TIMLOC BUILDING PRODUCTS

TIMLOC HOUSE
OZONE PARK
HOWDEN
EAST YORKSHIRE DN14 7SD

Tel: 01405 765567
Fax: sales@timloc.co.uk

Company Logo

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

TIMLOC BUILDING PRODUCTS: 110 mm Flexi-Pipe Kits
110 mm Flexi-Pipe kits for connection to ventilation duct or soil vent pipe.Features and benefits:Provides a precise fit to 110 mm duct or soil vent pipe. Flexible to bend into position during installation. Tough to avoid tearing or damage and maintain its cross-sectional shape.110 mm outside diameter fits directly to Timloc tile vent spigots.Compatible with flexible, semi-rigid and rigid duct for further connection to a ventilation system.Can be secured with supplied adjustable screw clamp, zip ties or glued/screwed.To connect Timloc roof tile vents to 110 mm ventilation duct or soil vent pipe. Components supplied in each kit:RTV-KIT1 contains 1x Flexi-Pipe and 1x Screw Clamp (compatible with: Mini Castellated Tile Vent / Single Pantile Tile Vent).RTV-KIT2 contains 1x Flexi-Pipe, 1x RTV-ADS Standard Adapter and 1x Screw Clamp (compatible with: Castellated Tile Vent / Double Pantile Tile Vent / Double Roman Tile Vent / Thin Leading Edge Tile Vent / Flat Edge Tile Vent / Non-Profile Tile Vent).RTV-KIT3 contains 1x Flexi-Pipe, 1x RTV-ADP Plain Adapter and 1x Screw Clamp (compatible with: Plain Tile Vent / Interlocking Plain Tile Vent / Low Profile Plain Tile Vent \ Slip Plain Tile Vent).RTV-KIT4 contains 1x Flexi-pipe, 1x RTV-ADIS Inline Slate Vent Adapter and 1x Screw Clamp (compatible with: Inline Slate Vent \ Small Inline Slate Vent).Relevant standards:BS 5250: 2021 Management of moisture in buildings – Code of practiceManufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant Building Regulations 2010Satisfies all NHBC requirements Pipe sleeves

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: 1201 Telescopic Underfloor Vent
To provide ventilation below suspended ground floors.Features and benefits:.Telescopic and adjustable for a step of 3, 4 or 5 brick courses.Horizontal and vertical extension accessories available.Free area of 8000 mm² per unit when installed without 1201AB airbrick.Free area of 6500 mm² per unit when installed with 1201AB airbrick.Equivalent area of 6170 mm² per unit when installed with 1201AB airbrick.Special grille included to prevent entry of vermin.Durable, robust and totally resistant to decay.Quality:Satisfies all NHBC requirementsManufactured to BS EN ISO 9001 and BS EN ISO 14001Complies with all relevant Building RegulationsMeets all relevant British Standards Airbricks

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: 1201XL Telescopic Underfloor Vent
Adjustable ventilator for ground floors up to seven brick courses.Features and benefits:Telescopic and adjustable for a step of 5, 6 or 7 brick courses.Horizontal and vertical extension accessories available.Free area of 8000 mm² per unit when installed without airbrick.Free area of 6500 mm² per unit when installed with 1201AB airbrick.Equivalent area of 6170 mm² per unit when installed with 1201AB airbrick.Special grille included to prevent entry of vermin.Durable, robust and totally resistant to decay.Quality:Satisfies all NHBC requirementsManufactured to BS EN ISO 9001 and BS EN ISO 14001Complies with all relevant Building RegulationsMeets all relevant British Standards Airbricks

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Adapt-Air - Airbrick
The ducting to airbrick adapter kit is delivered pre-assembled, ready to fit straight out of the box – it saves time, reduces costs and minimises the need for external fitters, core drilling and specialist tools, when connecting to an internal fan to duct through to an external wall. Adapt-Air has been designed to be built in as part of the brickwork package and terminates at an external airbrick, removing the need to use unsightly gravity flap vents and avoiding re-works of cutting a hole through brickwork.Features and benefits:Enables rigid extraction ductwork termination to be built in as part of the brickwork package.Doesn’t restrict or interrupt ducting airflow.Convenient ‘1 product code’ assembled kits for immediate installation.Eliminates the requirement for retrospective through wall core drilling.Enables 1st fix ceiling & wall duct extraction and wall connections to outlet vent.Durable and totally resistant to decay.Airbricks available in terracotta and bu to blend with various brick types (other colours available on request).Suitable for working temperatures of -20 to 60°C.Installation:Build in the set’s airbrick (to replace a regular brick) as normal as brick and blockwork proceeds.The installed position and level of the set is determined by the extraction fan connections.The set can be flush or project beyond the inner wall leaf to allow for the fitting of additional ducting or an extraction fan.The cavity wall construction will determine most suitable option length kit required.As with all through cavity wall components install a DPC cavity tray, with wall weep and stop ends, above the installed adapter set to collect any water ingress. – We recommend the Inter-loc 4 horizontal cavity tray and 1143 or Invisiweep, the almost invisible wall weep.Timber/Steel frame wall construction may require cavity barriers or intumescent collars.Quality:Helping to meet Building Regulation Part FEquivalent area marking to front face of airbrick to comply with BS EN 13141-1Manufactured to BS EN ISO 9001 Airbricks

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Airbrick
Effective airbrick ventilator available in a range of colours.Features and benefits:Equivalent area of 6170 mm² per air brick.Exclusive stepped front grille greatly reduces the entry of wind driven rain.6.5 mm-wide front grille openings comply with BS 5440 Pt 2 and British Gas requirements.Integral clip together facility allows multiple airbricks to be stacked to form 9” x 6” and 9” x 9” sizes.Available in a range of colours to blend in with various brick types.Very tough and robust.Durable and totally resistant to decay.Quality:Satisfies all NHBC requirementsManufactured to BS EN ISO 9001 and BS EN ISO 14001Complies with all relevant Building RegulationsMeets all relevant British StandardsEquivalent area marking to front face of airbrick to comply with BS EN 13141-1 : 2004 Airbricks

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Castellated Roof Tile Vent
Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and BenefitsSuitable for roofs with a minimum pitch of 20°.Free ventilation area of 10,000 mm².Sized to replace one Castellated tile to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Integrated clips to ensure a secure fit to surrounding roof tiles.UV stabilized top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings - Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding - code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Cavity Wall Weep Vent
Multi-function product for discharging water from external walls and cavity ventilation.Features and benefits:Purpose-made and pre-formed to guarantee reliable discharge of water.Less prone to inadvertent pointing-up than weep holes formed by simply leaving the perp. joint open.Integral front grille prevents entry of large nest building insects into the cavity.Range of colours to blend with brick or mortar colour: Terracotta, Buff, Brown, Clear, White, Grey, Black or Blue Black.Longer lengths built up with extension pieces. Individual extension pieces (1144) can be clipped together to create a longer extension.Airflow: 165 mm² free area per unit (1143 weep vent only).Quality:Satisfies all NHBC requirements.Manufactured to BS EN ISO 9001 and BS EN ISO 14001.Complies with all relevant Building Regulations.Meets all relevant British Standards. Perpend joint plastics weepholes

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Double Pantile Roof Tile Vent
Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and benefits:Suitable for roofs with a minimum pitch of 20°.Free ventilation area of 10,000 mm².Sized to replace one Double Pantile tile to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Integrated clips to ensure a secure fit to surrounding roof tiles.UV stabilized top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Double Roman Roof Tile Vent
Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and BenefitsSuitable for roofs with a minimum pitch of 20°.Free ventilation area of 10,000 mm².Sized to replace one Double Roman tile to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Integrated clips to ensure a secure fit to surrounding roof tiles.UV stabilized top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Fire Rated Metal Loft Doors
High-performance metal loft access doors with one-hour fire protection.Features and benefits:Purpose-made product with proven performance.Superior to site fabricated panels.Provides up to 60 minutes' fire protection.Excellent aesthetic appearance and factory finished.Maintenance free, no need to paint.Allows the use of a telescopic ladder if required.Incorporates secure twist operated catch assembly.Acoustic performance of 29 dB.U-value 0.82 W/m²k and 0.35 W/m²K options available.Budget lock and key lock options available.All loft doors are hinged on the short side except the 900 x 600 mm and 1200 x 600 mm sizes which are hinged on the long side.Quality:Independently fire tested.Complies with Building Regulations document L1A and L2A (2013 edition).Meets all relevant British Standards and NHBC requirements. Carbon steel access hatches

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Fire Rated Metal Loft Doors
High-performance metal loft access doors with one-hour fire protection.Features and benefits:Purpose-made product with proven performance.Superior to site fabricated panels.Provides up to 60 minutes' fire protection.Excellent aesthetic appearance and factory finished.Maintenance free, no need to paint.Allows the use of a telescopic ladder if required.Incorporates secure twist operated catch assembly.Acoustic performance of 29 dB.U-value 0.82 W/m²k and 0.35 W/m²K options available.Budget lock and key lock options available.All loft doors are hinged on the short side except the 900 x 600 mm and 1200 x 600 mm sizes which are hinged on the long side.Quality:Independently fire tested.Complies with Building Regulations document L1A and L2A (2013 edition).Meets all relevant British Standards and NHBC requirements. Carbon steel access hatches

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Flat Edge Roof Tile Vent
Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and BenefitsSuitable for roofs with a minimum pitch of 20°.Free ventilation area of 10,000 mm².Sized to replace one Flat Edge tile to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Integrated clips to ensure a secure fit to surrounding roof tiles.UV stabilized top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: FRSTOP Fire-Rated Cavity Stop Sock
Fire-rated thermal and acoustic cavity stop sock.Features and benefits:FRstop cavity stop socks are lengths of low resin, non-combustible, rockfibre mineral wool sleeved in 35 µm polythene for on-site weather protection.One-hour fire integrity and minimum 15-minute insulation.Polythene encapsulated cavity stop sock.Available in standard widths of 50, 75, 85, 90, 100, 115, 125 and 150 mm.Also available to suit cavity widths of up to 300 mm.Special cavity widths are available on request up to 300 mm.Meets the requirements of the Robust Detail, Approved Document B and NHBC Standards.Quality:Satisfies all NHBC requirements.Complies with Building Regulations Approved Document B.Meets all relevant British Standards.Independently tested by WarringtonfireMeets the requirements of the Robust Details. Mineral wool fire-stopping

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Hooded Slate Vent
Hooded Slate Vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and benefits:Enables ventilation directly into a roof space.Suitable on roofs with natural or synthetic slates with a minimum pitch of 22.5°.Maximum free ventilation area of 22,000 mm².Sized to replace one slate to provide a continuous visual appearance along the roof when viewed at all levels.The flat base of the vent means there is no need to cut roofing battens unless using the vent with a ducted system.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.Can be connected to ventilation duct or soil vent pipe of various sizes with the optional RTV-ADHS duct adapter.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Lightweight and easy to handle.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Hooded Slate Vent Adapter
Stepped duct adapter for the Timloc Hooded Slate Vent.Features and benefits:Compatible with the Timloc Hooded Slate Vent.Simply click into position to secure the adapter to the tile vent.The joint between the adapter and the slate vent must be fully sealed with silicon sealant or a similar watertight adhesive.Provides a precise fit to 110/125/150/170 mm ventilation duct or soil vent pipe.Simply cut along the indented line at your chosen duct size. No cutting is required for 110 mm size.Where required, the roof battens may need to be trimmed to allow the adapter to pass through the roof surface into the property.Relevant standards:BS 5250: 2021 Management of moisture in buildings – Code of practiceManufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant Building Regulations 2010Satisfies all NHBC requirements Ventilation ducts

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Inline Slate Vent
Inline slate vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and BenefitsSuitable for roofs with a minimum pitch of 22.5°.Free ventilation area of 9,450 mm².Sized to replace one slate to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.Provides a 110 mm duct connection as standard with the optional RTV-ADIS duct adapter.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Inline Slate Vent Adapter
110 mm duct adapter for the Timloc inline slate vent.Features and benefits:Compatible with the Timloc Inline Slate Vent and Small Inline Slate Vent.Simply click into position to secure the adapter to spigot of the tile vent.Provides a precise fit to 110 mm duct or soil vent pipe. Adapter sits below the roof batten to provide a simple, neat installation.Relevant standards:BS 5250: 2021 Management of moisture in buildings – Code of practiceManufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant Building Regulations 2010Satisfies all NHBC requirements Ventilation ducts

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Interlocking Plain Roof Tile Vent
Interlocking plain roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and benefits:Suitable for roofs with a minimum pitch of 22.5°.Free ventilation area of 6,000 mm².Sized to replace one Interlocking Plain tile to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.UV stabilized top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards: Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Invisiweep NC - Non-combustible Wall Weep
Non-combustible wall weep for discharging water from external walls.Features and benefits:High-pressure diecast in A1 non-combustible metal protected by an electroplated coating.Classified as A1, non-combustible, no contribution to fire without the need for testing according to European Commission paper 96/603/EC and BS EN 13501-1:2018.Integral 4 mm vermin barrier and rainwater baffle as recommended to reduce ingress of large nest building insects, mammals and rainwater penetration to the cavity.External ribs and tapered profile, to key into mortar for secured fixing.Full height upstand to cavity side, to maintain drainage and minimize the impact on blockage from cavity cement build-up.Discrete water outlet, to minimize the impact and reduce visibility for a truly concealed wall weep.Venturi-effect outlet tube to reduce pressure, allowing for optimal water drainage.Standard version available (specified separately).QualityMeets British standards; BS5250, BS8000, BS5628, BS8215Satisfies all NHBC requirementsComplies with all relevant Building Regulations Perpend joint plastics weepholes

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Invisiweep Wall Weep
Wall weep for discharging water from external walls.Features and benefits:Integral 4 mm vermin barrier and rainwater baffle as recommended by BS 5250, to reduce ingress of large nest building insects, mammals and rainwater penetration to the cavity.External ribs and tapered profile, to key into mortar for secured fixing.Full-height upstand to cavity side, to maintain drainage and minimize the impact on blockage from cavity cement build-up.Discrete water outlet, to minimize the impact and reduce visibility for a truly concealed wall weep.Venturi-effect outlet tube to reduce pressure, allowing for optimal water drainage.Extension tube available for wide walls and render.Supplied in packs of 50 as standard; packs of 200 available on request.Non-combustible version available (specified separately).Quality: Manufactured to BS EN ISO 9001 and BS EN ISO 14001Meets British standards; BS5250, BS8000, BS5628, BS8215Satisfies all NHBC requirementsComplies with all relevant Building Regulations Perpend joint plastics weepholes

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Mini Castellated Roof Tile Vent
Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and benefits:Suitable for roofs with a minimum pitch of 17.5°.Free ventilation area of 5,000 mm².Sized to replace one Mini Castellated tile to provide a continuous visual appearance along the roof when viewed at all levels.Provides a 110 mm duct connection as standard.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Integrated clips to ensure a secure fit to surrounding roof tiles.UV stabilized top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant StandardsIndependently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Multi Stepped Duct Adapter
Duct adapter for converting to different size ductwork during installation.Features and benefits:Provides a precise fit to 110 mm duct or soil vent pipe. Trim along the indented edges to configure the duct size.Provides a precise fit to 100/110/125/150 mm duct.110 mm outside diameter fits directly to Timloc tile vent spigots.Compatible with flexible, semi-rigid and rigid duct.Can be secured with adjustable screw clamps, zip ties or glued/screwed.Connects Timloc roof tile vents to different sizes of ventilation duct.Relevant standards:BS 5250: 2021 Management of moisture in buildings – Code of practiceManufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant Building Regulations 2010Satisfies all NHBC requirements Ventilation ducts

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Non-Profile Roof Tile Vent
Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and benefits:Suitable for roofs with a minimum pitch of 20°.Free ventilation area of 10,000 mm².Sized to replace one Non-Profile tile to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Integrated clips to ensure a secure fit to surrounding roof tiles.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Plain Roof Tile Vent
Plain roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and benefits:Suitable for roofs with a minimum pitch of 35°.Free ventilation area of 7,000mm².Sized to replace three plain tiles to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.UV stabilised top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Plain Roof Tile Vent Adapter
Duct adapter for Timloc plain and interlocking plain inline roof tile vents.Features and benefits:Compatible with Timloc Plain Inline Roof Tile Vents Plain Roof Tile Vent / Interlocking Plain Roof Tile Vent / Low Profile Plain Tile Vent / SLIP Plain Roof Tile Vent without reducing the free vent area of the system.Simply click into position to secure the adapter to base of the tile vent.Provides a precise fit to 110 mm duct or Soil Vent Pipe. Duct can be secured to the adapter with adjustable screw clamps, zip ties or glued/screwed.Relevant standards:BS 5250: 2021 Management of moisture in buildings – Code of practiceManufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant Building Regulations 2010Satisfies all NHBC requirements Ventilation ducts

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Plastic Hinged Drop Down Loft Access Doors
Hinged loft doors with lockable options.Features and benefits:Air permeability measured at 50 Pa as 0.00 m³ (h·m²) under positive pressure test conditions.Purpose-made product saves time and money compared with traditional joiner-made timber loft access doors.Independently air leakage tested by BRE.Excellent aesthetic appearance.Factory finished and ready to fit straight from the box.Insulated door panel with integral draught/vapour seal.Maintenance free, no need to paint.Hinged design allows use of a telescopic loft ladder.Acoustic performance of 30dB.Secure key-operated lock option available.Quality:Satisfies all NHBC requirements.Manufactured to BS EN ISO 9001 and BS EN ISO 14001.Complies with Building Reg. document L1A and L2A (2013 edition).Meets all relevant British Standards. Access panels

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Rad-Seal 15 Face-Fix Radiator Pipe Guide & Seal - Radiator Pipe Guide
Face-fix radiator pipe guide and seal designed to eliminate potential air leakage and heat loss at vulnerable through-wall radiator pipework entry points.Features and benefits:Contributes to Part L’s required air leakage performance.Protects the pipework and plaster from direct chafing.Straight-forward and quick face fix installation.Projects by just 23.5 mm from the wall.Securely positions the pipework into the required direction for connection.Eliminates pipework kinking.Patent-pending design.Quality:Manufactured to BS EN ISO 9001 and BS EN ISO 14001.Helps to meet Building Regulation Document Part L - Conservation of Fuel and Power. Radiator pipe seals

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Rad-Seal Recessed Radiator Pipe Guide & Seal
Recessed radiator pipe guide and seal designed to eliminate potential air leakage and heat loss at vulnerable through wall radiator pipe work entry points.Features and benefits:Contributes to Part L’s required air leakage performance.Air permeability measured and verified by BRE at Part L’s 50 Pa as:0.24 m³ (h·m²) under positive pressure test conditions.0.30 m³ (h·m²) under negative pressure test conditions.Centrally and neatly contains the pipework during the plastering process.Protects the pipework and plaster from direct chafing.Replaces the requirement of electrical back boxes, intumescent foams or sealants.Straight forward and quick face fix installation.Projects by just 5 mm from the wall.Securely positions the pipework into the required direction for connection.Eliminates pipework kinking.Quality:Manufactured to BS EN ISO 9001 and BS EN ISO 14001.Helping to meet Building Regulation:Document Part L – Conservation of Fuel and Power Wall collars

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Radon Sump
For use when a sub floor depressurisation is required under full radon protection.Features & benefits:Compatible with 110mm drainage pipes.Single piece moulding eliminates the need for on-site fabrication preventing errors through poor workmanship.Easy to handle and position.Tough, durable and puncture resistant.Spigot ends can be cut along the indented lines as required to provide extra pipe connections.Two or more sumps can be connected with pipework to provide more capacity for larger or more complex groundwork sites with multiple compartments.Quality: Satisfies all NHBC requirements.Manufactured to BS EN ISO 9001 and BS EN ISO 14001.Complies with all relevant Building Regulations.Meets all relevant British Standards.UK Design Registration Number 6185786. Depressurization sumps

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Single Pantile Roof Tile Vent
Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and BenefitsSuitable for roofs with a minimum pitch of 20°.Free ventilation area of 5,000 mm².Sized to replace one Single Pantile tile to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.Provides a 110 mm duct connection as standard.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Integrated clips to ensure a secure fit to surrounding roof tiles.UV stabilized top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Small Inline Slate
Small inline slate vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and BenefitsEnables ventilation directly into a roof space.Suitable on roofs with natural or synthetic slates with a minimum pitch of 22.5°.Free ventilation area of 9450 mm².Sized to replace one slate to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.Provides a 110 mm duct connection with the optional RTV-ADIS duct adapter.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Lightweight and easy to handle.Can also be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Standard Roof Tile Vent Adapter
Duct adapter for Timloc large format inline roof tile vents.Features and benefits:Compatible with all Timloc large format inline roof tile vents Castellated Roof Tile Vent / Double Pantile Roof Tile Vent / Double Roman Roof Tile Vent / Thin Leading Edge Roof Tile Vent / Flat Edge Roof Tile Vent / Non-Profile Roof Tile Vent.The adapter reduce the maximum free vent are of the system from 10,000 mm² to 8,600 mm².Simply click into position to secure the adapter to base of the tile vent. Provides a precise fit to 110 mm duct or Soil Vent Pipe. Duct can be secured to the adapter with adjustable screw. clamps, zip ties or glued/screwed.Relevant standards:BS 5250: 2021 Management of moisture in buildings – Code of practiceManufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant Building Regulations 2010Satisfies all NHBC requirements Ventilation ducts

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Thermo-Loc FR30 30-Minute Fire Rated Cavity Closers
30-minute fire-rated barriers for eliminating damp and cold bridging around doors, windows and sills.Features and benefits:Provides an effective DPC and thermal barrier between frame, inner and outer wall leaf.Thermal conductivity of 0.036 W/m·K.Exceeds the minimum thermal resistance path of 0.45 m²K/W stipulated in ‘Part L’ accredited construction details.Rigid profile extrusion allows both first and second fix.Suitable for all frame and sill positions.Durable and resistant to decay.Insulation option to suit your requirements both thermal and fire rated.Global warming potential (GWP) of zero.Ozone depletion potential (ODP) of zero.Available fully rebated - Check reveal (single flange).Quality:BBA approvedIndependently tested by Warringtonfire.Satisfies NHBC Standards.Manufactured to BS EN ISO 9001 and BS EN ISO 14001.Complies with Building Regulation Approved Documents C, B, L1 & L2.Complies with ‘Part L’ accredited construction details.Complies with the Scottish Building Standards ‘Technical handbook’.Satisfies BRE document ‘Thermal insulation: avoiding risks’.Meets all relevant British Standards. Plastics cavity closers

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Thermo-Loc FR60 60-Minute Fire Rated Cavity Closers
60-minute fire-rated barriers for eliminating damp and cold bridging around doors, windows and sills.Features and benefits:Provides an effective DPC and thermal barrier between frame, inner and outer wall leaf.Thermal conductivity of 0.036 W/m·K.Exceeds the minimum thermal resistance path of 0.45 m²K/W stipulated in ‘Part L’ accredited construction details.Rigid profile extrusion allows both first and second fix.Suitable for all frame and sill positions.Durable and resistant to decay.Insulation option to suit your requirements both thermal and fire rated.Global warming potential (GWP) of zero.Ozone depletion potential (ODP) of zero.Available fully rebated - Check reveal (single flange).Quality:BBA approved.Independently tested by Warringtonfire.Satisfies NHBC Standards.Manufactured to BS EN ISO 9001 and BS EN ISO 14001.Complies with Building Regulation Approved Documents C, B, L1 and L2.Complies with ‘Part L’ accredited construction details.Complies with the Scottish Building Standards ‘Technical handbook’.Satisfies BRE document ‘Thermal insulation: avoiding risks’.Meets all relevant British Standards. Plastics cavity closers

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Thin Leading Edge Roof Tile Vent
Profiled roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and benefits:Suitable for roofs with a minimum pitch of 20°.Free ventilation area of 10,000 mm².Sized to replace one Thin Leading Edge tile to provide a continuous visual appearance along the roof when viewed at all levels.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.Integrated clips to ensure a secure fit to surrounding roof tiles.UV stabilized top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Universal Hooded Slate Vent
Universal hooded slate ventilator for new build and existing roof applications.Features and benefits:Free vent area of 10 000 mm².Suits slate sizes 600 x 300 mm or 500 x 250 mm.Inconspicuous low hood design.Can be combined with pipe adaptor kit to enable connection of 100 mm soil vent pipe and/ or mechanical extractor.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Soffit grilles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Universal Roof Tile Vent
Universal roof tile vent to enable ventilation directly into a roof space or connect to a ducted ventilation system.Features and benefits:Suitable for roofs with a minimum pitch of 12.5°.Max free ventilation area of 20,000 mm2 when cut at 170 mm diameter.Max free ventilation area of 16,000 mm2 when cut at 150 diameter.Max free ventilation area of 11,000 mm2 when cut at 125 diameter.Max free ventilation area of 8,400 mm2 when cut at 110 mm diameter.Designed to provide ventilation through all types and profiles of tile or slate.Integrated lead alternative flashing provides a customizable fit.Shaped to manage and channel rainwater back down onto the roof tiles and away from the vent opening.4 mm spaced external grille to prevent rainwater ingress and keep out large insects, vermin and debris.UV stabilized top for continuous exposure to sunlight.Lightweight and easy to handle.Enables ventilation directly into a roof space.Can be connected to a ducted ventilation system inside the building.Relevant standards:Independently tested by BRE for deluge and wind driven rain to PD CEN/TR15601:2012BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - product specifications (+A1:2017)BS 5250: 2021 Management of moisture in buildings – Code of practiceBS 5534:2014 Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)Manufactured to BS EN ISO 9001:2015 and BS EN ISO 14001:2015Complies with all relevant sections of the Building Regulations 2010Satisfies all relevant NHBC requirements Roof slope ventilator tiles

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Unleaded Everdry Stepped Cavity Trays for Stonework
Stepped cavity tray system for multi-cavity options in stone wall construction of 150 mm course heights.Features and benefits:150 mm high back upstand exceeds minimum requirements.Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework.Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required.Choice of three lengths:450 mm for roof pitches of 25° or above;625 mm for roof pitches of 17.5–22.5°;1250 mm for roof pitches of 7.5–15°.Can be specified separately with a pre-applied polystyrene strip mortar barrier.Leaded version also available, consult manufacturer for details.Quality:BBA approved.Satisfies all NHBC requirements.Manufactured to BS EN ISO 9001 and BS EN ISO 14001.Complies with all relevant Building Regulations.Meets all relevant British Standards. Preformed cavity trays

Published [30/03/2026]

TIMLOC BUILDING PRODUCTS: Z-Series Metal Access Panels
Metal access panels for access to mechanical, electrical and other building services.Features and benefits:Purpose-made product; saves time and money compared with traditional joiner–made access doors.Excellent aesthetic appearance and finish.Flush fitting door panels.Visible picture frame surround smartly conceals cut-out edges and contributes to a faster installation.Smooth and enduring polyester powder coated finish.Can be painted.Quick and straight forward to install.50 mm-deep frame for deeper wall and ceiling fixing.Hinged door panel with budget lock.Quality:Helps to meet Building Regulation Document Part J – Concealed Flues in Voids (2010 edition) Access panels

Published [30/03/2026]