NAYLOR CONCRETE PRODUCTS LTD
WHALEY ROAD
BARUGH GREEN
BARNSLEY
SOUTH YORKSHIRE S75 1HT
Tel: 01226 320810
Fax: concrete@naylor.co.uk
These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire R11 [60 minutes] - Lintels
Faced Fire-Spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire R13 [60 minutes] - Lintels
Faced Fire-Spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Features and benefits:Design complies with EN 1992-1-2.Manufactured in accordance with BS EN 845-2: 2003.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire R14 [60 minutes] - Lintels
Faced Fire-Spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.Features and benefits:Manufactured in accordance with BS EN 845-2: 2003.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire R190 [60 minutes] - Lintels
Faced Fire-Spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.Features and benefits:Pre-stressed lintels ensuring optimum performance with enhanced fire resistance and a smooth, consistent colour finish.Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire R2 [60 minutes] - Lintels
Faced fire-spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Features and benefits:Pre-stressed lintels ensure optimum performance with enhanced fire resistance and a smooth, consistent colour finish.Materials comply with BS EN 206 and BS 8500.The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire R3 [60 minutes] - Lintels
Faced Fire-Spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire R7 [60 minutes] - Lintels
Faced Fire-Spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire R8 [60 minutes] - Lintels
Faced Fire-Spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire S5 [60 minutes] - Lintels
Faced Fire-Spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than our standard range and our technical team with their special knowledge of concrete can advise you on which sections would achieve a specific fire resistance and strength rating and offer a design solution should this not be detailed in our load span tables.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2..
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced Fire S8 [60 minutes] - Lintels
Faced Fire-Spec Lintels have a class C fair faced finish and are available with 60, 90 or 120 minutes fire rating, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range and the Naylor technical team, with their special knowledge of concrete, can advise you on which sections would achieve a specific fire resistance and strength rating, and offer a design solution should this not be detailed in the load span tables.Features and benefits:Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R11 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R12 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R13 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R14 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R190 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R2 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500.The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R3 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R6 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R7 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R8 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500.The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced R9 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:Design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced S4 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced S5 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 14 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Faced S8 - Lintels
All High-Spec units are prestressed to ensure optimum performance and come with 30 minutes fire rating as standard. Available in lengths up to 4800 mm on certain sections sizes. Available in a Hi-Spec Finish, for use normally in plastered situations, or Faced Finish, for use in exposed or painted situations.Features and benefits:Design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire R11 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Fair Faced Fire-Spec range:Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire R13 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Fair Faced Fire-Spec range:Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire R14 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Fair Faced Fire-Spec range:Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120-minute fire rating.Features and benefits:The design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire-rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire R190 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Fair Faced Fire-Spec range:Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120-minute fire rating.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire R2 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should they not be detailed in the load span tables.Features and benefits:Materials comply with BS EN 206 and BS 8500.The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.Fire rated lintels meet the Building Regs requirement for protection of structural elements of concrete. They are designed to buy time for occupants to exit the building and Fire services to deal with the fire. Both protecting the building and occupants.Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire R3 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Fair Faced Fire-Spec range:Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire R7 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Fair Faced Fire-Spec range:Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire R8 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Fair Faced Fire-Spec range:Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire S5 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Fair Faced Fire-Spec range:Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Fire S8 [60 minutes] - Lintels
Fire-Spec is a range of ex-steel mould finish high performance units, available in 60, 90 and 120 minutes, dependent upon the section width. Other concrete sections can be made with a fire resistance equal to or greater than the standard range. The Naylor technical team, with their special knowledge of concrete, can advise which sections would achieve a specific fire resistance and strength rating and offer a design solution, should this not be detailed in the load span tables.Fair Faced Fire-Spec range:Fair Faced Fire-Spec lintels are also available in a class C fair faced finish and again with a 60, 90 and 120 minute fire rating.Features and benefits:Design complies with EN 1992-1-2.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.All fire-rated lintels produced by Naylor Lintels comply with EN 1992-1-2.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R11 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 18 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R12 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. Hi-Spec lintels are available in 18 different sections sizes, with lengths up to 4800 mm on certain sections sizes. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R13 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. R13 lintels are available in 14 different sections sizes, with lengths up to 4800 mm. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R14 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. R14 lintels are available in 14 different sections sizes, with lengths up to 4800 mm. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500. The pre-stressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R190 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. R190 lintels are available in 14 different sections sizes, with lengths up to 4800 mm. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R2 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. R2 lintels are available in 14 different sections sizes, with lengths up to 3900 mm. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500.The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R3 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. R3 lintels are available in 14 different sections sizes, with lengths up to 3600 mm.Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R6 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. R6 lintels are available in 14 different sections sizes, with lengths up to 3600 mm. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R7 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. R7 lintels are available in 14 different sections sizes, with lengths up to 3900 mm. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R8 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. R8 lintels are available in 14 different sections sizes, with lengths up to 4800 mm. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: R9 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. R9 lintels are available in 14 different sections sizes, with lengths up to 4800 mm. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:Design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500. The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: S4 - Lintels - Fire-rated Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes' fire rating as standard. S4 lintels are available in ten different lengths up to 3000 mm. Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500.The pre-stressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: S5 - Lintels
All Hi-Spec lintels are pre-stressed to ensure optimum performance and come with 30 minutes fire rating as standard. S5 lintels are available in 14 different sections sizes, with lengths up to 3900 mm.Due to additives and concrete strength, these units are suitable for use below ground.Features and benefits:The design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500.The prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: S8 - Lintels
All High-Spec units are prestressed to ensure optimum performance and come with 30 minutes fire rating as standard. Available in lengths up to 4800 mm on certain sections sizes.Features and benefits:Design complies with EN 1992-1-1.Materials comply with BS EN 206 and BS 8500.The prestressing wire complies with BS 5896.Available in a Hi-Spec Finish, for use normally in plastered situations, or Faced Finish, for use in exposed or painted situations.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Xtrafire XFR6 - Fire-rated Concrete Lintel
Lintels are 100 mm-wide pre-stressed concrete lintels with a R60, 90, 120 and 180-minute fire rating. Xtrafire lintels are a single cast product with no additional coating and can easily be fixed into on site. They are more durable and have greener credentials than other lintels.Features and benefits:Design is based on performance-based testing.Materials comply with BS EN 206 and BS 8500.The pre-stressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Xtrafire XFR8 - Fire rated concrete lintel
The Xtrafire XFR8 Lintels are 140 mm wide pre-stressed concrete lintels with a 240-minute fire rating. Pre-stressed innovative lintels ensuring optimum performance with enhanced fire resistance. Features and benefits:The design complies with BS EN 1992-1-1.Materials comply with BS EN 206 and BS 8500.The pre-stressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Xtrafire XFR9 - Fire-rated Concrete Lintel
Lintels are 100 mm-wide pre-stressed concrete lintels with a R60, 90, 120, 180 and 240-minute fire rating. Xtrafire lintels are a single cast product with no additional coating and can easily be fixed into on site. They are more durable and have greener credentials than other lintels.Features and benefits:Design is based on performance-based testingMaterials comply with BS EN 206 and BS 8500.The pre-stressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Xtrafire XFS5 - Fire rated concrete lintel
Xtrafire XFS5 Lintels are 140 mm wide prestressed concrete lintels with a fire rating of 240 minutes. Xtrafire lintels are a single cast product with no additional coating and can be fixed into on site.Features and benefits:Performance based testing.Materials comply with BS EN 206 and BS 8500.Prestressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]
NAYLOR CONCRETE PRODUCTS LTD: Xtrafire XFS8 - Fire rated lintel
The XFS8 Lintels are 215 mm wide pre-stressed concrete lintels with a 240-minute fire rating. Features and benefits:The design complies with BS 8110 table 4.3, section 2.Materials comply with BS EN 206 and BS 8500.The pre-stressing wire complies with BS 5896.
Prestressed concrete lintels
Published [04/04/2024]