MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS

UNIT 3 BORAN COURT
NETWORK 65 BUSINESS PARK
BURNLEY
LANCASHIRE BB11 5TH

Tel: 01282 473 100
Fax: info@mapei.co.uk

Company Logo

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Adesilex P10 - Tile adhesive
A white cement-based powder adhesive.White in colour, it enhances the colours of glass mosaic tiles, a creamy paste which is easily workable, excellent adhesion to all conventional materials used in building, highly thixotropic: Adesilex P10 can be applied on a vertical surface without slumping or slipping even when heavy tiles are used. Mosaic tiles can be installed from the top towards the bottom without using spacer pegs. particularly extended open and adjustability time, making installation easier.Adesilex P10 is classified C2TE to prEN 12004.Adesilex P10 can be further improved with the addition of Isolastic diluted at a ratio of 1:1 with clean water, changing its classification to C2E S1 to prEN 12004. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Adesilex P9 - Tile adhesive
Cement based adhesive with good initial adhesion strength and no vertical slip for ceramic tiles.Easily workable, Highly thixotropic, water and frost resistant, excellent resistance to alkali, oils and solvents. Classification C2TE. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Aquaflex Roof
Ready-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces. Acrylic-based waterproof coatings

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Carboplate - Pultruded Carbon Fibre Plates
Pultruded carbon fibre plates pre-impregnated in epoxy-based resin, protected by a double film of plastic. Fibre-reinforced polymer plates

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Colorite Performance
Protective acrylic paint for internal and external application - high UV resistance available in a wide range of colours. Resin-based breathable masonry paints

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Dursilite - Interior Wall Paint
Dursilite is a modified acryl resin-based washable matt paint in water dispersion with selected charges with good covering properties and a high whiteness level for internal walls. When applied on internal surfaces, Dursilite bonds perfectly to all types of masonry, render, smoothing and levelling compounds and old paintwork, as long as it is well attached and is not crumbling.Features and benefits:Dursilite protects the substrate and gives it a highly attractive, uniform matt finish which is velvety to the touch.The product is available in a wide range of colours, created using the ColorMap® automatic colouring system. Resin-based breathable masonry paints

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Elastobond
High performance roofing waterproofing membrane based on a modified bituminous compound constructed from distilled bitumen and highly resilient elastomeric (thermoelastic) resin.It is reinforced with a non-woven 'spunbond' polyester fabric that guarantees excellent mechanical performances with high puncturing resistance, good tensile strength and multidirectional elongation. The SBS elastomeric compound gives the material outstanding performance at the lowest temperatures.The underside of Elastobond S6 and Elastobond S6 Mineral is protected by Polyflam, a special polyethylene film which melts upon torching. In the mineral version, the top surface is protected by a uniform layer of slate chippings and has a longitudinal selvedge for overlapping making application fast and secure. Reinforced bitumen roofing sheets

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Elastocolor Paint
A ready-to-use fixative, based on synthetic resins in solvent.Features and benefits:It easily penetrates into porous substrates and ensures excellent insulation and good adherence to the paint that will be applied.Elastocolor Primer satisfies UNI 8657 and UNI 8658 concerning anti-evaporation products. Universal primers

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Elastorapid - Tile adhesive
A two component, quick setting, highly deformable, high performance non-slip cement-based adhesive with extended open time for ceramic tiles and natural stone.Elastorapid may be applied to vertical surfaces without slumping. It has high bonding strength after only 2–3 hours; floor and wall surfaces can be put into service very quickly.Elastorapid is a cementitious (C) improved (2) fast setting (F) tile adhesive with reduced slip (T), extended open time (E) and highly deformable (S2) characteristics, classified as C2FTE-S2 in accordance with EN12002.Do not use Elastorapid on metallic, rubber, PVC or linoleum surfaces. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Evolight - Roofing membrane
A range of high performance polyester based torch-on membranes manufactured using Reoxthene, a revolutionary patented technology. Reoxthene membranes offer increased bond strength despite requiring less heat activation than conventional membranes, resulting in easier and quicker installation. The underside of Evolight and Mineral Evolight is protected by Polyflam, a special polyethylene film which melts upon torching. In the mineral version, the top surface is protected by a uniform layer of slate chippings and has a lateral selvedge for overlapping making application fast and secure.Evolight torch-on membranes provide high performance and reliable flat roof waterproofing, combining the qualities of exceptional performance with excellent handling characteristics. The membranes exhibit excellent dimensional and mechanical stability making them suitable as part of a built-up system, or as a refurbishment overlay to existing asphalt or selected surface bitumen membranes.Features and benefits:Reduced weight (up to 40% compared to conventional products).Reduced heat activation.Increased bond strength.Low temperature flexibility.Easy to handle and apply.15 year product warranty available. Reinforced bitumen roofing sheets

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Foamshield Insulation
A range of polyisocyanurate insulation boards for use in warm flat roof construction. They are CFC and HCFC free and available in a variety of standard thicknesses. Polyisocyanurate (PIR) foam boards

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Granirapid - Tile adhesive
A two-part adhesive with rapid setting and hydration, low shrinkage and excellent resistance to alkali, oils and solvents.Granirapid is classified C2F S1 to prEN 12004. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Isolastic - Tile adhesive additive
Latex additive mixed into Kerabond T and Adesilex P10, either as is or diluted 1:1 with water, in order to meet the requirements defined in BS EN 12004. When mixed with cement based adhesives, it improves adhesion to all substrates, deformability and impermeability, once hydration has taken place.Features and benefits:Offers excellent resistance to alkali, oils and solvents. Polymer admixtures

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Keracolor SF - Tile grout
Keracolor SF is a class CG2WA improved cementitious mortar.Features and benefits:Includes 5 kg unit.Available in seven colours.It is made up of a blend of cement, fine-grained inert materials, synthetic resins, special admixtures and pigments.Good compressive and flexural strength and good resistance to freeze/ thaw cycles and therefore optimum durability.Smooth, compact finished surface with a very fine grain structure, with low water absorbency and therefore easy cleaning.Very good resistance to abrasion.Low shrinkage rate, therefore free of cracks and crevices.Good resistance to acids with pH >3.By mixing Keracolor SF with Fugolastic, a special synthetic resin-based polymeric admixture, its final characteristics are further improved and it reaches a level of strength which makes it suitable for even the most severe in-service conditions (grouting facades, swimming pools, bathrooms and even floors subject to intense traffic). Keracolor SF together with Fugolastic admix may also be used for grouting joints in marble to be polished after laying. Cementitious and reaction resin grouts

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Keraflex - Tile adhesive
Keraflex is an improved (2) slip resistant (T) cementitious adhesive (C) with extended open time (E) classified as C2TE. Composed of cement and fine graded sands, it contains high levels of synthetic resins and special additives.Easily workable, Highly thixotropic; Keraflex can be applied on a vertical surfaces without slump or tile slip, even with heavy tiles.Perfect adhesion to all materials normally, used in buildings. Hardens with minimal controlled shrinkage. Extended open time. Water and frost resistant. Excellent bond strength.This CE marked product offer excellent resistance to alkalis, oils and solvents. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Keraflex Maxi S1
High performance, deformable cementitious adhesive (flexible S1 in compliance with BS EN 12002) with extended open time and no vertical slip, for ceramic tiles. Especially suitable for the installation of large-size porcelain tiles and natural stone.Keraflex Maxi is a cementitious (C) improved (2) tile adhesive with reduced slip (T), extended open time (E) and deformable (S1) characteristics, classified as C2TE S1.Composed of cement and fine graded sands, it contains high levels of synthetic resins and special additives.This CE marked product offers excellent resistance to alkalis, oils and solvents. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Keralastic - Tile adhesive
A two-part flexible and waterproof polyurethane adhesive designed for fixing ceramic floor and wall tiles, natural and artificial stone and mosaics in interior and exterior situations.Keralastic is classified R2 to prEN 12004.Good workability, excellent durability and resistant to ageing, perfect adhesion to all surfaces used in building, hardens by chemical reaction without shrinkage. Polyurethane (PUR) adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Kerapoxy CQ - Tile grout
Easy to apply, two-component, acid resistant epoxy resin-based mortar with silica sand and other special components which offers excellent cleanability and very low emission of volatile organic compounds, for grouting joints of a minimum width of 1 mm.Features and benefits:The product offers excellent resistance to humidity, ageing, acids, alkalis and very good resistance to solvents and oil.Available in 17 colours, consult technical literature for exact details.Particularly suited to the grouting of heavily textured tiles, due to the colour quartz element of the product.New packaging. Flow applied flooring

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Kerapoxy Easy Design
For decorative grouting of internal and external tiled floors and walls, in particular glass mosaic. Also suitable for an acid resistant bond to all substrates normally used in the building industry. Kerapoxy Design allows the creation of floors, walls and worktops in compliance with the HACCP system and the requirements of EC Regulation 852/2004 regarding hygiene and foodstuffs.Features and benefits:Kerapoxy Easy Design may be mixed with up to 6% by weight of MapeGlitter, metallized coloured glitter, to create aesthetic effects. Percentage depends on the aesthetic effect and workability desired. MapeGlitter is available in silver and gold.Kerapoxy Easy Design may be mixed with Mapecolor Metallic, available in pre-dosed sachets (90 g, equal to 3% by weight of a 3 kg drum of Kerapoxy Easy Design), powder pigment based on veery high-quality pearlescent mica, to create a metallic effect. Mapecolor Metallic is available in Moonlight (similar to platinum), Sahara (similar to gold), Shining (similar to silver), Red clay (similar to copper), Stardust (similar to dark silver). In order to obtain a homogeneous mix, the manufacturer suggests to add Mapecolor Metallic of the desired colour to Kerapoxy Easy Design 700 (translucent). Epoxy resin grouts

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Keraquick S1 - Tile adhesive
A rapid-setting, cement-based powder adhesive with medium deformability.Keraquick S1 is a cementitious (C), fast setting (F) tile adhesive that has reduced slip(T) and deformable (S1) characteristics , classified as C2FT S1 to prEN 12004.Latex Plus can be added to increase deformability of the adhesive, changing its classification to C2FT S2. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Keraquick XL Fibrelite - Tile adhesive
Fibre-reinforced, high yield, cement-based, rapid setting adhesive for interior and exterior use when installing porcelain, ceramic and natural stone materials. Suitable for fixing tiles up to 1500 x 1500 mm. Includes 15 kg unit. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Latex Plus - Tile adhesive additive
Latex Plus is a water dispersion of an extremely flexible polymer with low viscosity to be mixed with Planipatch Xtra and Keraquick S1,h in order to improve their deformability, improving their application and performance characteristics. Polymer admixtures

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Latexplan No Ammonia - Levelling Compound
A two-part, fast-setting, cement-based compound suitable for levelling differences in thickness between 3 mm to 10 mm on new and existing substrates. Smoothing and levelling underlay compounds

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Latexplan Trade
Two part smoothing/ levelling compound to level differences in thickness of 1 to 10 mm. The product consists of grey powder (part A) containing special cements, graded silica sands and additives to be mixed with a synthetic rubber latex (part B). Smoothing and levelling underlay compounds

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Latexplan Trade Fast
Two-part, cement based, rapid curing compound. Used for levelling and smoothing the differences in thicknesses of 3–10 mm (in one application), where rapid installation of all types of floor coverings is required on new and existing substrates.Features and benefits:Moisture tolerable.Low odour; product can be used in confined and inhabited areas.Not flammable.Suitable for use under Mapei damp proofing membranes – consult manufacturer for information.Part A conforms with the conditions of Annex XVII to Regulation (EC) No 1907/2006 (REACH) – AII. XVII, Item 47.CE marked and manufactured in accordance with EN 13813, and classified at CT-C30-F7-E – consult manufacturer for information. Smoothing and levelling underlay compounds

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapecem
Special fast setting hydraulic binder for the preparation of fast-drying screeds with controlled shrinkage.Mapecem is used for the formation of bonded, unbonded and floating screeds on both existing and new slabs for the installation of humidity-sensitive floors (wood, PVC, linoleum, carpet, rubber) or any other flooring where fast-drying and rapid laying is required. It must always be mixed with graded aggregates. Bonded screeds (from to 10 mm thicknesses) and patching first require the application of a Mapecem and Planicrete anchoring slurry. For unbonded screeds (at least 35 mm thicknesses) lay a polyethylene sheet before hand.Features and benefits:Capacity to harden in just a few hours and to dry perfectly at whatever thickness within 24 hours (residual moisture less than 2% water by weight). Quick-drying levelling screed mixes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapecem Pronto - Pre-blended, rapid drying screed binder
A ready-to-use pre-packed fast setting hydraulic mortar for the preparation of fast-drying (24 hours) screeds with controlled shrinkage.Mapecem Pronto is used for the formation of floating unbonded and bonded screeds on existing and new slabs, for the installation of wood, PVC, linoleum, carpeting, rubber or any other type of flooring where fast drying or immediate laying is required. It is ready-to-use and must be mixed just with water.Bonded screeds (thicknesses less than 35 mm) require the application of a Mapecem Pronto and Planicrete anchoring slurry. Floating screeds (thicknesses above 35 mm) must be laid over a polyethylene sheet. Quick-drying levelling screed mixes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapecoat 4 LVT - Anti-slip finish for LVT
Two component aliphatic, anti-slip polyurethane finish in water dispersion for LVT.Features and benefits:Mixing ratio: 5/1.Dust dry: 30 minutes.Touch dry: 50 minutes.Re-varnishing (if required): min. 2 hours - max. 48 hours (after more than 48 hours, the surface will need to be adequately prepared with a red or green ULTRACOAT PAD).Set to light foot traffic: 16 hours.Ready for use (also in contact with shower water): 24 hours.EMICODE: EC1 R - very low emission.Gloss level (approximate value): 10-30 gloss.Slip resistance according to DIN 51130 and AS 4586: R11.Barefoot slip resistance according to DIN 51097 and AS 4586: A+B.Slip resistance according to EN 13036-4 and AS 4586 (pendulum method):dry: 90;wet: 55.Resistant to abrasion, streaks and ultra-violet rays.Odourless.Seals joints in LVT floor and wall coverings.Solvents free with low emission (EMICODE EC1 PLUS) and harmless for floor installers and end users. Cement-based screed surface sealers

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapecoat I 24
Coating applied in two coats with solvent free epoxy. Used on concrete floors, storage tanks and flumes which come into contact with aggressive chemicals such as acids and hydrocarbons. BS 8204-6: Type 2 floor classification. Typical thickness: 0.6–1.0 mm.System includes:Primer SN.Mapecoat I 24: Epoxy paint for acid-resistant coating of concrete surfaces.Mapecolor paste: For colouring neutral Mapecoat I 24 (if required). Cement-based screed surface sealers

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapecoat I 600 W
Two-component, transparent epoxy finish in water dispersion. Used for both consolidating absorbent, porous cementitious substrates and as a primer before the application of Mapefloor System 53 or as a finishing layer on Ultratop.Features and benefits:Thickness: 0.1–0.3 mm.BS 8204-6: Type 1 floor classification. Cement-based screed surface sealers

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapecoat I 620 W
Two-component coating applied in two coats using solvent-free epoxy.System includes:Mapecoat I 600 W: Primer, two component, transparent epoxy finish in water dispersion.Mapecoat I 620 W: Epoxy paint for acid-resistant coating of concrete surfaces.Mapecolor paste: For colouring Mapecoat I 620 W (if required). Cement-based screed surface sealers

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapefloor CPU/HD
Polyurethane cement-based formulate, with high mechanical strength and resistance to chemicals. Applied at a thickness 6–9 mm, it is ideal for finishing floors subject to heavy traffic, high chemical attack and subject to high thermal shock.Features and benefits:Coloured with Mapecolor CPU.High resistance to chemicals.Good resistance to the stresses caused by the passage of forklift trucks and rubber-wheeled vehicles. Polymer-modified cementitious mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapefloor CPU/MF
Polyurethane and cement based formulate with high mechanical strength and resistance to chemicals. Applied at a thickness 3.0–4.0 mm, the product offers good resistance to the stresses caused by the passage of forklift trucks and rubber-wheeled vehicles.System includes:Primer SN.Quartz 0.5.Mapefloor CPU/MF.Features and benefits:Coloured with Mapecolor CPU.High resistance to chemicals. Polymer-modified cementitious mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapefloor CPU/RT
Three-component, high-strength, easy-to-apply, polyurethane-cement mortar with high resistance to chemicals. For coating industrial floors in layers from 6-9 mm thick.Features and benefits:Coloured with Mapecolor CPU.High resistance to chemicals. Polymer-modified cementitious mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapefloor I 302 SL
Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial flooring.Features and benefits:Self levelling. Epoxy resin coatings

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapefloor I 320 SL Concept
Self-levelling, solvent-free epoxy dressing with a granular effect to create floors which are resistant to abrasion.Features and benefits:Available in a variety of colours - please consult manufacturer for exact details. Flow applied flooring

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapegrout T40
A premixed powdered mortar composed of cement, graded aggregates and special additives. When mixed with water, Mapegrout T40 forms an easy to apply thixotropic mortar that can be applied without slumping even in substantial thicknesses on vertical surfaces without formwork.The product meets the requirements defined by BS EN 1504-9 and the minimum requirements claimed by BS EN 1504-3 for structural mortars of class R3.Features and benefits:Moderate flexural and compressive strength.Has a modulus of elasticity, thermal expansion coefficient and permeability coefficient similar to that of medium quality concrete.Waterproof.Excellent adhesion to existing concrete surfaces provided they are saturated with water and reinforcing bars are first treated with Mapefer or Mapefer 1K. Thixotropic resin grouts

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapegrout T60
A one-component pre-blended thixotropic cement-based mortar composed of sulfate-resistant hydraulic binders, synthetic polyacrylonitrile fibres, organic corrosion inhibitors, select aggregates and special water-retaining additives.The product meets the requirements defined by BS EN 1504-9 and the minimum requirements claimed by BS EN 1504-3 for structural mortars of class R4.Features and benefits:Sulfate resistant. Thixotropic resin grouts

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapeguard WP 200 - Anti-fracture and waterproofing membrane
Alkali resistant waterproofing and decoupling membrane, consisting of a waterproof isolating sheet of polyethylene, which has been coated on both sides with a non-woven polypropylene fabric. For use under ceramic and natural stone tiles with a thin-set mortar.Features and benefits: Consists of three layers.Flexible.High tensile strength and bond strength adhesive connection with tile adhesives.Can be directly applied underneath tiles.Provides a thin layer over the substrate.Crack bridging ability. Alkali resistant. Plastics sheets

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapegum WPS - Liquid Waterproofing Membrane
Ready-to-use, solvent-free, single-component grey coloured paste for creating a flexible waterproof membrane before installing ceramic and stone tiles. Polyurethane (PUR) waterproof coatings

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapeker Rapid Set Flex
Cement-based rapid setting adhesive for interior and exterior floor and wall installations of ceramic and porcelain tiles and non-moisture sensitive natural stone. It is a powder composed of a mixture of special cements, selectively-graded aggregates, synthetic resins and setting accelerators that develop high bond strength only three hours after setting.Primer:On gypsum walls or gypsum plasters, a coat of Primer G should be applied before fixing with cement-based adhesives. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapelastic
Mapelastic is a two-component mortar based on cementitious binders, fine-grained selected aggregates, special additives and synthetic polymers in water dispersion. When the two components are mixed together a free-flowing mix is obtained which may be easily applied, even on vertical surfaces, at a thickness of up to 2 mm.Features and benefits:Remains flexible at very low temperatures.Resistant to UV rays. Fibre-reinforced polymer-modified cementitious mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapelastic Foundation
A two component mortar based on cementitious binders, fine grained selected inert materials, special additives and synthetic polymers in water dispersion. It is used to waterproof concrete and masonry structures subject to positive and negative hydrostatic pressure. It is recommended for foundation walls, car parks, underground environments, basins, channels and swimming pools.Features and benefits:Completely waterproof against positive pressure.Waterproof against negative pressure up to 1.5 atm.Resistant to soluble salts.Excellent bonding strength.Highly flexible. Polymer-modified cementitious mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapelastic Smart
A two-component mortar based on cementitious binders, fine grained selected aggregates, special additives and synthetic polymers in water dispersion. Cement-gauged designed mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapelastic Turbo
Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.Features and benefits:Rapid drying.Resistant to UV rays. Polymer-modified cementitious mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapelastic® Aquadefense
Totally solvent-free, ready-to-use, ultra-quick-drying, single-component light blue synthetic resin based paste in water dispersion. It is used to form waterproof layers before applying ceramic, stone and mosaic coatings in balconies and terraces, bathrooms and shower cubicles, laundry rooms and saunas and damp environments in general.Substrates:Can be applied on substrates including:Concrete.Cementitious screeds and screeds made from special binders.Plasterboard (for internal applications only).Existing coating in ceramic, terrazzo and stone.Cementitious render.Features and benefits:Ready to use.Flexible.Ultra-rapid drying. Water-dispersible polymer waterproof coatings

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapeplan®
Synthetic roofing waterproofing membranes constructed from PVC-P, produced in one multi-extrusion coating process with high quality raw materials. Polymeric membranes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapeplan® T
Synthetic roofing waterproofing membranes constructed from flexible polyolefin (FPO), produced in one multi-extrusion coating process with high quality raw materials. Conform to BS EN 13956. Polymeric membranes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapeproof 1K Turbo - Surface Damp Proof Membrane
Single component, solvent free, moisture curing and rapid drying polyurethane surface primer/ membrane with very low emission of volatile organic compounds (EMICODE EC1 R). The product hardens due to the humidity present in the surrounding air and in the screed.Waterproofing cementitious screeds, which are not subject to rising damp, but have a residual humidity content higher than the British Standard 75% RH (BS 8203) for laying resilient and wood flooring.Features and benefits:Solvent free.Moisture curing.Rapid drying.Very low emission of volatile organic compounds. Floor covering primers

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapeproof ESM
A two component, solvent free, pure epoxy resin, for use as a moisture vapour barrier on cement based substrates containing high residual moisture.It has low viscosity and high penetration capacity into the porosity of the substrate.Features and benefits:Excellent resistance to abrasion, moisture and temperature.Because of the absence of solvents and very low odour, it can be used in inhabited environments. Concrete sealers

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapeproof One Coat - Surface Damp Proof Membrane
Two-component, single coat application, damp proof membrane for controlling residual and constructional moisture in cementitious substrates.It is used on cementitious floors with residual or constructional moisture levels of above 75% RH and below 97% relative humidity prior to the installation of resilient floor coverings.The product can be applied over mechanically prepared power floated concrete sub floors or over sand/ cement screeds that are laid over an effective moisture barrier.Features and benefits:Can be used with underfloor heating systems. Epoxy resin coatings

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapesil AC
A solvent-free, acetic cross-linking mildew resistant silicone sealant designed for sealing expansion joints of +20% expansion of the initial size in interior and external ceramic tile walls and floors in swimming pools, bathrooms and showers. If permanently under water, sides of movement joint should be primed with Mapei Primer FD.Features and benefits:Excellent durability.High elasticity.Waterproof and permeable to vapour.Resistant to chemical agents.Easily workable. Silicone construction joint sealants

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapesil LM
A one-part neutral cross-linking, low modulus silicone sealant designed for sealing expansion joints of +25% expansion of the initial size in interior and external ceramic tile walls and floors. It is unsuitable for continuous water immersion.Features and benefits:Solvent-free.Odourless.Non-staining. Silicone construction joint sealants

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapesilent Slatted
High quality polyethylene foam certified to BS EN ISO 717/2 which achieves 19 dB at 3 mm thickness and 22 dB at 5 mm (ratings may vary dependent on the adhesive applied).Slats have to be filled with Ultrabond S997 1K elastic, solvent-free, single part, silane-based thixotrophic adhesive or Ultrabond P990 1K elastic, solvent-free, single part, polyurethane-based adhesive.Features and benefits:Sound reducing.Helps to eliminate small substrate unevenness.Slats to be filled with Ultrabond S997 1K. Resilient layer insulation

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapesonic CR - Acoustic membrane
Thin section soundproofing membrane designed to reduce impact sound transmission in existing buildings without the need to remove floors or screeds. Suitable for renovation projects in flats, hotels, offices, rest-homes and schools.Features and benefits:Sound reducing.Very low emission of volatile organic compounds. Resilient layer insulation

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapetherm AR1 GG
A grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm.Benefits:Low viscosity and therefore good workability.High thixotropic consistency – Mapetherm AR1 GG may be applied on vertical surfaces without running and without the risk of insulating panels slipping, including large sized panels.Bonds perfectly to all materials normally used in the construction industry.Hardens without shrinking. Cement-gauged designed mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapetherm Cork
Cork insulating panels for thermal insulation systems.Product variations in this file:Mapetherm Cork 50;Mapetherm Cork 60;Mapetherm Cork 80;Mapetherm Cork 100.Features and benefits:Excellent permeability to vapour and excellent stability against ageing. Agglomerated composition cork tiles

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapetherm EPS Grey
Extruded sintered polystyrene insulating panels for thermal insulation systems. Product variations:Mapetherm EPS Grey 40;Mapetherm EPS Grey 50;Mapetherm EPS Grey 60;Mapetherm EPS Grey 80;Mapetherm EPS Grey 100. Expanded polystyrene (EPS) boards

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapetherm EPS White
Extruded sintered polystyrene insulating panels for thermal insulation systems. Product variations:Mapetherm EPS White 40;Mapetherm EPS White 50;Mapetherm EPS White 60;Mapetherm EPS White 80;Mapetherm EPS White 100. Expanded polystyrene (EPS) boards

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapetherm Flex RP
Cement-free, fibre-reinforced, lightweight elastic flexible skimming paste resistant to biological agents for internal and external use.Available in the following granulometries: 0.5 mm and 1.5 mm.Features and benefits:Consistency: paste.Colour: white or various colours using the ColorMap ® automatic colouring system.Density (g/cm³): approx. 1.45-1.50 (according to grain size).Application temperature (of the substrate and the air): from +5°C to +35°C.Cleaning: water.Storage: 24 months.Consumption:0.5 mm: 1.9-2.1 kg/m² per 1 mm of thickness;1.5 mm: 4.0-5.0 kg/m² per 1 mm of thickness.Packaging: 20 kg drums.Resistant to biological agents.For internal and external use.Colourable.Two grades available (0.5 mm and 1.5 mm). Solvent-free cellulose adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapetherm Mineral Wool
High-density, glass wool insulating panels for thermal insulation systems.Product variations:Mapetherm Mineral Wool 40;Mapetherm Mineral Wool 50;Mapetherm Mineral Wool 60;Mapetherm Mineral Wool 80;Mapetherm Mineral Wool 100.Features and benefits:Excellent fire resistance.Extremely high permeability to vapour and excellent soundproofing properties. Mineral wool insulation

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapetherm Net
Glass fibre mesh resistant to alkalis, ideal for reinforcing skim coats for repairing facades and installing Mapetherm thermal insulation systems. Glass fibre mesh reinforcement

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapetherm Phenolic
Product variations in this file: Mapetherm Phenolic 40  Mapetherm Phenolic 50  Mapetherm Phenolic 60  Mapetherm Phenolic 80  Mapetherm Phenolic 1000 Phenolic foam boards

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: MapeWall GPR
General purpose render suitable for internal and external use. Prepares surfaces to be finished in one of the products from the Mapei range of coatings.Features and benefits: Pumpable.Can be hand applied.Suitable for use with a variety of finishes.High yield and high impact.Water repellent.Good levelling properties.Easy to use product – just add water.CE marked, and manufactured in accordance with EN 998-1. Cementitious renders

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Mapewrap C Uni-AX HM
High strength, unidirectional, carbon fibre fabric with very high modulus of elasticity (390 000 N/mm²). Fibrous reinforcement

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Modibond
A range of polyester based torch-on cap sheets, coated with a high quality polymer modified APP bitumen coating. The underside of Modibond and Mineral Modibond is protected by Polyflam, a special polyethylene film which melts upon torching. In the mineral version, the top surface is protected by a uniform layer of slate chippings and has a lateral selvedge for overlapping making application fast and secure.Modibond torch-on membranes provide reliable and effective flat roof waterproofing, combining the qualities of excellent performance, good handling characteristics and economy. The membranes exhibit excellent dimensional and mechanical stability making them suitable as part of a built-up system, or as a refurbishment overlay to existing asphalt or selected surface bitumen membranes.Features and benefits:Torch-on application.Strong non-woven rot resistant polyester fabric.Durable APP polymer modified bitumen with NAT Technology.Low temperature flexibility.Cost effective performance.Ten year product warranty. Reinforced bitumen roofing sheets

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Nivoplan
An ultra-fast setting thixotropic cement-based, levelling mortar for interior horizontal or vertical surfaces. Nivorapid is suitable for repairing or levelling steps, edges of columns, landings and risers of floors, walls and soffits. It is particularly recommended where the substrate must be put back into use within a short time.Nivorapid is metal trowel applied. Thixotropic resin grouts

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Pipe and Tube Collars
Pipe and tube collars manufactured from IGOM CE thermoplastic rubber. The collars have high resistance to ultra violet rays, ozone, and other atmospheric and chemical agents. They can be used over a wide range of temperatures and remain flexible at low temperatures. The collars should be sealed with a screw-able fixing ring to ensure a watertight seal is achieved. Polyethylene (PE)-based flashings

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Plana P
A range of polyester based torch-on cap sheets, coated with a high quality polymer modified APP bitumen coating. The underside of Plana P and Mineral Plana P is protected by Polyflam, a special polyethylene film which melts upon torching. In the mineral version, the top surface is protected by a uniform layer of slate chippings and has a lateral selvedge for overlapping making application fast and secure.Plana P torch-on membranes provide reliable and effective flat roof waterproofing, combining the qualities of excellent performance, good handling characteristics and economy. The membranes exhibit excellent dimensional and mechanical stability making them suitable as part of a built-up system, or as a refurbishment overlay to existing asphalt or selected surface bitumen membranes.Features and benefits:Torch-on application.Strong non-woven polyester fabric.Durable APP polymer modified bitumen.Low temperature flexibility.Cost effective performance.Ten year product warranty. Reinforced bitumen roofing sheets

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Plana V
A range of glass fibre based torch-on underlays, coated with a high quality polymer modified APP bitumen coating. The underside of Plana V is protected by Polyflam, a special polyethylene film which melts upon torching. In the TT version, the top surface is also protected by a layer of Polyflam providing a bitumen rich surface to receive the subsequent layer of torch on.Plana V torch-on membranes provide reliable and effective flat roof waterproofing, combining the qualities of excellent performance, good handling characteristics and economy. The membranes exhibit excellent dimensional and stability, making them suitable as part of a built-up system over a fully supported and suitably prepared surface.Features and benefits:Torch-on application.Dimensionally stable reinforced glass fibre base.Durable APP polymer modified bitumen.Low temperature flexibility.Cost effective performance.Ten year product warranty. Reinforced bitumen roofing sheets

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Planiseal 88 - Osmotic Cementitious Mortar
A pre-blended waterproofing mortar formulated from cement compounds and special waterproofing additives. Fibre-reinforced polymer-modified cementitious mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Planitop Fast 330
CE marked fibre-reinforced cementitious mortar for internal and external floors and walls, applied at a thickness from 3–30 mm to smooth out irregularities to make them quickly suitable for laying ceramic and stone or for waterproofing with liquid applied or flexible cementitious systems. Cement-gauged designed mortars

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Plastimul 1K Super Plus
Single component, quick drying highly flexible bitumen waterproofing emulsion with added polystyrene beads and rubber granules. Cold-applied bitumen solutions

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Polyshield
A high performance polyester based torch-on cap sheet, coated with a high quality polymer modified APP bitumen coating. The underside of Polyshield TS 4 Mineral is protected by Polyflam, a special polyethylene film which melts upon torching. The top surface is protected by a uniform layer of slate chippings and has a lateral selvedge for overlapping making application fast and secure.It is an exceptionally high quality flat roof waterproofing membrane which, combined with other components from the extensive Polyglass range of components, provides a comprehensive and cost-effective flat roofing solution for new build and refurbishment projects.Features and benefits:BBA Approved.Fire performance (to BS 476-3): FAA (Warrington Fire Research Centre).Durable and rot proof spunbond polyester fabric with glass stabilization providing excellent durability.Latest high quality APP polymer modified bitumen for improved UV resistance.Low temperature flexibility.Cost effective performance.Guarantees available upon application. Reinforced bitumen roofing sheets

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Polytrim
Simple to install, maintenance free roof edge trims for use with built up felt flat roof systems. The trims are manufactured from glass fibre reinforced polyester resin and are available in various colours. Straight and corner connecting pieces are also supplied with the system. Pre-formed 90º external and internal angles are also available. Edge trims

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Polyvap
A range of high performance, aluminium cored vapour control layers (VCLs) coated with a high quality polymer modified bitumen coating. The underside of Polyvap TT and Polyvap TS are protected by Polyflam, a special polyethylene film which melts upon torching. In the Polyvap TT version, the top surface is also protected by a layer of Polyflam, providing a bitumen rich surface. The top surface of Polyvap TS has a coating of fine sand thereby enabling the use of bitumen or Polyglass polyurethane adhesive to bond insulation to the upper face of the VCL. Polyvap SA is a self-adhesive membrane manufactured using ADESO® technology and can be incorporated in to a completely flame free ADESO® self-adhesive roofing system.Features and benefits:Torch-on and self-adhesive applications available.Aluminium core stops ingress of water vapour and damage to roof construction.Durable polymer modified bitumen coating.Cost effective performance.Part of a complete package of waterproofing components. Reinforced bitumen roofing sheets

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Primer G - Primer
A synthetic resin-based primer in water dispersion with very low emission of volatile organic compounds (VOC). Universal primers

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Purtop Easy
One-component elastic polyurethane waterproofing membrane.Features and benefits:Forms a highly elastic and durable membrane (Purtop Easy System Roof has a certified service life of 25 years according to ETAG 005).Ready-to-use product and easy to apply.Seamless, with no overlaps and excellent crack-bridging properties which is able to withstand normal dynamic stresses acting on structures.When Purtop Easy is admixed with Purtop ADY, it may be applied in a single 1.2 mm thick coat and has better technical properties and lower drying times.Maintains its mechanical properties at temperatures down to -40°C.Trowel or spray application.CE Marked and manufactured according to EN 1504-2 and EN 14891.Consult manufacturer's literature for application guidelines and substrate preparation details. Polyurethane (PUR) waterproof coatings

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Quarzolite Tonachino Plus
Acrylic resin in water dispersion and super-fine quartz based paint used for the protecting and decorating internal and external surfaces.Resistant to all climatic conditions and the aggressive attack of smog, salt and sunlight, and provides long-lasting protective coat for the substrate.Bonds perfectly to all types of renders and to existing paintwork if well-bonded and sound and to gypsum in interiors after application of Quarzolite basecoat.Features and benefits:Quarzolite tonachino plus contains an anti-mould and anti-mildew agent.Quarzolite tonachino plus contains synthetic fibres for good crack resistance.Quarzolite tonachino plus bonds perfectly to all types of conventional renders and to old, well-bonded paintwork. Water-based masonry paints

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Roof Drains
A range of roof drainage outlets for flat roof applications.Integradrain:Anti-backup roof outlets constructed from IGOM CE thermoplastic rubber, specially designed to obtain a high quality product with excellent physical and technical properties. Integradrain outlets can be used for most types of roofing and are compatible with all kinds of bituminous membranes. They have high resistance to ultra violet rays, ozone and other atmospheric and chemical agents. The outlets can be used within a wide range of temperatures and remain very flexible at low temperatures.SUREFIX Roof Drain:The SUREFIX Roof Drain is amongst the best means of connecting a roof system to an outlet drain and is suitable for use on all flat roof applications for either commercial or residential buildings. The fastening and seal between the roof system is achieved mechanically, forming a secure fix between roof system and drain. The unit is constructed from Dutral rubber which has excellent physical and chemical characteristics with superior resistance to breakdown by sunlight, ozone and other atmospheric agents. The unit consists of a flexible of a flexible circular flange with six stainless steel lugs. The unit incorporates a 30 mm deep, 170 mm diameter sump to ensure that even storm water will flow quickly into the drain. Gravity rainwater outlets

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Roof Vent
Roof vents permit ventilation of waterproof coverings. Special channels under the flange help transfer moisture vapour from within waterproofing systems. Blistering of the membrane is eliminated and the thermal characteristics of any insulation is maintained. Polyethylene (PE)-based flashings

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Silancolor Paint
Highly vapour permeable and water repellent silicone based paint in water dispersion for exteriors and interiors. The product offers the advantages of traditional mineral based paints as well as synthetic paints. It adheres onto all types of traditional renders, dehumidifiers and old, well bonded paint, and it resists chemical aggression, alkali, washing, UV rays and ageing.Features and benefits:Very permeable to water vapour.Considerably water repellent.Excellent resistance to alkali, washing, UV rays and ageing. Water-based masonry paints

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Silancolor Tonachino
Silicone resin based plaster, supplied in paste form. For use on top of Silancolor Primer or Base Coat.Features and benefits:Creates a rustic effect for exterior finishing.Available in different grain sizes.Suitable for use on walls which require attractive finishing, water repellence and transpirancy, and vapour permeability.High filling properties.Contains synthetic fibres for crack resistance.Uniform colour tone.High adhesion onto existing paints and dehumidifiers, and all types of traditional renders that are well bonded to the substrate.Creates a porous film, allowing the render to remain dry.Protects the substrate from chemical aggression, does not show dirt easily, and is resistant to UV rays and ageing.CE marked and complies with the requirements of EN 15824, 'Specifications for external renders and internal plasters based on organic binders', for internal and external use.Ready to use product. Finish plasters

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Silancolor Tonachino Plus
Silicone resin based plaster coating, supplied in paste form. For use on top of Silancolor Primer Plus.Features and benefits:Creates a rustic effect; attractive finish on interior and exterior surfaces.Available in different grain sizes.Suitable for use on walls where environmental conditions favour the growth of algae, mould and fungi (contains anti-mould and anti-algae agents to help prevent their formation).Used to help improve wall hygiene.Gives good water repellence and transpiration to the substrate.Makes the substrate permeable to water vapour.Good filling capacity.Contains synthetic fibres for crack resistance.Uniform colour tone.Forms an efficient, long-lasting protection system when used in conjunction with Silancolor Primer Plus and Silancolor Cleaner Plus.High adhesion onto existing paints and all types of traditional and dehumidifying renders that are well bonded to the substrate.Creates a porous film, allowing the render to remain dry.Protects the substrate from chemical aggression, does not show dirt easily, and is resistant to UV rays and ageing.CE marked and complies with the requirements of EN 15824, 'Specifications for external renders and internal plasters based on organic binders', for internal and external use.Ready to use product. Finish plasters

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Topcem - Rapid drying screed binder
A special hydraulic binder which, when mixed with graded aggregates and water, has the property of hardening within 24 hours, and of completely drying within seven days, independent of thickness. Features and benefits:Topcem is a special hydraulic binder which, when mixed with graded aggregates and water, can produce an early drying high strength screed ready to receive floor finishes between 24 hrs and four days.Topcem is defined within BS 8204 -1 section 5.1.3 part F. Quick-drying levelling screed mixes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Topcem Pronto
Ready to use, pre-blended, normal-setting mortar with controlled shrinkage for fast-drying screeds (four days).Topcem Pronto is used to form bonded, unbonded and floating screeds on new or old slabs prior to installing moisture-sensitive flooring (wood, PVC, linoleum, carpet, rubber, etc.) or any other type of flooring in areas where fast-drying screeds are required to shorten completion times. Topcem Pronto is ready to use. Bonded screeds require the application beforehand of a Topcem Pronto and Planicrete bonding slurry. Unbonded screeds (more than 35 mm thick) must be laid over polyethylene sheeting. Quick-drying levelling screed mixes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultrabond Eco 4 LVT - LVT Flooring Adhesive
Fibre-reinforced LVT adhesive that guarantees the highest performances in terms of adhesion and dimensional stability.Features and benefits:Very good peel strength.Highly shear resistant.Very good dimensional stability.Very low emission of volatile organic compounds. Polyurethane (PUR) adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultrabond Eco S940 1K
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds. Polyurethane (PUR) adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultrabond Eco S955 1K
Single component, isocyanate, epoxy resin and solvent-free, silylated polymer-based adhesive with a very low emission level of volatile organic compounds (EMICODE EC1 R Plus), for all types of parquet flooring. Polyurethane (PUR) adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultrabond Eco Tack TX+ - Carpet Tile Tackifier
Acrylic-based adhesive designed to provide a permanently tacky film when dry, to allow the removal and replacement of carpet tiles when required. It can also be used to prevent loose lay LVT, textile floorings and carpet underlayments from slipping or moving.Features and benefits:Wheelchair stress: Suitable (according to EN 12529).Suitable for underfloor heating.Very easy to apply by roll.Very low consumption.Fast drying.Easy removal or replacement of individual, damaged or worn tiles and coverings.Suitable for exposure to castor wheels in accordance with EN 12529.Not flammable.EMICODE EC1 Plus (very low emission).Blauer Engel DE-UZ 113.Good resistance to moisture and excellent resistance to ageing. Acrylic and methacrylate adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultrabond Eco VS90 Plus - Flooring Adhesive
Universal high temperature solvent-free, non-staining acrylic adhesive in water dispersion, formulated in an easily trowellable paste, with very low emissions of volatile organic compounds. Features and benefits:Good peel strength.Highly shear resistant.Very good dimensional stability. Acrylic and methacrylate adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultrabond P980 1K
Single-component, solvent-free polyurethane adhesive with a very low emission level of volatile organic compounds for bonding pre-finished, multi-layered parquet. Polyurethane (PUR) adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultrabond P990 1K
A ready-to-use, solvent-free, single-component, elastic adhesive for the installation of all types of wooden and laminate flooring. Polyurethane (PUR) adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultrabond S997 1K
Single component, solvent-free, ready to use flexible thixotropic sililated-based adhesive for laying wooden steps and wood mosaics. Polyurethane (PUR) adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultracoat Aqua Plus
Solvent and NMP-free, odourless, water-based binder, mixed with wood flour filler, for grouting wooden floors. Resin grouts

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultracoat Easy Plus
Single-component, water-based 100% polyurethane varnish with very low emission level of VOC and no NMP, highly resistant to wear and abrasion, for wooden floors. Clear floor varnishes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultracoat High Traffic
Two-component, NMP-free, 100% polyurethane water-based varnish with high resistance to wear and abrasion and very low emission of volatile organic compounds for wooden floors.Features and benefits:High resistance to wear and abrasion.Very low emission of volatile organic compounds. Clear floor varnishes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultracolor Plus - Tile grout
A fast -setting and drying grout designed for grouting all types of ceramic tiles, glass mosaic, natural stone and concrete framed glass blocks on walls and floors in interior and external situations.Features and benefits:It is designed not to produce efflorescence.Ultracolor is classified CG2 WA to prEN 13888.Available in 41 colours with new colours added - consult manufacturer for specific requirements.Very low emission of volatile organic compounds and fully offset Greenhouse Gas Emissions Cementitious and reaction resin grouts

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultraflex S2 Quick - Tile adhesive
A one-component, highly flexible, high performance, quick-setting and hydrating cementitious adhesive. Ultraflex S2 Quick is easy to trowel, has no vertical slip and a high yield for ceramic tiles and stone materials. It is suitable for all sizes and types of tiles: single fired, double fired, porcelain, clinker etc. and natural stone for interior and exterior use.Also suitable for spot bonding of insulation materials such as expanded polystyrene and polyurethane, gypsum board, glass and rock wool, wood-cement panels, formed concrete blocks, sound-deadening panels etc. Ultraflex S2 Quick when hardened is frost-proof and water resistant.Ultraflex S2 Quick is classified to C2FT S2 in accordance with EN 12004.Do not use Ultraflex S2 Quick on metallic, rubber, PVC or linoleum surfaces or with Marble or artifical composite materials. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultralite D2 - Tile adhesive
Ready for use brilliant white lightweight water resistant adhesive with high yield for ceramic wall tiling.Features and benefits:For installing porous bodied ceramic tiles and mosaics onto internal walls and highly deformable substrates.For use in both commercial and domestic shower/ wet areas.For use with slightly larger format porous bodied ceramic tiles up to 350 mm x 350 mm or a variant of i.e 500 mm x 200 mm.Size ranges available.Includes 12.5 kg unit. Tile adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultralite Rapid Flex S1 - Tile adhesive
High performance, single component, flexible, lightweight cement based adhesive with no vertical slip. Low dust technology and extremely high yield. For the installation of ceramic, porcelain (especially thin porcelain) tiles and natural stone.Ultralite Rapid Flex S1 is a grey powder produced from cements, selected graded sand and a high quantity of synthetic resin, with recycled silica micro spheres which contributes to a lightweight product. The innovative low dust technology contained within the adhesive considerably reduces the amount of dust given off when mixed.This CE marked product offers excellent resistant to alkalis, oils and solvents. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultralite S1 - Tile adhesive
Single component, high performance, flexible, lightweight cementitious adhesive with no vertical slip and long open time, low dust technology and extremely high yield. Easy to apply with excellent wetting-out properties, for ceramic, stone and thin porcelains gres tiles.Ultralight S1 is a grey powder made from cement, selected graded sand and a high amount of synthetic resin, with micros-spheres of recycled silica material which helps to make the mix lighter. The innovative low dust technology which characterises this adhesive considerably reduces the amount of dust given off when mixing the product.This CE marked product offers excellent resistance to alkalis, oils and solvents. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultralite S2 Quick - Tile adhesive
Single component, high-performance, highly-deformable, lightweight, rapid-setting and hydrating cementitious adhesive with extended open time, good trowelability, high wetting capacity and extremely high yield, for ceramic tiles and stone, ideal for installing thin porcelain tiles. Cementitious adhesives

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultraplan Eco 3210 - Levelling Compound
An ultra-fast drying, self-levelling compound, designed for use on new or existing interior substrates to receive all kinds of flooring where the maximum resistance to loads and traffic is required, providing the floors are not to be subjected to moisture.Features and benefits:Ultraplan Eco 3210 can be trowel or pump applied.It can be used on existing timber floors, pre-treated with a coat of Mapeprim SP primer, in minimum 3 mm thickness.Ultraplan Eco 3210 has a very low TVOC content.Primers can be specified separately. Smoothing and levelling underlay compounds

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultraplan Renovation Screed 3240
A fibre reinforced self-levelling compound, designed for use in the refurbishment of existing floors in both commercial and domestic applications.It is used for interior levelling, smoothing and removing differences in thickness from 3–40 mm on new or existing concrete, screeds, stone, terrazzo and ceramic tiles, old and new timber floors, floor boards, chip-board panels, plywood and parquet. The product can be hand or pump applied. Fibre-reinforced levelling screed mixes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultratop
Ultra-quick setting self-levelling mortar based on special hydraulic binders, for abrasion-resistant floor coverings at a thickness from 5–40 mm. The product can be used as a finished floor surface, and is used inside industrial and civil buildings to form abrasion-resistant floors.Features and benefits:High compressive and flexural strength. Quick-drying levelling screed mixes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultratop Industrial
Self-levelling industrial floor screed based on hydraulic binders, for use on abrasion resistant flooring.Features and benefits:Can be left as a finished floor.High mechanical strength.Resistant to abrasion.Versatile.Easy to apply.Quick setting; further finishing coats may be applied after a short time.High level of compressive and flexural strength.Bonds well to the substrate.CE marked and manufactured in accordance with EN 13813, 'Screeds and materials for screeds – Materials for screeds – Properties and requirements', and classified as CT-C40-F10-A9-A2fl-s1 – consult manufacturer for information. Ready-mixed levelling and wearing screeds

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultratop Industrial Grey
Ultra-quick setting self-levelling mortar based on special hydraulic binders, for abrasion-resistant floor coverings at a thickness from 5–40 mm.The product can be used as a finished floor surface, and is used inside industrial and civil buildings to form abrasion-resistant floors.Used neat, it is particularly recommended for floors in industrial warehouses, stockrooms subject to traffic with rubber wheels, car-parks, shopping centres and shops.Features and benefits:High compressive and flexural strength. Quick-drying levelling screed mixes

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultratop Loft F
One-component, coarse-grained cementitious paste for creating decorative interior floors and walls.Features and benefits:Can create original designed flooring with a trowelled or mottled effect.Easy to use and prepare – just mix with water.Versatile and can be used in both refurbishment and new flooring projects.Resistant to abrasion.A large variety of coatings can be created due to product consistency and reduced thickness.Can be mixed with Ultratop Color Paste to create a variety of colours and shades.Good resistance to abrasion when hardened.Rapid drying – treated surfaces are ready for use quickly.Can be applied both to horizontal and vertical surfaces.CE marked and manufactured in accordance with EN 13813:2002, and classified as CT-C25-F10-A9-A2fl-s1-A2-s1-d0 – consult manufacturer for information. Ready-mixed levelling and wearing screeds

Published [04/04/2024]

MAPEI UK LTD - WATERPROOFING AND CONCRETE REPAIRS: Ultratop Loft W
One-component, fine-grained cementitious paste for creating decorative interior floors and walls.Features and benefits: Can create original designed flooring with a trowelled or mottled effect.Easy to use and prepare – just mix with water.Versatile and can be used in both refurbishment and new flooring projects.Resistant to abrasion.A large variety of coatings can be created due to product consistency and reduced thickness.Can be mixed with Ultratop Color Paste to create a variety of colours and shades.Good resistance to abrasion when hardened.Rapid drying – treated surfaces are ready for use quickly.Can be applied both to horizontal and vertical surfaces.CE marked and manufactured in accordance with EN 13813:2002, and classified as CT-C25-F10-A9-E – consult manufacturer for information. Ready-mixed levelling and wearing screeds

Published [04/04/2024]