DELTA MEMBRANE SYSTEMS LTD
These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

DELTA MEMBRANE SYSTEMS LTD: Delta® Drain - Drainage sheet
Delta®-Drain is a high-density polyethylene (HDPE) double dimpled sheet with integral polypropylene geotextile for the protection of foundation wall waterproofing against mechanical damage, and for reliable drainage of stratified and slope water.
Plastics sheets, Plastics sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® EQ Drain - Protection and drainage system
A geocomposite membrane for use as a compact protection and drainage system for waterproofing in building construction. Delta-EQ-Drain consists of a HDPE core with an integral polypropylene geotextile for added protection against mechanical damage, and for reliable drainage of groundwater. It conforms to DIN 4095 for drainage and DIN 18195 for waterproofing.
Rubber studded sheets, Plastics or rubber studded sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® Floraxx - Inverted roof drainage
Delta®-Floraxx is used on inverted roofs to drain water away from insulation panels under accessible surfaces. Thanks to its breathable perforation and its dimples, water and air may circulate freely on the underside so that no coherent film of water can form on the insulation. It can be used in extensively planted as well as in accessible inverted roofs covered with paving stones or slabs.
Rubber studded sheets, High density polyethylene (PE-HD) studded sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® FLORAXX in drivable inverted roofs
Delta®-Floraxx is used on inverted roofs to drain water away from insulation panels under accessible surfaces. Thanks to its breathable perforation and its dimples, water and air may circulate freely on the underside so that no coherent film of water can form on the insulation. Can be used in extensively planted as well as in accessible inverted roofs covered with paving stones or slabs.
Flag and slab bound paving systems, Flag and slab bound paving system
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® FLORAXX in walkable inverted roofs
Delta®-Floraxx is used on inverted roofs to drain water away from insulation panels under accessible surfaces. Thanks to its breathable perforation and its dimples, water and air may circulate freely on the underside so that no coherent film of water can form on the insulation. Can be used in extensively planted as well as in accessible inverted roofs covered with paving stones or slabs.
Flag and slab bound paving systems, Flag and slab bound paving system
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® FLORAXX Top - Drainage sheet
Water-retaining drainage sheet with an integrated geotextile for perfect green roofs.
Rubber studded sheets, High density polyethylene (PE-HD) studded sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® FLORAXX TOP in inverted roofs with extensive/intensive herbaceous covers
An innovative dimpled sheet which has been developed specifically for green roofs. Due to its unique dimple structure and its innovative material, its functions include; drainage, water storage and an integrated filtration layer on top. Can be easily laid straight from the roll. An optimum solution for flat roofs which are to be extensively planted which requires minimal maintenance. The octagonal dimples additionally reinforced by ribs make the sheet highly compression resistant.
Semi-intensive green roof systems, Semi-intensive green roof system
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® FLORAXX TOP in warm roofs with extensive/intensive herbaceous covers
An innovative dimpled sheet which has been developed specifically for green roofs. Due to its unique dimple structure and its innovative material, its functions include; drainage, water storage and an integrated filtration layer on top. Can be easily laid straight from the roll. An optimum solution for flat roofs which are to be extensively planted which requires minimal maintenance. The octagonal dimples additionally reinforced by ribs make the sheet highly compression resistant.
Semi-intensive green roof systems, Semi-intensive green roof system
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® Gas Barrier System - Gas barrier and damp-proofing
A high performance polymeric Radon, Methane, CO2 gas barrier and damp proof membrane.
Plastics sheets, Plastics sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® GEO-DRAIN Quattro - Waterproofing and drainage system
A four-ply material for use as a compact protection and drainage system for waterproofing in building construction. Delta-Geo-Drain Quattro consists of a double slip layer, a HDPE core with an integral polypropylene geotextile for added protection against mechanical damage, and for reliable drainage of groundwater. Delta-Geo-Drain Quattro has a high compression strength, and can be used up to depths of 10 metres.
Plastics sheets, Plastics sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® MS 500 - Waterproofing membrane
Delta®-MS500 is a high density polyethylene (HDPE) studded membrane for use on walls, floors, vaults and tunnels as a waterproof system. It can also be used externally for waterproof protection of sub-ground structures. It provides excellent chemical resistance, is completely rot proof and prevents root penetration. The system holds BBA certification 00/3742.
Pr_25_57_51_74, High density polyethylene (PE-HD) studded sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® MS Drain - Waterproof protection layer for basements
High density polyethylene protection layer for basement waterproofing. Dimpled sheet with an integrated drainage layer. Simple and cost-efficient foundation for dry cellar walls. Improved performance, improved protection. Developed from the proven DELTA®-MS sheet, this product further enhances waterproofing protection because its contact area is four times larger than that of a normal dimpled sheet, which improves the distribution of pressure on the waterproofing bitumen coating/sheet by the same factor. An integrated layer of hydrophilic geotextile ensures that intruding water is drained away swiftly and permanently. Attractively priced, DELTA®-MS DRAIN is easy to put up and very easy to handle – the ideal protection for vertical cellar walls.
Rubber studded sheets, Plastics or rubber studded sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® MS Sub-Base Course Protection System
A high density, polyethylene dimpled sheet designed as an alternative to traditional lean-concrete sub-base course.
Rubber studded sheets, High density polyethylene (PE-HD) studded sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® MS20 - Damp-proofing
Delta®-MS20 is a high-density polyethylene (HDPE) dimpled sheeting with a high drainage capacity and compressive strength, suitable for high performance seepage layers in building and civil engineering construction. Also used on basement floors as part of the Delta system, to maximise drainage capacity. Delta®-MS20 holds BBA certification 00/3742.
Rubber studded sheets, High density polyethylene (PE-HD) studded sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® NP Drain - Drainage sheet
A high density polyethylene drainage sheet designed for use in underground structures including retaining walls, cut and cover tunnels, underground car parks etc. Its high compression strength allows installation depths up to 5 metres.
Plastics sheets, Plastics sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® Plaster Lath - Damp proof lathing
A damp proof system for walls, consisting of a dimpled membrane with a mesh face, providing a key for plaster, render or dab fixed plasterboard. Delta-Plaster Lath holds BBA certification 00/3742.
Damp-proof lathings, Damp-proof lathing
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® PT - Original Waterproof Membrane System
A dimpled waterproof membrane with a mesh face, providing a key for plaster, render or dab fixed board finish. The Delta-PT membrane is used for waterproofing or damp-proofing, and is complimented with proprietary sealing tapes and self sealing fixings. The system is BBA approved.
Damp-proof lathings, Damp-proof lathing
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® TERRAXX in drivable roof decks
DELTA® Terraxx is a high-density polyethylene dimpled sheet which acts as a surface drainage layer. Laminated on to the dimpled sheet, a layer of compression-resistant permanent filtration geotextile prevents the dimple structure from being clogged up by sludge, thus guaranteeing optimum drainage in the long run. Terraxx is an external membrane that can be used vertically and horizontally.
Flag and slab bound paving systems, Flag and slab bound paving system
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® TERRAXX in extensive green roofs
A high-density polyethylene dimpled sheet which acts as a surface drainage layer in vertical and horizontal applications.
Extensive green roof systems, Extensive green roof system
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® TERRAXX in intensive green roofs
A high-density polyethylene dimpled sheet which acts as a surface drainage layer in vertical and horizontal applications.
Intensive green roof systems, Intensive green roof system
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® TERRAXX in walkable roof decks
A high-density polyethylene dimpled sheet which acts as a surface drainage layer in vertical and horizontal applications.
Flag and slab bound paving systems, Flag and slab bound paving system
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® Thene - Self-adhesive waterproofing sheet
A cold-setting, self-adhesive waterproofing sheet, designed for vertical and horizontal exterior and interior surfaces.
Bitumen sheets, Bitumen sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: DELTA® Trela Plus - Damp-proofing
Delta®-Trela and Trela Plus consist of a 3-ply spun-bonded polypropylene breather underlay base sheet laminated to a dimple-textured random-fibre spacer mat to provide a permanent air gap under the cladding, preventing moisture accumulation. Delta®-Trela Plus includes an integrated self-adhesive edge.
Vapour permeable sheets, Vapour permeable sheets
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: Dual V3 Sump - Pump station
A packaged pump station designed to collect groundwater through the clear opening in the top of the chamber and/ or via a Delta perimeter channel system or via a series of drainage pipes through the side inlets of the sump, (Ref: Delta detail 129).
Private packaged pumping stations, Private packaged pumping stations
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: Foul V3 - Pump Station
A packaged pump station designed to collect foul water in a basement application where there are other facilities in the property on gravity drainage.
Private packaged pumping stations, Private packaged pumping stations
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: Koster Deuxan 2C - Cold applied polymer modified bitumen waterproof coating
Features: Usage: Primer: Reinforcement: Embed Köster Glass Fibre Mesh at corners, fillets and areas strongly in danger of cracking. Expansion joints: Seal expansion joints by applying Köster Special Joint Tape in the joint areas of the thick film sealant. Protection:
Liquid applied waterproofing, Cold applied polymer modified bitumen waterproof c
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: Koster NB1 - Crystallization active slurry mortar
Features: Usage: Primer:- Köster Polysil® TG 500:Recommended for use on highly and normally absorbent and dusty or salt-damaged substrates. Mixing:
Mortars and grouts, Mineral coating containing crystallizing and capil
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: Memtech LGB - Cold applied bitumen solutions
A ready-to-use, styrene butadiene latex-based, liquid-applied gas membrane. It offers continuous protection against the ingress of radon, methane, carbon dioxide, ground gas, volatile organic compounds (VOCs), air and moisture into buildings. As the product is a barrier to moisture, it can also be used as a damp-proof membrane (DPM) on walls and floors. The membrane can be applied by brush, roller or airless spray. A minimum dry-coated thickness of 1.0 mm is needed to provide a gas barrier. To achieve this, a total of 2 kg/m² is required. It should not be applied in wet conditions or in temperatures below 7°C. Delta Memtech LGB is compatible with loose laid membranes supplied by Delta Membrane Systems Ltd, such as Delta Memtech M1, Delta Memtech R1,Delta MS Membranes and Delta Memtech-TITAN. Advantages:
Bitumens, binders and bonding compounds, A ready-to-use, styrene butadiene latex-based, liq
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: Memtech M1 - Plastics sheets
A flexible, loose-laid gas barrier for use on sites with radon, carbon dioxide and methane ground gas. Protects against the ingress of hydrocarbon vapours where it is separated from the ground, e.g. above a block and beam floor. The barrier incorporates a two-layer low density polyethylene membrane with a polypropylene reinforcement grid and an aluminium foil core. Extremely flexible for ease of installation and robust to cope with site conditions. Advantages:
Membranes, A flexible, loose-laid gas barrier for use on site
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: Memtech Titan - Plastics sheets
Safe solution for the protection of buildings and occupiers against all levels of hydrocarbon, methane, CO2 and Radon gas ingress. Conforms to BS 8485:2015 and requirements of CIRIA 748 VOC membranes. Resistant to range of aggressive hydrocarbons, durability and chemical resistance tested in accordance with EN 14414-A.
Membranes, Multi layer polyethylene membrane specifically des
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: Memtech Titan Bond - Plastics sheets
Pre-applied waterproofing membrane and VOC gas barrier conforming to the requirements of BS 8102 (2009) Type A barrier Protection and BS 8485:2015 and CIRIA 748. Provides a safe solution for below ground structures against hydrocarbons, VOCS and ground gases as well as a fully compliant pre-applied waterproofing membrane. Suitable for basements, retaining walls, tunnels and foundations.
Membranes, Multi layer polyethylene membrane with a bonded te
Published [06/07/2023]

DELTA MEMBRANE SYSTEMS LTD: Single V3 - Pump Station
A packaged pump station designed to collect groundwater through the clear opening in the top of the chamber via a Delta cavity membrane system.
Private packaged pumping stations, Private packaged pumping stations
Published [06/07/2023]