AIRFLOW DEVELOPMENTS LTD - COMMERCIAL VENTILATION
CRESSEX BUSINESS PARK
BUCKINGHAMSHIRE HP12 3QP
Tel: 01494 525252
Fax: 01494 461073
Suppliers of: Heat Recovery Ventilation, Heat Exchangers, Air Handling Units, Commercial Ventilation & Fans ventilation for schools commercial heat recovery commercial fans, commercial heat exchangers, commercial air handling units school ventilation
Airflow design and manufacture a wide range of centrifugal fans and blowers for cooling, ventilating, moving hot gasses and warm air.
Applications vary from ducted ventilation to sophisticated electronics cooling and the safe dilution of boiler flue gasses. With over 60 years of expertise in air movement we have a solution for both OEM and end user installations.
Broadly speaking our fans and blowers can be categorised into Industrial products for OEM applications and Flue Dilution fans for diluting CO2 emissions.
- BIM Compliance: BIM Files are available here
- Social Media links: Facebook / Twitter / Pinterest / Instagram / Linkedin
- CPD Available: Click here
- Product Selection Software available: Click here
Airflow Commercial and Industrial Ventilation products include:
Commercial Fans: A range of commercial fans suitable for light to heavy commercial ventilations
- Aventa In-Line Fans for smaller size commercial ventilation solutions. Airflows up to 405m3/h
- Aventa inline turbo fans for large size commercial ventilation solutions. Airflows up to 1340m3/h
- Aventa inline silent fans for commercial ventilation solutions where noise is a problem. Airflows up to 1020m3/h
Industrial Fans: Industrial centrifugal fans and blowers
- Single Inlet Fan Range developing excellent air flow/ pressure for size. Airflows up to 426.6m3/h
- Duplex Blower Fans twin centrifugal fans discharging across a broad front.Up to 544 m3/hr
- Double Inlet Fan Range particularily quiet centrifugal fans. Airflows up to 846 m3/hr
Flue Dilution Fans Range full range of ErP 2013/2015 compliant Flue Dilution fans from 80 to 650Kw boiler input rating
Commercial Heat Recovery: Duplexvent Commercial and Industrial Heat Recovery units
- Flexi Range Passive House certified MVHR units which are designed with high performance and quality
- Multi Range These indoor units are used for comfort ventilation, air heating and cooling.
Multi-N Range These outdoor units are used for comfort ventilation, air heating and cooling.
Airflow Instruments: A range of intruments and monitors for commercial & Industrial Applications
- LOG32 Data Logger Temperature, humidity and dew point data logger. Designed for diagnostic analysis of environmental conditions.
- Air Flow Measurement Anemometer and Aircone kit for balancing ventilation systems
Wall Mounted Monitors A range of wall mounted air quality monitors
Hand Dryers: A range of eco-friendly hand dryers. ecoDRY range are very efficient and exceptionally hygenic.
- ecoDRY Range Compact and efficent hand dryers
Further technical information is available to download from the BPi Download Library.
These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. Please check with the supplier before specifying or purchasing products.
1. Airflow Commercial Ventilation with Heat Recovery
Airflow Commercial Ventilation with Heat Recovery
Published [12/07/19]File size [9057 KB]
2. Airflow Solutions Accessories
Ducting, grilles, controllers and much more
Published [12/07/19]File size [7625 KB]
3. Airflow Industrial Fans
Blowers, hot air fans, dilution, OEM fans
Published [12/07/19]File size [3249 KB]
4. Airflow Hand Dryers
Quiet, hygienic and hands free dryers
Published [12/07/19]File size [1341 KB]
5. Airflow Instruments
Airflow and velocity measurement
Published [12/07/19]File size [922 KB]
6. Airflow Ventilation Guide
Airflow Ventilation Solutions, Quiet, energy efficient ventilation, air flow solutions
Published [12/07/19]File size [13247 KB]
7. Airflow Commercial Fans
commercial fans, fans
Published [12/07/19]File size [2171 KB]
Airflow Commercial MVHR Technical Brochure
MECHANICAL VENTILATION WITH HEAT RECOVERY
Published [12/07/19]File size [11481 KB]
Airflow Iconstant Consumer Brochure
fans and airflow measurement devices
Published [12/07/19]File size [1880 KB]
Airflow Industrial Fans DL
INDUSTRIAL CENTRIFUGAL FANS
Published [12/07/19]File size [486 KB]
Airflow Susurro Detailed Product Specification
Mechanical Ventilation with Heat Recovery, decentralised ceiling mounted single room units
Published [12/07/19]File size [4015 KB]
Flue Gas Dilution fans – your alternative to a chimney
Flue Gas Dilution fans – your alternative to a chimney
Flue Gas Dilution fans are the ideal replacement for a commercial gas boiler flue stack. As part of the boiler discharge system they are able to dilute the products of combustion created by gas boilers down to the required safe concentration level of 1% Carbon Dioxide or less, making costly, high level chimney flues obsolete.
What are Flue Dilution fans?
A flue dilution fan is a powerful centrifugal fan which dilutes the waste gas emissions created by commercial gas boilers. They do this by introducing fresh air into the boiler discharge and dilute the CO2 content down to equal or less than 1% concentration, as required for discharging the diluted air outdoors at low level by IGEM regulations. Flue dilution fans are suitable for both atmospheric and condensing type commercial boilers. However, due to the condensation created by condensing commercial boilers, a corrosion resistant fan, such as Airflow’s stainless steel SSDF range, is recommended. Unlike a flued chimney, which would typically need to be many metres tall and in certain areas require planning permission, flue dilution fans only need two metres of ducting from the fan to the outlet to complete a flue dilution system. If LPG or Butane is being used then the air flow rates are increased so to dilute the gases down to the minimum 1% legal level. High quality flue dilution fans come with a differential pressure switch. This acts as a failsafe device as the switch activates in the event of a flue blockage or fan failure and switches off the boiler and gas supply to prevent gas build-up or damage to the system or boiler.
Why would you use a Flue Dilution fan?
You would typically use a flue dilution fan system when it is not possible to build a flue chimney on site due to budget constraints, planning requirements or lack of space. A flue dilution fan enables construction costs for a site to be minimised and for the conspicuousness of the building to be reduced due to the system’s non-intrusive appearance and compact design.
Flue Dilution fan range
Airflow’s range of flue dilution fans is available in five sizes to meet the dilution needs of large domestic, industrial and commercial boilers rated from 80kW up to 650kW input. Each size is available in a standard version (GBDF) and in an enhanced corrosion resistance stainless steel version (SSDF), which extracts up to 1750 l/sec with a system pressure of up to 375 Pa. The GBDF and the SSDF ranges have a maximum ambient temperature of 40°C. Airflow’s GBDF flue gas dilution fans are recommended to be used with atmospheric boilers and waters heaters with an efficiency rating of approximately 75%. This is due to the boiler creating less aggressive condensation which would otherwise corrode and damage the fan. The SSDF fans, thanks to their stainless steel fan cases, have enhanced corrosion resistance and are designed for systems where regulations or the specification calls for stainless steel ducting. This is needed with higher efficiency boilers, as they are likely to produce aggressive condensation which would otherwise corrode and damage the unit. Airflow’s SSDF range, thanks to its stainless steel casing, is also ideal when more corrosive gases need extracting. When designing and installing a flue dilution system using either Airflow’s GBDF or SSDF fan, it is important that attention is paid to the latest editions of the relevant standards and guides. All of Airflow’s flue dilution fans are compliant to the criteria outlined by the Institute of Gas Engineers and Managers regulation IGEM/UP/10 Edition 4 with amendments –March 2016 and February 2017.They are also compliant with Eco design ErP 2015 Regulations
SUSURRO MAKES IMPROVING INDOOR AIR QUALITY A BREEZE
The new Susurro, a ceiling mounted heat recovery unit from Airflow Developments, has been designed to provide continuous decentralised ventilation for both office and educational environments. Featuring a new generation of efficient, energy saving and ultra-quiet technologies, architects can be assured that the units meet all the necessary regulations, and provide a fresh and healthy indoor air quality for the occupants.
A multitude of key features makes Susurro a high performance ventilation option for new and existing offices and school buildings. With an aluminium cross counter flow heat exchanger, the unit recovers up to 90% of otherwise wasted heat. In accordance with the ErP Ecodesign Directive, Susurro features a 100% summer bypass facility to prevent heat recovery from taking place in hot weather – reducing the risk of overheating.
It's unique capillary tube system at the air outlet ensures that fresh air is supplied into the room near the ceiling. This supply air then mixes with the ambient air, before slowly descending into the room, avoiding any uncomfortable draughts for building occupants.
Susurro is the ideal option for office and educational environments, helping to improve air quality and with a virtually inaudible noise level of just 35 dB(A) at nominal air flow, the units can contribute positively to an environment that aids concentration and productivity. All Susurro units comply to both BB101 and BB93 guidelines for educational premises.
John Kelly, Marketing Manager at Airflow Developments said: “Our new Susurro heat recovery unit is a testament to our knowledge and capability within the complex field of ventilation. It delivers precisely what is needed: a highly efficient, low energy, low noise heat recovery unit that can make a positive difference to the wellbeing of office workers and students alike.”
No air ducts are required and units are suitable for offices, boardrooms and educational facilities. For existing buildings, there is no need to design a detailed ventilation system, as it is simply mounted on the wall. With a digital touch screen controller and offering automated control to optimise performance – Susurro maximises energy efficiency and minimises heat losses with minimal input from the building manager.
Susurro is available with a three-year warranty, and energy efficient EC motors. The unit is available in two ranges: standard and design. With air flow rates of 400, 700 and 1000 m3/h, units will provide an ambient temperature range of +5°C up to 40°C.
For further information visit: https://www.airflow.com/pdf/Susurro/susurro-detailed-product-specification.pdf