When site conditions call for raft construction, builders often face a conflict between structural, waterproofing, and acoustic design requirements. The challenge intensifies when a timber separating wall is part of the construction.
According to Robust Details E-WT-2 TM (October 2011, detail 7), one traditional approach involves forming a channel cast into the raft to act as a water diversion path. This “emergency canal” is designed to contain or redirect water if leakage occurs in the accommodation on one side of the separating wall, theoretically preventing the spread of water to the adjoining dwelling.
However, in practice, this approach presents several significant issues.
The Limitations of Raft Channel Construction
Forming a channel into the raft introduces cost, complexity, and uncertainty. Its ability to handle significant water volumes is limited, and the discharge route is often unclear.
In theory, the channel allows water to flow into the perimeter wall cavity. But when contaminated land barriers are required such as protection against radon, methane, or carbon dioxide, these barriers typically seal the cavity, blocking the water’s exit path.
The result? Water becomes trapped with no practical way to drain, increasing the risk of saturation and long-term damage.
Furthermore, in order for water to reach this central channel, it must first pass through the separating wall construction. This often means saturating timber framework and insulation materials not designed to withstand partial or prolonged submersion.
An Advanced Alternative: Upward-Rising Party Wall Barriers
At Cavity Trays, innovative party wall and separating wall barrier systems have been developed to overcome these problems.
Instead of channelling water downward into the raft, these systems create a mid-wall water arrestment barrier that rises vertically. By rising upward rather than descending, the barrier can contain greater water volumes and prevent ingress into the wall assembly itself.
Crucially, this upward-rising configuration also allows the barrier to over-sail contaminated land gas membranes that project into the perimeter wall cavity. The design therefore avoids the compatibility conflicts that typically occur between waterproofing and gas protection requirements.
The Type PWRB: Dual Upstand Party Wall Rising Barrier
The latest evolution in this technology is the Type PWRB (Party Wall Rising Barrier) a new design from Cavity Trays Ltd that refines the concept even further.
This next-generation system features two vertical upstands positioned against the plasterboard faces on both sides of the separating wall. In the event of internal flooding, these upstands act as miniature dams, preventing water from penetrating the wall assembly at all.
Because the acoustic flanking strip (minimum 5mm) can still be installed directly against the barrier surface, the acoustic performance of the separating wall remains unaffected.
Additionally, since the Party Wall Rising Barrier is manufactured from solid DPC-grade material, the use of a separate damp-proof course beneath the timber frame sole plates can be eliminated. This single integrated solution therefore serves multiple functional purposes; water arrestment, damp-proofing, and acoustic compatibility.
Benefits of the Type PWRB
No need for raft-formed channels, reducing site complexity and cost.
Improved flood resistance through dual upstand water containment.
Maintains acoustic integrity with flanking strip compatibility.
Eliminates redundant DPC layers, streamlining installation.
Compatible with gas barrier membranes, ensuring full system integration.
Quick and cost-effective to install on-site.
The Type PWRB from Cavity Trays represents a proven and practical solution to a long-standing construction dilemma how to unify waterproofing, gas protection, and acoustic performance within raft foundation builds.
Integrating Performance and Protection
By replacing the traditional raft channel with an upward-rising, dual-upstand barrier, Cavity Trays provides a smarter and more resilient way to protect separating walls in raft construction.
In the event of internal ground floor flooding, the barrier prevents water from reaching the separating wall in the first place, minimising damage and preserving the integrity of the structure.
For detailed technical guidance, refer to Cavity Trays Resources or contact our technical team for advice on party wall rising barriers and raft construction waterproofing solutions.
Get in touch with Cavity Trays today
Call our team on 01935 474769 or email enquiries@cavitytrays.co.uk