
When adding a flat roof extension to an existing property, proper flat roof ventilation is essential to prevent condensation, moisture build-up, and structural damage. Building Regulations require ventilation at the roof/wall intersection where the extension joins the original building, with corresponding ventilation on the outer edge.
The Challenge of Venting a Flat Roof Extension
When venting a flat roof, especially on an existing property, the attachment point between the new roof and the existing wall can be a weak spot for both airflow and damp protection. Many builders also face the challenge of installing roof vents on an existing roof in the UK without compromising weatherproofing or insulation.
How to Ventilate a Flat Roof Extension Where It Joins an Existing Building
The Type RAV-FL Roof Abutment Ventilator from Cavity Trays of Yeovil offers a high-performance solution, delivering an airflow rating of 25,000mm² per running metre. This ensures compliance with ventilation regulations while maintaining compatibility with damp protection measures.
Here’s how it works:
A timber upstand is fixed to the existing wall using vertical stand-off battens, maintaining a clear airflow path around the decking edge.
2. The RAV-FL ventilator is opened like a book and secured via its pre-drilled holes to the top of the timber upstand.
3. The ventilator is closed against the masonry and fixed in place, ready to be overdressed with protective flashing from the cavitray during construction.
This approach ensures consistent airflow and helps ventilate a flat roof without compromising the integrity of the building envelope.
Opposite-Side Ventilation Options
To ensure proper cross ventilation, the opposite edge of the extension can be vented using soffit vents, fascia vents, or hidden airflow paths – all available from Cavity Trays. See our ranges here.
Get in touch with Cavity Trays today
Call our team on 01935 474769 or email enquiries@cavitytrays.co.uk