discuss your project requirements – call 0117 971 7117 or email info@eurobrick.co.uk. We can help you explore brick and stone options, bespoke components and cut-to-order products to find the right solution for your design.

List all press releases