ICB GROUP

UNIT 9-11
FLEETS INDUSTRIAL ESTATE
WILLIS ROAD
POOLE
DORSET BH15 3SU

Tel: 01202 785200
Fax: sales@icbwaterproofing.co.uk

Company Logo

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

ICB GROUP: Alwitra Evalon V Single Ply Fully Adhered – Cold Roof
Bitumen compatible EVA-roofing membrane system, with effective homogeneous sealing thicknesses (1.2 mm / 1.5 mm) and polyester fleece-backing, produced in different colours. Meets the requirements EN 13956. CE marked.Features and benefits:Bitumen-free and solvent-free.UV Stable.Root-resistant.Fire load five times lower than a built-up felt roof.Quick and easy to install.Bitumen compatible.Superior heat reflection.Suitable for any roof geometry.Approved for Green Roofs (Roof-Resistant).Available in a range of colours.FPC CERTIFICATE NO: 1343 - BPR - 06-1432BBA accredited (BBA 23/6878).BREEAM accredited.CE marked.System Includes:Evalon® V Superior Single-Ply WaterproofingHA AdhesiveDeck by others Single layer sheet cold roof covering systems

Published [30/03/2026]

ICB GROUP: Alwitra Evalon V Single Ply Fully Adhered – Warm Roof
Bitumen compatible EVA-roofing membrane system, with effective homogeneous sealing thicknesses (1.2 mm / 1.5 mm) and polyester fleece-backing, produced in different colours. Meets the requirements EN 13956. CE marked.Features and benefits:Bitumen-free and solvent-free.UV Stable.Root-resistant.Fire load five times lower than a built-up felt roof.Quick and easy to install.Bitumen compatible.Superior heat reflection.Suitable for any roof geometry.Approved for Green Roofs (Roof-Resistant).Available in a range of colours.FPC CERTIFICATE NO: 1343 - BPR - 06-1432BBA accredited (BBA 23/6878).BREEAM accredited.CE marked.System Includes:Evalon® V Superior Single-Ply WaterproofingHA AdhesiveEvatherm A rigid polyisocyanurate (PIR) insulationInstastik AdhesiveStratavap Air & Vapour Control layerEvaprime SADeck by others Single layer sheet warm roof covering systems

Published [30/03/2026]

ICB GROUP: Alwitra Evalon VSK Single Ply Self Adhesive – Cold Roof
Bitumen compatible EVA-roofing membrane system, with effective homogeneous sealing thicknesses (1.2 mm / 1.5 mm) and polyester fleece-backing, produced in different colours. Meets the requirements EN 13956.Features and benefits:Self-adhesive underside coating.Bitumen-free and solvent-free.Root-resistant.High adhesive strength.Quick and easy to install.Bitumen compatible.Superior heat reflection.Suitable for any roof geometry.Approved for Green Roofs (Roof-Resistant).Available in a range of coloursFPC CERTIFICATE NO: 1343 - BPR - 06-1432.BREEAM accredited.CE marked.System Includes:Evalon® VSK Superior Single-Ply Waterproofingalwitra Primer SK-LDeck by others Single layer sheet cold roof covering systems

Published [30/03/2026]

ICB GROUP: Alwitra Evalon VSK Single Ply Self Adhesive – Warm Roof
Bitumen compatible EVA-roofing membrane system, with effective homogeneous sealing thicknesses (1.2 mm / 1.5 mm) and polyester fleece-backing, produced in different colours. Meets the requirements EN 13956.Features and benefits:Self-adhesive underside coating.Bitumen-free and solvent-free.Root-resistant.High adhesive strength.Quick and easy to install.Bitumen compatible.Superior heat reflection.Suitable for any roof geometry.Approved for Green Roofs (Roof-Resistant).Available in a range of coloursFPC CERTIFICATE NO: 1343 - BPR - 06-1432.BREEAM accredited.CE marked.System Includes:Evalon® VSK Superior Single-Ply Waterproofingalwitra Primer SK-LEvatherm A rigid polyisocyanurate (PIR) insulationInstastik AdhesiveStratavap Air & Vapour Control layerEvaprime SADeck by others Single layer sheet warm roof covering systems

Published [30/03/2026]

ICB GROUP: Extensive Green Roof Systems - Wildflower Green Roof
Extensive green roof system with sedum or wildflowers and grass.Once established Extensive green roofs require little maintenance.Comprises:HPS 2.5 protection fleece;FCP20 drainage and filter layer;Extensive green roof substrate OR Wildflower substrate;Sedum blanket OR wildflower blanket.HPS 2.5 protection fleece:Thick, needle-punched nonwoven geotextile manufactured from 100% virgin polypropylene high tenacity fibres containing 1% active carbon black.Optimized for maximum strength and performance – not mass.Available in wide widths to allow for minimal construction costs – up to 6 m.Manufactured from a unique blend of high tenacity fibres providing class-leading durability • 100% virgin polypropylene fibres for guaranteed durability.Carbon black for UV stability.FCP20 Cuspate Geocomposite:20 mm, HDPE, punched, cuspated drainage board with a geotextile filter/ separator bonded to a single side.Designed to provide an irrigation and drainage system for green roofs.Extensive Sedum substrate:Greenwaste compost 80%Crushed mineral fines 20%Slow release organic based fertiliser with additional micro-nutrients.Sedum blanket:SPECIES - (8-12 VARIETIES PER BLANKET – DEPENDENT ON SEASONAL AVAILABILITY)SA 328 Sedum albumSA 352 Sedum hybridumSA 348 Sedum floriferumSA 368 Sedum ellacombianumSA 369 Sedum selskianum trueSA 359 Sedum pulchellumSA 364 Sedum reflexumSA353 Sedum middendorfianumSA 355 Sedum montanumSA 354 Sedum montanum orientaleSA 371 Sedum sexangulareSA 320 Sedum acreSA 376 Sedum spurium ‘CoccineumWildflower Substate:SOIL-LESS SUBSTRATE• This product is an inert, sterile composted green waste based medium• It contains a pH modifier, a wetting agent, its free draining, low levels of organic nutrients• Its light, friable and easy to use for both manual and mechanical installationsWildflower turf:The turf is made up of UK native and naturalised wildflowers and grasses, with a minimum of 75% wildflowers. Extensive green roof systems

Published [30/03/2026]

ICB GROUP: Fleet PMMA Liquid Applied Balcony/ Walkway System
Fleet Coat 30 products are high-grade, PMMA-based waterproofing resins with low-temperature flexibility and are used to create durable and reliable roof waterproofing membranes and to waterproof joints on water impermeable concrete with fleece reinforcement. Its liquid application allows seamless waterproofing systems to be applied to large areas, and even the most complex roof penetrations and details to be securely incorporated.Fleet Junction:A variant of Fleet Coat 30 which is made more viscous/ thixotropic to reduce run-off when applied to sloping and vertical surfaces. It is therefore used primarily for the waterproofing of details.Features and benefits:Highly flexible and crack-bridging even at extreme sub-zero temperatures.Permanently weather-resistant (UV-, hydrolysis- and alkali-resistant).Fully bonded to the substrate, therefore no flow paths for water under the membrane.Easy and fast application.The most complex roof penetrations can be securely incorporated in the seamless waterproofing system.Fast-curing.Can also be applied at sub-zero temperatures.Can be applied to almost all substrates, including variable substrates (when combined with Fleet Primers).Solvent-free.Test certificates and technical approvals (ETA, AbP) for the areas of roof waterproofing and the waterproofing of joints on water-impermeable concrete units.BBA certified.System Includes:Fleet Sealer CoatFleet Quartz SandFleet CoverFleet Coat 30Fleet fleeceFleet Coat 30Fleet Primer A2, P, G or M Deck by others Liquid-applied cold roof covering systems

Published [30/03/2026]

ICB GROUP: Fleet PMMA Liquid Applied For Use On Cold/ Inverted Roof - Waterproofing
Liquid-applied waterproofing for use on cold or inverted roofs.System comprises:Fleet sealer coat;Fleet Coat 30;Fleet fleece;Fleet Coat 30;Fleet Primer (either A2, G, M or P).Deck by others.Fleet Primer P is a fast-reactive primer used as a barrier on absorbent substrates in preparation for the later application of Fleet waterproofing.Easy to apply.Fast-curing.Very good adhesion on absorbent substrates.Hydrolysis- and alkali-resistant.Solvent-free.Fleet Coat 30 products are high-grade, PMMA-based waterproofing resins with low-temperature flexibility and are used to create durable and reliable roof waterproofing membranes and to waterproof joints on water-impermeable concrete with fleece reinforcement.Its liquid application allows seamless waterproofing systems to be applied to large areas, and even the most complex roof penetrations and details to be securely incorporated.Fleet Fleece is a synthetic-fibre fleece specially designed for use with Fleet PMMA waterproofing resins. The fleece enables the layer thickness to be controlled when applying waterproofing resins and also has a strengthening and crack-bridging effect in the hardened waterproofing layer.The Fleet Sealer Coat is used as a wearing layer for Fleet systems. It is a high-grade, mechanically durable finish and can be used for creating patterns or lettering. Different toppings can be applied to achieve the desired slip-resistant properties. Liquid-applied inverted roof covering systems

Published [30/03/2026]

ICB GROUP: Fleet PMMA Liquid Applied For Use On Cold/ Inverted Roof - Waterproofing
Liquid-applied waterproofing for use on cold or inverted roofs.System comprises:Fleet sealer coat;Fleet Coat 30;Fleet fleece;Fleet Coat 30;Fleet Primer (either A2, G, M or P).Deck by others.Fleet Primer P is a fast-reactive primer used as a barrier on absorbent substrates in preparation for the later application of Fleet waterproofing.Easy to apply.Fast-curing.Very good adhesion on absorbent substrates.Hydrolysis- and alkali-resistant.Solvent-free.Fleet Coat 30 products are high-grade, PMMA-based waterproofing resins with low-temperature flexibility and are used to create durable and reliable roof waterproofing membranes and to waterproof joints on water-impermeable concrete with fleece reinforcement.Its liquid application allows seamless waterproofing systems to be applied to large areas, and even the most complex roof penetrations and details to be securely incorporated.Fleet Fleece is a synthetic-fibre fleece specially designed for use with Fleet PMMA waterproofing resins. The fleece enables the layer thickness to be controlled when applying waterproofing resins and also has a strengthening and crack-bridging effect in the hardened waterproofing layer.The Fleet Sealer Coat is used as a wearing layer for Fleet systems. It is a high-grade, mechanically durable finish and can be used for creating patterns or lettering. Different toppings can be applied to achieve the desired slip-resistant properties. Liquid-applied inverted roof covering systems

Published [30/03/2026]

ICB GROUP: Fleet PMMA Liquid Applied Warm Roof System
Fleet Coat 30 products are high-grade, PMMA-based waterproofing resins with low-temperature flexibility and are used to create durable and reliable roof waterproofing membranes and to waterproof joints on water impermeable concrete with fleece reinforcement. Its liquid application allows seamless waterproofing systems to be applied to large areas, and even the most complex roof penetrations and details to be securely incorporated.Fleet Junction:A variant of Fleet Coat 30 which is made more viscous/ thixotropic to reduce run-off when applied to sloping and vertical surfaces. It is therefore used primarily for the waterproofing of details.Features and benefits:Highly flexible and crack-bridging even at extreme sub-zero temperatures.Permanently weather-resistant (UV-, hydrolysis- and alkali-resistant).Fully bonded to the substrate, therefore no flow paths for water under the membrane.Easy and fast application.The most complex roof penetrations can be securely incorporated in the seamless waterproofing system.Fast-curing.Can also be applied at sub-zero temperatures.Can be applied to almost all substrates, including variable substrates (when combined with Fleet Primers).Solvent-free.Test certificates and technical approvals (ETA, AbP) for the areas of roof waterproofing and the waterproofing of joints on water-impermeable concrete units.BBA certified.System Includes:Fleet Sealer Coat.Fleet Coat 30.Fleet Fleece.Fleet Coat 30.Stratavap Carrier Sheet.Evatherm A rigid polyisocyanurate (PIR) insulation.Instastik Adhesive.Stratavap Air & Vapour Control Layer.Evaprime SA.Deck by others. Liquid-applied warm roof covering systems

Published [30/03/2026]

ICB GROUP: Strata – Reinforced Bituminous Membrane For Green Roof To Cold Roof – Torch Applied
A root resistant waterproofing membrane, The antiroot properties are obtained by adding phenoxifatty acid ester, a specific antiroot agent, to the polymer-bitumen compound. Once applied, it forms a continuous barrier against roots.As it does not contain film or double-reinforced foils, defend antiroot polyester is more flexible and malleableduring application. The additive has been developed specifically as a root inhibitor, for both hot-laid bitumenand for torch-laid bitumen membranes, The product comes from thirty years of German experience in thewaterproofing industry.Manufactured from distilled and selected bitumen for industrial use containing high quantity ofelsatoplatomeric polymers such as to obtain a 'phase inversion' alloy. The continuous phase of this alloyconsists of the polymer in which the bitumen is dispersed, where the characteristics are determined by thepolymer matrix and not by the bitumen, even if it is the largest ingredient. The performance of bitumen istherefore increased, durability and resistance to high and low temperatures are improved, thus maintainingthe bitumen’s already excellent qualities of adhesion and waterproofing.The reinforcement of the membrane consists of single strand spunbound non-woven polyester fabric,with high basic weight (grammage). This fabric is isotopic, rot-proof, thermally-fixed and boasts: highmechanical resistance, considerable ultimate elongation, excellent resistance to puncturing and laceration.The membrane has both faces coated with Flamina, the hot-melt film, which stops the rolls of material fromsticking together. The reinforcement and the waterproofing mass are resistant to chemical effects of humic acids and fertilizers.Features and benefits:Resistant to roots also at the overlaps.It doesn’t disperse dangerous substances in the environment.Puncture resistant.BBA certified (BBA 18/5518).System Includes:StratagreenStratabase SBSStrataprimeDeck by others Reinforced bitumen membrane cold roof covering systems

Published [30/03/2026]

ICB GROUP: Strata – Reinforced Bituminous Membrane For Green Roof To Warm Roof – Flame Free And Torch Applied
A root resistant waterproofing membrane, The antiroot properties are obtained by adding phenoxifatty acid ester, a specific antiroot agent, to the polymer-bitumen compound. Once applied, it forms a continuous barrier against roots.As it does not contain film or double-reinforced foils, defend antiroot polyester is more flexible and malleable during application. The additive has been developed specifically as a root inhibitor, for both hot-laid bitumen and for torch-laid bitumen membranes, The product comes from thirty years of German experience in the waterproofing industry.Manufactured from distilled and selected bitumen for industrial use containing high quantity of elsatoplatomeric polymers such as to obtain a 'phase inversion' alloy. The continuous phase of this alloy consists of the polymer in which the bitumen is dispersed, where the characteristics are determined by the polymer matrix and not by the bitumen, even if it is the largest ingredient. The performance of bitumen is therefore increased, durability and resistance to high and low temperatures are improved, thus maintaining the bitumen’s already excellent qualities of adhesion and waterproofing.The reinforcement of the membrane consists of single strand spunbound non-woven polyester fabric, with high basic weight (grammage). This fabric is isotopic, rot-proof, thermally-fixed and boasts: high mechanical resistance, considerable ultimate elongation, excellent resistance to puncturing and laceration.The membrane has both faces coated with Flamina, the hot-melt film, which stops the rolls of material from sticking together. The reinforcement and the waterproofing mass are resistant to chemical effects of humic acids and fertilizers.Features and benefits:Resistant to roots also at the overlaps.It doesn’t disperse dangerous substances in the environment.Puncture resistant.BBA certified (BBA 18/5518).System Includes:StratagreenStratabase SAEvatherm A rigid polyisocyanurate (PIR) insulationInstastik AdhesiveStratavap Air & Vapour Control layerEvaprime SADeck by others Reinforced bitumen membrane warm roof covering systems

Published [30/03/2026]

ICB GROUP: Strata – Reinforced Bituminous Membrane To Warm Roof – Flame Free And Torch Applied
A torch-applied, polymer-modified bitumen roof membrane system.STRATAPRO M is a multi-layer composite bitumen waterproofing membranes. The underside of the membranes are made of SBS modified bitumen, while the upper layer is made of APP modified bitumen. The SBS on the lower face offers high level of flexibility, and boast elongation of up to 2000%, it will remain flexible in temperatures as low as –25°C, and has a high resistance to thermo-oxidative ageing. The upper layer consists of an elastoplastomeric mix of distilled bitumen, atactic and isotactic polypropylene and UV resistant polyolefin elastomers, supplemented with thermal shock stabilisers.The membrane has a composite prefabricated three-layer reinforcement system. A fibreglass mat is compressed between two layers of nonwoven polyester fabric, this reinforcement limits the movements of the membrane both at high and low temperatures providing stability to the membranes.Suitable for both torched application and mechanical fixing, the fibers within the membrane are impregnated and coated with an elastomeric mix using an exclusive procedure which guarantees absolute waterproofing, high resistance to tearing and impact, and excellent elasticity even at low temperatures.Features and benefits:The STRATAPRO range can be applied in a single layer or as a finishing layer in a multilayer system. STRATA PRO M provides a mineral slate finish.The high mechanical strength, flexibility, thermal stability and durability of the STRATAPRO range means it can be used on roofs subject to considerable dimensional variations in both hot and cold climates.Excellent fatigue strength.Resistant to dimensional variations and active cracks which appear on cement surfaces.A BBA certified (BBA 18/5518) reinforced bitumen membrane warm roof covering system.Reinforced bitumen membrane warm roof covering system includes:Stratapro MStratabase SAEvatherm A rigid polyisocyanurate (PIR) insulationInstastik AdhesiveStratavap Air & Vapour Control layerEvaprime SADeck by others Reinforced bitumen membrane warm roof covering systems

Published [30/03/2026]

ICB GROUP: Strata – Reinforced Bituminous Membrane To Warm Roof – Torch Applied
A polymer-modified bitumen, torch-applied roof membrane system.STRATAPRO M is a multi-layer composite bitumen waterproofing membranes. The underside of the membranes are made of SBS modified bitumen, while the upper layer is made of APP modified bitumen. The SBS on the lower face offers high level of flexibility, and boast elongation of up to 2000%, it will remain flexible in temperatures as low as –25°C, and has a high resistance to thermo-oxidative ageing. The upper layer consists of an elastoplastomeric mix of distilled bitumen, atactic and isotactic polypropylene and UV resistant polyolefin elastomers, supplemented with thermal shock stabilisers.The membrane has a composite prefabricated three-layer reinforcement system. A fibreglass mat is compressed between two layers of nonwoven polyester fabric, this reinforcement limits the movements of the membrane both at high and low temperatures providing stability to the membranes.Suitable for both torched application and mechanical fixing, the fibers within the membrane are impregnated and coated with an elastomeric mix using an exclusive procedure which guarantees absolute waterproofing, high resistance to tearing and impact, and excellent elasticity even at low temperatures.Features and benefits:The STRATAPRO range can be applied in a single layer or as a finishing layer in a multilayer system. STRATA PRO M provides a mineral slate finish.The high mechanical strength, flexibility, thermal stability and durability of the STRATAPRO range means it can be used on roofs subject to considerable dimensional variations in both hot and cold climates.Excellent fatigue strength.Resistant to dimensional variations and active cracks which appear on cement surfaces.BBA certified (BBA 18/5518).System Includes:Stratapro MStratabase SBSEvatherm T rigid polyisocyanurate (PIR) insulationInstastik AdhesiveStratavap Air & Vapour Control layerEvaprime SADeck by others Reinforced bitumen membrane warm roof covering systems

Published [30/03/2026]

ICB GROUP: Strata Self Adhesive – Reinforced Bituminous Membrane To Warm Roof – Flame Free
Flame free, self-adhesive reinforced bitumen membrane roofing system.STRATAPRO M SA is a multi-layer composite bitumen waterproofing membrane. The underside of themembrane is made of SBS modified bitumen, while the upper layer is made of APP modified bitumen. TheSBS on the lower face offers a high level of flexibility and boasts elongation of up to 2000%. It will remainflexible in temperatures as low as –25°c and has a high resistance to thermooxidative aging. The upperlayer consists of an elastoplastomeric mix of distilled bitumen, atactic and isotactic polypropylene and UVresistant polyolefin elastomers, supplemented with thermal shock stabilisers. The membrane has a selfadhesive backing, consisting of a specially selected mix of Venezuelan bitumen, tackifying resins andradial and linear elastomeric thermoplastic polymers.The STRATAPRO M SA system provides a traditional felt system that can be used in areas where hot works are not permitted. It has been independently tested for Wind and Fire resistance with data proving the system can withstand wind forces of up to 5kPa and holds both EXT.F.ABand Broof(t4) fire resistance ratings.Features and benefits:Safer, quicker and flame-free.Enables compliance with Safe2Torch guidelines.Independently tested for Wind and Fire resistance.BBA certified (BBA 18/5518).System Includes:Stratapro M SAStratabase SAEvatherm A rigid polyisocyanurate (PIR) insulationInstastik AdhesiveStratavap Air & Vapour Control layerEvaprime SADeck by others Reinforced bitumen membrane warm roof covering systems

Published [30/03/2026]