ROOF EDGE FABRICATIONS LTD
UNIT 1 INVERGYLE COURT
LANARKSHIRE G51 2JR
Tel: 0141 949 1014
Fax: 0141 949 0998
Suppliers of: Rooftop Guardrails, Roof Fall Arrest Systems, Roof Edge Protection Systems, Rooftop Safety Wire Systems
Roof Edge Fabrications designs, supplies, installs and recertifies a wide range of roof safety products and systems. Part of the Kee Safety Group, a leading worldwide supplier of fall protection solutions and safety railing systems.
Our range of products provide solutions to ensure that work at height can be carried out safely and securely. Protection systems such as rooftop guardrails provide permanent edge protection while our slope mounted roof anchors, life lines and anchors provide personal fall arrest or restraint protection, depending on the application.
Slope Mounted Roof Anchors
The Roof Edge Fabrications range of Slope Roof Mounted Anchors provide an easy to install, cost effective solution for pitched roof safety. The range features the standard roof mounted anchor, a top fix system for when aesthetics are a concern and an adjustable ridge anchor for varying beam sizes. Our range is fully tested to EN795.
We offer a wide range of Rooftop Guardrails to include Modular Free Standing Systems, portable Roof Edge Protection and Collective Edge protection for Metal Roofs. These systems are ideally suited to comply to all Rooftop guardrail certification.
Lifelines and Anchors
The Keyline Lifeline System is an engineered wire based fall protection system ideal for areas where guardrails are not suitable. The Kee i-bolt® range of safety anchors are Class A1 safety anchors designed to provide fall protection when carrying out external work such as window cleaning or building maintenance from inside the building. The Mobile Man Anchor is the ideal solution for when temporary protection is required for short term work such as maintenance of roofs where edge protection has not been installed.
Safe Access Solutions
We offer a wide range of Products to include:
- Freestanding Exterior & Interior Demarcation Products
- Rooftop Walkway Protection
- Lightwieght Aluminium Walkways
- Rolling Platforms and Mobile Safety Cages for Fragile Roofs
- Vertical Fall Protection
- Ladder safety Products
- Safety Gates
- Rooflight Protection
Ground Based Guardrails
As well as Rooftop Safety, we also supply a range of DDA Compliant Handrails, Guardrails and Barriers constructed using Kee Klamps Tubular fittings allowing versatile design to meet any requirements.
Roof Edge Fabrications is able to fabricate a range of bespoke ladders, gantries, railings and structured steel work when off the shelf solutions are not suitable or possible.
Further Technical information is available to download from the BPi Download Library or from our website.
These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. Please check with the supplier before specifying or purchasing products.
Roof Edge Fabrications Cabloc
vertical fall arrest protection
Published [14/02/17]File size [4999 KB]
Roof Edge Fabrications DDA Handrail Guide
Published [14/02/17]File size [455 KB]
Roof Edge Fabrications Guardrails KeeGuard Ladder Kit
Published [14/02/17]File size [2525 KB]
Roof Edge Fabrications Kee Access
Roof Edge Safety Components
Published [14/02/17]File size [295 KB]
Roof Edge Fabrications Kee Dome OM
guardrail for rooflights
Published [14/02/17]File size [2758 KB]
Roof Edge Fabrications Kee Gate Pallet Gate Operational Brochure
Published [14/02/17]File size [2069 KB]
Roof Edge Fabrications Kee Gate Safety Gate Solutions
kee gate safety gate
Published [12/12/18]File size [421 KB]
Roof Edge Fabrications Kee Gate Self Closing Gate OM
Published [14/02/17]File size [967 KB]
Roof Edge Fabrications Kee iBolt Anchor Devices
Published [14/02/17]File size [1019 KB]
Roof Edge Fabrications KeeGuard Edge Protection OM
Published [07/12/18]File size [1582 KB]
Roof Edge Fabrications KeeGuard Foldshield OM
Roof Edge Fabrications Guardrails
Published [14/02/17]File size [1591 KB]
Roof Edge Fabrications KeeGuard Ladder Kit
Published [14/02/17]File size [2525 KB]
Roof Edge Fabrications KeeGuard Premium OM
Published [14/02/17]File size [2128 KB]
Roof Edge Fabrications KeeGuard Topfix 2016
Published [14/02/17]File size [1405 KB]
Roof Edge Fabrications KeeLine Engineered Life Lines
Published [14/02/17]File size [651 KB]
Roof Edge Fabrications KeeLine OM Brochure
Published [14/02/17]File size [1940 KB]
Roof Edge Fabrications Keeline Overhead
Safety Solution for Overhead Life Lines
Published [12/12/18]File size [857 KB]
Roof Edge Fabrications Railok
rigid vertical safety system
Published [14/02/17]File size [2614 KB]
Roof Edge Fabrications Self Closing Safety Gates, Pallet Gates
Published [14/02/17]File size [602 KB]
Roof Edge Fabrications Slope Mounted Roof Anchors
Slope Mounted Roof Anchors
Published [12/12/18]File size [838 KB]
Roof Edge Fabrications Valley Walk
Published [14/02/17]File size [1928 KB]
Roof Edge Fabrications Weightanka
Published [14/02/17]File size [1275 KB]
Health and Safety Executive report shows fatal falls increase
The Health and Safety Executive has released a statistics report which highlights a worrying increase in deaths caused by work at height.
Forty workers were the victim of a fatal injury from a fall from height between 2018 and 2019, making it the leading cause of workplace deaths. Between 2017/2018, 35 workers died due to a fall from height.
Across all sectors 147 workers were killed at work in 2018/2019, an increase of 6 fatalities from 2017/2018.
These statistics follow an advisory report from the All Party Parliamentary Group on Working at Height, created by a group of non-partisan MPs with the help of various work at height industry leaders, which advised the introduction of enhanced reporting, the appointment of an independent body, and an equivalent system to Scotland’s Fatal Accident Inquiry process throughout the UK.
‘Time is of the essence’
Chair of the APPG and MP for Glasgow Central Alison Thewliss said: “these statistics show this issue is not going away. It is imperative that the Government takes forward the recommendations made in our report which have been devised with input from industry and key stakeholders”.
“Time is of the essence when it comes to safety in the workplace, and we need to ensure these actions are taken forward as quickly as possible”
Speaking on behalf of the Access Industry Forum, PASMA’s Managing Director, Peter Bennett OBE said: “whilst we welcome the UK continues to consistently have one of the lowest rates of fatal injury across the EU, the figures released today are still too high. There should be absolutely no question or doubt over workers’ ability to return home safely to their families every evening.”
The report does show a decrease in total fatalities in the construction industry in particular, with 30 fatal injuries, down on the average of 36 and the lowest since 1981, when records began. Unfortunately construction remains the second highest sector for number of deaths, behind agriculture, forestry and fishing.
HSE Chair Martin Temple said: “This release of workplace fatality statistics is a reminder that despite the UK’s world leading position in health and safety, we cannot become complacent as we seek to fulfil our mission in preventing injury, ill health and death at work.”
A leading cause of fatalities when working at height is falls through fragile roofs. At Roof Edge, we offer a range of fragile roof products when carrying out work on dangerous roofs, including temporary walkways and solutions for valley gutters. For more information about our height safety products, call us on 0141 949 1014, or use our online contact form.
NEW FULL HEIGHT SPRING LOADED SAFETY GATES
Our new full height spring loaded safety gates have been designed to protect people accessing roofs from ladders or other openings including stairs and roof hatches and restricted areas where regular access is required for maintenance and inspection purposes.
The full height gates feature the same design quality as our standard Kee Gate self-closing safety gates such as a spring loaded mechanism to ensure the gates close behind the user and have undergone the same stringent durability tests for assured performance. An additional benefit is that the gates have been designed to comply with BS 4211: Specification for Permanently Fixed Ladders, making them the perfect solution for safe access onto a roof from a ladder.
As with all gates in the Kee Gate range, the full height gates can be easily retro-fitted to an existing structure. Gates are 1.1m high and can be adjusted on site to accommodate openings of up to 1m wide.
Safety Gates for Ladders
Safety Gates for Ladders
Features and Benefits
Comply with EN 4211 and EN 1422
Reversible hinges for either left or right hand side of an opening
Easily retro-fitted to existing structures
Performance and durability tested for trouble-free operation
Spring loaded mechanism for automatic opening and closing
Further information on our Full Height Safety Gates can be found on our Spring Loaded Safety Gate product page