LINDAB LTD

UNITS 9 & 10 CAROUSEL WAY
RIVERSIDE BUSINESS PARK
NORTHAMPTON
NORTHAMPTONSHIRE NN3 9HG

Tel: 01604 788350
Fax: 01604 788357

Company Logo

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

LINDAB LTD: Adjustable fascia bracket for half round gutter 100
The adjustable fascia bracket has an innovative click function in the front. The bead of the half round gutter will hide the front of the bracket and the result will be a smooth and firm installation. The bracket is perfect when the slope of the fascia board is not vertical. It’s adjustable against a slope fascia with fixed positions for different slopes: 7, 14, 18, 22, 27, 38 and 45 degrees. A faster installation – both time and money saving. This product is made of precoated galvanized steel in 1,0mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The adjustable fascia bracket KLK is tested and approved according to this norm with result within class H (high load capability). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Adjustable fascia bracket for half round gutter 125
The adjustable fascia bracket has an innovative click function in the front. The bead of the half round gutter will hide the front of the bracket and the result will be a smooth and firm installation. The bracket is perfect when the slope of the fascia board is not vertical. It’s adjustable against a slope fascia with fixed positions for different slopes: 7, 14, 18, 22, 27, 38 and 45 degrees. A faster installation – both time and money saving. This product is made of precoated galvanized steel in 1,0mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The adjustable fascia bracket KLK is tested and approved according to this norm with result within class H (high load capability). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Adjustable fascia bracket for half round gutter 150
The adjustable fascia bracket has an innovative click function in the front. The bead of the half round gutter will hide the front of the bracket and the result will be a smooth and firm installation. The bracket is perfect when the slope of the fascia board is not vertical. It’s adjustable against a slope fascia with fixed positions for different slopes: 7, 14, 18, 22, 27, 38 and 45 degrees. A faster installation – both time and money saving. This product is made of precoated galvanized steel in 1,0mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The adjustable fascia bracket KLK is tested and approved according to this norm with result within class H (high load capability). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Bracket with gutter joint for half round gutter 125
A combined bracket with gutter joint for faster, easier and cleaner installation. Perfect for example round roofs with short pieces of gutters and there’s no place for both brackets and gutter joints. This product is made of both precoated galvanized steel in 0,7mm thickness and powder coated galvanized steel in 5mm thickness. According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The RSKR is tested and approved according to this norm with result within class H (high load capability). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Bracket with gutter joint for half round gutter 150
A combined bracket with gutter joint for faster, easier and cleaner installation. Perfect for example round roofs with short pieces of gutters and there’s no place for both brackets and gutter joints. This product is made of both precoated galvanized steel in 0,7mm thickness and powder coated galvanized steel in 5mm thickness. According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The RSKR is tested and approved according to this norm with result within class H (high load capability). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Construline BIM for Revit manual
User manual for Construline BIM for Revit, which is Lindabs range of steel profiles. The manual is available via Links -> Technical Description. , Documentation, BIM Manual

Published [11/02/21]

LINDAB LTD: Coverline BIM for Revit manual
User manual for Coverline BIM for Revit, which is Lindabs range of roof and wall cladding profiles, structural decking profiles and facade cassettes. The manual is available via Links -> Technical Description. , Documentation, BIM Manual

Published [11/02/21]

LINDAB LTD: Decking bracket for half round gutter 125
The decking bracket for half round gutter is perfect for decks and balconies. The special design collects water from decks better than other brackets. The bracket has a fixed back and a clip in front for fastening the half round gutter. This product is made of powder coated galvanized steel in 5mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur. According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The decking bracket KRD is tested and approved according to this norm with result within class H (high load capability). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Fascia bracket for half round gutter 100
The short fascia bracket is a bracket for only straight fascia boards. It has no clips that needs to be adjusted and bended, it’s ready to use as it is delivered. This product is made of powder coated galvanized steel in 5mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur. According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The adjustable fascia bracket KLK is tested and approved according to this norm with result within class H (high load capability). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Fascia bracket for half round gutter 125
The short fascia bracket is a bracket for only straight fascia boards. It has no clips that needs to be adjusted and bended, it’s ready to use as it is delivered. This product is made of powder coated galvanized steel in 5mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur. According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The adjustable fascia bracket KLK is tested and approved according to this norm with result within class H (high load capability). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Fascia bracket for half round gutter 150
The short fascia bracket is a bracket for only straight fascia boards. It has no clips that needs to be adjusted and bended, it’s ready to use as it is delivered. This product is made of powder coated galvanized steel in 5mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur. According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The adjustable fascia bracket KLK is tested and approved according to this norm with result within class H (high load capability). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Fascia bracket for rectangular gutter 140
Short rectangular bracket with clips is used on the fascia board. This product is made of powder coated galvanized steel in 5mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur.  According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The adjustable fascia bracket KLK is tested and approved according to this norm with result within class H (high load capability) , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: FFOB2 - Lining flashing for facade cassettes
This thin gauge steel flashing gives a decorative covering at the termination of a cassette facade, for example towards the side of a window. It can be obtained in the Lindab colour and coating of your choice. The depth of the flashing is adjustable to fit the actual distance between surfaces that needs to be connected. This flashing is used in combination with the fixation angle FFV. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: FFV - Fixation angle for facade cassettes
This thin gauge steel flashing gives a decorative covering at the termination of a cassette facade, for example towards the side of a window. It can be obtained in the Lindab colour and coating of your choice. This flashing is intended to be mounted on the underlying batten and to be used in combination with the lining flashing FFOB2. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: FIPI - Internal corner profile for building with cassette facade
This painted 1 mm steel profile gives a decorative covering of internal corners on buildings with a cassette facade. It is intended to be mounted on the underlying batten. Normally it is made in the same colour as the Cassette. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: FIPU - External corner profile for buildings with cassette facade
This painted 1 mm steel profile gives a decorative covering of external corners on buildings with a cassette facade. It is intended to be mounted on the underlying batten. It has adjustable flanges and angle measure to fit the façade design. Normally it is made in the same colour as the Cassette. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: FKAS1 - Facade Cassette Premium
Facade cassette Premium is a wall cladding system with hidden fasteners. The click function makes the assembly quick and easy. It also minimizes stresses in temperature changes. In order to facilitate installation and prevent assembly errors, each cassette is marked with a position number which is found in the drawing. The cassettes have a sloping edge that prevents moisture and rust in the joints. Punched holes create a well-ventilated solution. The Premium cassette is customized in size according to the length, height and hole dimensions of the facade. , Wall System, Facade Cassettes

Published [11/02/21]

LINDAB LTD: FKAS2 - Corner Cassette Premium
Corner cassette Premium is part of the wall cladding Facade Cassette Premium, with hidden fasteners. The click function makes the assembly quick and easy. It also minimizes stresses in temperature changes. In order to facilitate installation and prevent assembly errors, each cassette is marked with a position number which is found in the drawing. The cassettes have a sloping edge that prevents moisture and rust in the joints. Punched holes create a well-ventilated solution. Corner cassette Premium is customized to fit the facade appearance and to fit the Facade Cassette Premium system in size. , Wall System, Facade Cassettes

Published [11/02/21]

LINDAB LTD: FKAS3 - Window Cassette Premium
Window Cassette Premium is part of the wall cushion system Facade Cassette Premium, with hidden fasteners. The window cassette has a lower flange in the upper part, so that the cassette can be mounted as close to the windows as possible. The click function makes the assembly quick and easy. It also minimizes stresses in temperature changes. In order to facilitate installation and prevent assembly errors, each cassette is marked with a position number which is found in the drawing. The cassettes have a sloping edge that prevents moisture and rust in the joints. Punched holes create a well-ventilated solution. Window cassette Premium is customized to fit the facade appearance and to fit the Facade Cassette Premium system in size. , Wall System, Facade Cassettes

Published [11/02/21]

LINDAB LTD: FKAS4 - Corner Cassette Window Premium
Corner Cassette Window Premium is part of the wall cladding Facade Cassette Premium, with hidden fasteners. Corner Cassette Window has a lower flange in the upper edge, so that the cassette can be mounted as close to the window socket as possible. The click function makes the assembly quick and easy. It also minimizes stresses in temperature changes. In order to facilitate installation and prevent assembly errors, each cassette is marked with a position number which is found in the drawing. The cassettes have a sloping edge that prevents moisture and rust in the joints. Punched holes create a well-ventilated solution. Corner cassette Premium is customized to fit the facade appearance and to fit the Facade Cassette Premium system. , Wall System, Facade Cassettes

Published [11/02/21]

LINDAB LTD: FKASCL1 - Facade Cassette Classic
Lindab's facade cassettes is an alternative as well as a complement to other wall coverings, such as sandwich panels. The facade cassette system is a durable and above all an elegant system that can be used for all or part of the facade. Inspiration for the facade cassettes is derived from the classy Scandinavian architectural tradition with its consistent line play and its modern appearance. Facade Cassette Classic is a wall-covering solution with durable cassettes. The fastening of the cassette is visible. , Wall System, Facade Cassettes

Published [11/02/21]

LINDAB LTD: FKASCL2 - Corner Cassette Classic
Lindab's facade cartridges are an alternative as well as a complement to other wall coverings, such as sandwich panels. The facade cassettes are a durable and above all an elegant system that can be used for all or part of the facade. Inspiration for the facade cassettes is derived from the classy Scandinavian architectural tradition with its consistent line play and its modern appearance. Corner Cassette Classic complements Facade Cassette Classic with decorative corners that fits with the other Classic facade. The fastening of the cassette is visible. , Wall System, Facade Cassettes

Published [11/02/21]

LINDAB LTD: FLKT - Batten profile for facade cassettes
This painted 1 mm steel profile is used in the vertical joint between two Lindab Facade Cassette Premium. It works as a support for the cassette and gives colour adapted covering of the joint. Normally it is made in the same colour as the Cassette. See the BIM manual for further information. , Steel profiles, Battens

Published [11/02/21]

LINDAB LTD: FOTP - Roof drip edge flashing
This thin gauge steel flashing is used as a drip edge towards the gutter in the eaves. It can be obtained in the Lindab colour and coating of your choice. See the BIM manual for further information. , Flashings, Roof

Published [11/02/21]

LINDAB LTD: FSB - Base flashing for facade cassettes
This thin gauge steel flashing works as a drip edge and gives a decorative covering of the connection between the cassette facade and foundation. It has an adjustable depth to fit different types of connections between wall and foundation. Normally it is mounted behind the underlying batten. It can be obtained in the Lindab colour and coating of your choice. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: FSTART - Startup Profile Facade Cassette Premium
To stabilize the first Premium Cassette, in the bottom row, this startup profile is mounted. The first cassette is then mounted in the startup profile, instead of being linked to a cassette at the bottom. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: Gutter joint for half round gutter 100
The gutter joint with its innovative design has a rubber sealing for a better and guaranteed waterproof installation. The long-lasting EPDM sealing is attached from the factory with two spots of glue that makes it stay in the right position when installing. The gutter joint creates a firm and durable installation with its perfect fit and snap on function to the half round gutter. Absolutely no need for silicon or other sealant. Silicon will dry and will not be tight against the surface of the gutter and there’s a risk it will leak. This product is made of precoated galvanized steel in 0,7mm thickness and EPDM rubber (except for Magestic, which is a non coated material). Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Gutter joint for half round gutter 125
The gutter joint with its innovative design has a rubber sealing for a better and guaranteed waterproof installation. The long-lasting EPDM sealing is attached from the factory with two spots of glue that makes it stay in the right position when installing. The gutter joint creates a firm and durable installation with its perfect fit and snap on function to the half round gutter. Absolutely no need for silicon or other sealant. Silicon will dry and will not be tight against the surface of the gutter and there’s a risk it will leak. This product is made of precoated galvanized steel in 0,7mm thickness and EPDM rubber (except for Magestic, which is a non coated material). Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Gutter joint for half round gutter 150
The gutter joint with its innovative design has a rubber sealing for a better and guaranteed waterproof installation. The long-lasting EPDM sealing is attached from the factory with two spots of glue that makes it stay in the right position when installing. The gutter joint creates a firm and durable installation with its perfect fit and snap on function to the half round gutter. Absolutely no need for silicon or other sealant. Silicon will dry and will not be tight against the surface of the gutter and there’s a risk it will leak. This product is made of precoated galvanized steel in 0,7mm thickness and EPDM rubber (except for Magestic, which is a non coated material). Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Gutter joint for rectangular gutter 140
The rectangular gutter joint with its innovative design has a rubber sealing for a better and guaranteed waterproof installation. Just as easy to install as the gutter joint for the half round gutter. The long-lasting EPDM sealing is attached from the factory to make it easier when installing. The gutter joint creates a firm and durable installation with its perfect fit and snap on function to the rectangular gutter.  Absolutely no need for silicon or other sealant. Silicon will dry and will not be tight against the surface of the gutter and there’s a risk it will leak.  This product is made of precoated galvanized steel in 1,0 mm thickness and EPDM rubber. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur.  , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: Half round gutter 100
The half round gutter both looks good at the house and prevent the houses from being damaged because of rain. A perfect combination! Choose from a big assortment of fittings with a perfect fit to the gutter and in the same material for perfect match. This product is made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). Because of the high quality steel, coated or non coated, it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Half round gutter 125
The half round gutter both looks good at the house and prevent the houses from being damaged because of rain. A perfect combination! Choose from a big assortment of fittings with a perfect fit to the gutter and in the same material for perfect match. This product is made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). Because of the high quality steel, coated or non coated, it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Half round gutter 150
The half round gutter both looks good at the house and prevent the houses from being damaged because of rain. A perfect combination! Choose from a big assortment of fittings with a perfect fit to the gutter and in the same material for perfect match. This product is made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). Because of the high quality steel, coated or non coated, it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Half round gutter system
Lindab rainwater system is developed by professionals for both professionals and end-customers. It’s a simple but good system to install and use and we can promise it will fulfill its task. The products are developed for perfect fit to each other for a better looking installation. All products are available in the same color no matter if it’s a precoated product or powdercoated. The rainwater system is a big assortment with many different dimensions, colors and products for different type of installations. Both for small and big buildings. The gutter system contains all necessary products like gutter, stop ends and inner and outer angle profiles. All of the products in this system are made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). Because of the high quality steel, coated or non coated, it will age in the same way as all the other products in the system and no difference in design will occur. This product is made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: Hopper for round downpipe 100
A traditional water hopper for traditional installations! This products is often installed when standing seam are installed on the roofs. This product is made of precoated galvanized steel in 0,6mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Hopper for round downpipe 120
A traditional water hopper for traditional installations! This products is often installed when standing seam are installed on the roofs. This product is made of precoated galvanized steel in 0,6mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Hopper for round downpipe 75
A traditional water hopper for traditional installations! This products is often installed when standing seam are installed on the roofs. This product is made of precoated galvanized steel in 0,6mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Hopper for round downpipe 87
A traditional water hopper for traditional installations! This products is often installed when standing seam are installed on the roofs. This product is made of precoated galvanized steel in 0,6mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: HSK - Gable barge board flashing for metal roofs
This thin gauge steel flashing protects the connection between wall and roof on the gable against rainfall. It is primarily used on buildings with metal roofs and a roof overhang. It can be obtained in the Lindab colour and coating of your choice. The flashing has an adjustable height measure. See the BIM manual for further information. , Flashings, Roof

Published [11/02/21]

LINDAB LTD: HSK2 - Gable barge board flashing for membrane roofs
This thin gauge steel flashing protects the connection between wall and roof on the gable against rainfall. It is primarily used on buildings with membrane roofs without an overhang. It can be obtained in the Lindab colour and coating of your choice. The flashing has adjustable measures. See the BIM manual for further information. , Flashings, Roof

Published [11/02/21]

LINDAB LTD: Inner gutter angle for rectangular gutter 140
The rectangular gutter angle fits the gutter and the other products in the assortment perfect! It is welded using high quality material and equipment to guarantee a long lasting installation.  This product is made of powder coated galvanized steel in 0,6mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur.   , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: Left stop end for rectangular gutter 140
The traditional rectangular stop end for a nice and tight design. Installed with fasteners and silicon as sealing. This product is made of powder coated galvanized steel in 0,6mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur.  , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: One piece bend for round downpipe 100
A one piece bend to simplify the construction when the ground connection pipe is further out from the wall of the house than the downpipe.  This product is made of precoated galvanized steel in 0,6mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: One piece bend for round downpipe 120
A one piece bend to simplify the construction when the ground connection pipe is further out from the wall of the house than the downpipe.  This product is made of precoated galvanized steel in 0,6mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: One piece bend for round downpipe 75
A one piece bend to simplify the construction when the ground connection pipe is further out from the wall of the house than the downpipe.  This product is made of precoated galvanized steel in 0,6mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: One piece bend for round downpipe 87
A one piece bend to simplify the construction when the ground connection pipe is further out from the wall of the house than the downpipe.  This product is made of precoated galvanized steel in 0,6mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur. , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Outer gutter angle for rectangular gutter 140
The rectangular gutter angle fits the gutter and the other products in the assortment perfect! It is welded using high quality material and equipment to guarantee a long lasting installation.  This product is made of powder coated galvanized steel in 0,6mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur.   , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: P-HB1 - External corner flashing for sandwich wall
This thin gauge steel flashing gives a decorative covering and weather protection of the corner of buildings with sandwich panel walls. It can be obtained in the Lindab colour and coating of your choice. Both flanges of the flashing are adjustable to fit the actual wall thickness. This flashing is used in combination with a vertical joint flashing on each side of the corner. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: P-HPIL1 - Corner joint flashing for sandwich wall
This thin gauge steel flashing gives a decorative covering and weather protection of inner corners of buildings with Sandwich Panel walls. It builds out from the wall to give room for the Panel screws behind it. It can be obtained in the Lindab colour and coating of your choice. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: P-PIL1 - Vertical joint flashing for sandwich wall
This thin gauge steel flashing gives a decorative covering and weather protection for the vertical joints between sandwich panels. It can be obtained in the Lindab colour and coating of your choice. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: P-SYLLB - Base flashing for sandwich wall
This thin gauge steel flashing works as a drip edge and gives a decorative covering of the connection between sandwich wall and foundation. It has adjustable measures to fit different types of connections between wall and foundation. It can be obtained in the Lindab colour and coating of your choice. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: Rafter bracket for rectangular gutter 140
Long rectangular rafter bracket with clips is used on the roof pitch under the roof material and bended at the construction site to the right degrees to create a good slope for the gutter.  This product is made of powder coated galvanized steel in 5mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur.  According to applicable European Norms (EN 1462:2005) all brackets for rainwater systems need to be classified according to load bearing capacity. The EN norm has two load Classes H (750 N) and L (500 N). The adjustable fascia bracket KLK is tested and approved according to this norm with result within class H (high load capability).  , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: Rainline BIM for Archicad manual
User manual for Rainline BIM for ARCHICAD, which is Lindabs range of rainwater system products.  The manual is available via Links -> Technical Description. , Documentation, BIM Manual

Published [11/02/21]

LINDAB LTD: Rectangular gutter 140
The rectangular gutter is a traditional product used for many years. It has a rounded bead in the front for a faster and easier installation. The bead makes it possible to install the gutter traditionally with put any gutter joint or with the gutter joint from Lindab. This product is made of precoated galvanized steel in 0,6mm thickness. Because of the high quality steel it will age in the same way as all the other products in the system and no difference in design will occur.  , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: Rectangular gutter system 140
Lindab rainwater system is developed by professionals for both professionals and end-customers. It’s a simple but good system to install and use and we can promise it will fulfill its task. The products are developed for perfect fit to each other for a better looking installation. All products are available in the same color no matter if it’s a precoated product or powdercoated. The rainwater system is a big assortment with many different dimensions, colors and products for different type of installations. Both for small and big buildings. The gutter system contains all necessary products like gutter, stop ends and inner and outer angle profiles. All of the products in this system are made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). Because of the high quality steel, coated or non coated, it will age in the same way as all the other products in the system and no difference in design will occur. This product is made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: Reinforced pipe 2000mm
A reinforced pipe in the length 2 meter.  Reinforced pipes and outlets a perfect for public areas, such as schools and arenas, to withstand accidents or abuse. Choose from coated, stainless or galvanized finishes. The products are made of 2 mm hot dip-galvanized steel or 1.5 mm stainless steel plate. Connect the reinforced pipes to the ground connection with a drain shoe (BUTK). , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Reinforced pipe with self-cleaning leaf filter in the bottom 2000mm
A reinforced pipe in the length 2 meter with a self-cleaning leaf filter in the bottom.  Reinforced pipes and outlets a perfect for public areas, such as schools and arenas, to withstand accidents or abuse. Choose from coated, stainless or galvanized finishes. The products are made of 2 mm hot dip-galvanized steel or 1.5 mm stainless steel plate. Connect the reinforced pipes to the ground connection with a drain shoe (BUTK). , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Reinforced pipe with self-cleaning leaf filter in the bottom 300mm
A reinforced pipe in the length 300mm with a self-cleaning leaf filter. This product is very similar to the product SLS (which is in plastci). Reinforced pipes and outlets a perfect for public areas, such as schools and arenas, to withstand accidents or abuse. Choose from coated, stainless or galvanized finishes. The products are made of 2 mm hot dip-galvanized steel or 1.5 mm stainless steel plate. Connect the reinforced pipes to the ground connection with a drain shoe (BUTK). , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Reinforced pipe with self-cleaning leaf filter in the bottom 850mm
A reinforced pipe in the length 850mm with a self-cleaning leaf filter. Reinforced pipes and outlets a perfect for public areas, such as schools and arenas, to withstand accidents or abuse. Choose from coated, stainless or galvanized finishes. The products are made of 2 mm hot dip-galvanized steel or 1.5 mm stainless steel plate. Connect the reinforced pipes to the ground connection with a drain shoe (BUTK). , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Reinforced pipe with self-cleaning leaf filter in the top 2000mm
A reinforced pipe in the length 2 meter with a self-cleaning leaf filter in the top.  Reinforced pipes and outlets a perfect for public areas, such as schools and arenas, to withstand accidents or abuse. Choose from coated, stainless or galvanized finishes. The products are made of 2 mm hot dip-galvanized steel or 1.5 mm stainless steel plate. Connect the reinforced pipes to the ground connection with a drain shoe (BUTK). , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Reinforced pipe with shoe 2000mm
A reinforced pipe in the length 2 meter with a shoe in the bottom. Reinforced pipes and outlets a perfect for public areas, such as schools and arenas, to withstand accidents or abuse. Choose from coated, stainless or galvanized finishes. The products are made of 2 mm hot dip-galvanized steel or 1.5 mm stainless steel plate. Connect the reinforced pipes to the ground connection with a drain shoe (BUTK). , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Reinforced pipe with shoe 850mm
A reinforced pipe in the length 850mm with a shoe. Reinforced pipes and outlets a perfect for public areas, such as schools and arenas, to withstand accidents or abuse. Choose from coated, stainless or galvanized finishes. The products are made of 2 mm hot dip-galvanized steel or 1.5 mm stainless steel plate. Connect the reinforced pipes to the ground connection with a drain shoe (BUTK). , Rainwater System, Accessories

Published [11/02/21]

LINDAB LTD: Right stop end for rectangular gutter 140
The traditional rectangular stop end for a nice and tight design. Installed with fasteners and silicon as sealing. This product is made of powder coated galvanized steel in 0,6mm thickness. The powder is carefully developed to have perfect match to the precoated material and no difference in design will occur.  , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: Roof profile LLP20
A classic and common used roof profile that suites most applications. Appreciated for its simplicity and function. Made of polyester coated metal sheet. For exact color range in your country, please visit your local Lindab website. For static design and calculations, use Lindabs own developed software Lindab StructuralDesigner which you will find on Lindabs website. For information about geometry and section properties, use Lindabs web application EC3Library which you will find on Lindabs website. , Steel profiles, Profiled Sheeting

Published [11/02/21]

LINDAB LTD: Roof profile LTP115
A roof profile that suites steel canopies and buildings with larger span between bearing supports. Made of polyester coated metal sheet. For exact color range in your country, please visit your local Lindab website. For static design and calculations, use Lindabs own developed software Lindab StructuralDesigner which you will find on Lindabs website. For information about geometry and section properties, use Lindabs web application EC3Library which you will find on Lindabs website. , Steel profiles, Profiled Sheeting

Published [11/02/21]

LINDAB LTD: Roof profile LTP20
A classic roof profile that suites most applications. Made of polyester coated metal sheet.For exact color range in your country, please visit your local Lindab website. For static design and calculations, use Lindabs own developed software Lindab StructuralDesigner which you will find on Lindabs website. For information about geometry and section properties, use Lindabs web application EC3Library which you will find on Lindabs website. , Steel profiles, Profiled Sheeting

Published [11/02/21]

LINDAB LTD: Roof profile LTP45
A roof profile with good loading capacity and commonly used for larger buildings. Made of polyester coated metal sheet. For exact color range in your country, please visit your local Lindab website. For static design and calculations, use Lindabs own developed software Lindab StructuralDesigner which you will find on Lindabs website. For information about geometry and section properties, use Lindabs web application EC3Library which you will find on Lindabs website. , Steel profiles, Profiled Sheeting

Published [11/02/21]

LINDAB LTD: Round downpipe system 100 for rectangular gutter 140
Lindab rainwater system is developed by professionals for both professionals and end-customers. It’s a simple but good system to install and use and we can promise it will fulfill its task. The products are developed for perfect fit to each other for a better looking installation. All products are available in the same color no matter if it’s a precoated product or powdercoated. The rainwater system is a big assortment with many different dimensions, colors and products for different type of installations. Both for small and big buildings. The downpipe system contains all necessary products from the nozzle piece connected to the gutter and down to the end. Choose between a pipe down in the ground, a shoe or one of Lindabs solutions for cleaning. All of the products in this system are made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). Because of the high quality steel, coated or non coated, it will age in the same way as all the other products in the system and no difference in design will occur. This product is made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: Round downpipe system 120 for rectangular gutter 140
Lindab rainwater system is developed by professionals for both professionals and end-customers. It’s a simple but good system to install and use and we can promise it will fulfill its task. The products are developed for perfect fit to each other for a better looking installation. All products are available in the same color no matter if it’s a precoated product or powdercoated. The rainwater system is a big assortment with many different dimensions, colors and products for different type of installations. Both for small and big buildings. The downpipe system contains all necessary products from the nozzle piece connected to the gutter and down to the end. Choose between a pipe down in the ground, a shoe or one of Lindabs solutions for cleaning. All of the products in this system are made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). Because of the high quality steel, coated or non coated, it will age in the same way as all the other products in the system and no difference in design will occur. This product is made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: Round downpipe system 87 for rectangular gutter 140
Lindab rainwater system is developed by professionals for both professionals and end-customers. It’s a simple but good system to install and use and we can promise it will fulfill its task. The products are developed for perfect fit to each other for a better looking installation. All products are available in the same color no matter if it’s a precoated product or powdercoated. The rainwater system is a big assortment with many different dimensions, colors and products for different type of installations. Both for small and big buildings. The downpipe system contains all necessary products from the nozzle piece connected to the gutter and down to the end. Choose between a pipe down in the ground, a shoe or one of Lindabs solutions for cleaning. All of the products in this system are made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). Because of the high quality steel, coated or non coated, it will age in the same way as all the other products in the system and no difference in design will occur. This product is made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). , Rainwater System, Rectangular System

Published [11/02/21]

LINDAB LTD: Round downpipe system for half round gutter
Lindab rainwater system is developed by professionals for both professionals and end-customers. It’s a simple but good system to install and use and we can promise it will fulfill its task. The products are developed for perfect fit to each other for a better looking installation. All products are available in the same color no matter if it’s a precoated product or powdercoated. The rainwater system is a big assortment with many different dimensions, colors and products for different type of installations. Both for small and big buildings. The downpipe system contains all necessary products from the nozzle piece connected to the gutter and down to the end. Choose between a pipe down in the ground, a shoe or one of Lindabs solutions for cleaning. All of the products in this system are made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). Because of the high quality steel, coated or non coated, it will age in the same way as all the other products in the system and no difference in design will occur. This product is made of precoated galvanized steel in 0,6mm thickness (except for Magestic, which is a non coated material). , Rainwater System, Half Round System

Published [11/02/21]

LINDAB LTD: S7 - Batten
Galvanized steel batten that can be used as a roof railing under profiled sheet or roof tile, as an air gap and mounting support on the wall behind profiled sheets or cassettes, but also as a secondary for ceiling. , Steel profiles, Battens

Published [11/02/21]

LINDAB LTD: Sandwich BIM for Revit manual
User manual for Sandwich BIM for Revit, which is Lindabs range of sandwich panels. The manual is available via Links -> Technical Description. , Documentation, BIM Manual

Published [11/02/21]

LINDAB LTD: Sandwich Panel BASE - Horisontal Installation
Lindab's mineral wool panels have excellent fire resistance, strength and thermal insulation. Mineral Wool Panel BASE has been developed to combine these properties in the best possible way, to make the panel as optimal as possible in all categories. Lindab offers panels in a total of 30 different colours from our standard and optional range. Several thicknesses are available, and thicknesses over 150mm can be delivered with built-in bars for enhanced burglary protection. , Wall System, Sandwich Panels

Published [11/02/21]

LINDAB LTD: Sandwich Panel LIGHT - Horisontal Installation
Lindab's mineral wool panels have excellent fire resistance, strength and thermal insulation. Mineral wool panel LIGHT is developed with special focus on high thermal insulation and therefore has an extra low U-value. LIGHT is also a panel with low weight. Lindab offers panels in a total of 30 different colours from our standard and optional range. Several thicknesses are available, and thicknesses over 150mm can be delivered with built-in bars for enhanced burglary protection. , Wall System, Sandwich Panels

Published [11/02/21]

LINDAB LTD: Sandwich Panel PLUS - Horisontal Installation
Lindab's mineral wool panels have excellent fire resistance, strength and thermal insulation. Mineral wool panel PLUS is developed with special focus on high strength and fire resistance. Lindab offers panels in a total of 30 different colours from our standard and optional range. Several thicknesses are available, and thicknesses over 150mm can be delivered with built-in bars for enhanced burglary protection. For further reinforcement of the fire protection, up to EI180, Lindab panels can be used together with fire-reinforced joints in dimensions from 150mm and above. , Wall System, Sandwich Panels

Published [11/02/21]

LINDAB LTD: Seam roof profile SRP25
Do you dream of a roof suitable for a turn of the century villa, cottage in the woods or functional new home you're thinking of building? Or maybe you need a durable roof for that rental property you're planning on renovating? The inspiration for Lindab SRP 25 is taken from the traditional standing seam roof. You simply click the profiles together with no need for special tools. You soon have an elegant, timeless roof, reminiscent of solid craftsmanship. Choose from several classic and modern colours with or without design folds. No matter what building you put the seam profiles on, you get a beautiful, durable and easy-care roof that looks attractive for many years to come. Benefits with the roof are: • elegant and strong • suitable for both older and newer houses • easy to install • minimal maintenance • lightweight • comes with all the accessories you need • high quality and finish For material qualities, coatings and color range in your country, please visit your local Lindab website. , Steel profiles, Profiled Sheeting

Published [11/02/21]

LINDAB LTD: Seamline BIM for Revit manual
User manual for Seamline BIM for Revit, which is Lindabs range of standing seam roof products. The manual is available via Links -> Technical Description. , Documentation, BIM Manual

Published [11/02/21]

LINDAB LTD: Sectional overhead door - garage
Lindab industrial and garage doors support the architects' visions for beautiful, functional and sustainable architecture as well as the contractors’ need for efficiency.  Now you can download our industrial and garage doors as BIM objects. Our BIM objects are developed by architects for architects and support the digital work flows in the AEC industry. A wealth of design options and features enhances architectural creativity In addition to various standard colours a Lindab door can be tinted in all the colours of the rainbow. The doors are tailor made and easy to integrate in any project - whether it is an industrial, agricultural or office building, a sports hall or shopping centre. It has never been easier to be creative with doors.   Environmentally friendly core material with high insulation capacities Lindab industrial and garage doors are designed from a sustainable approach. In the production we use green energy and the core material of our doors is steel - one of the few materials that can be recycled indefinitely without losing the properties. Lindab doors are designed to last for many years, and since the doors are 98% recyclable they are a natural part of the circular economy. Our sustainable solutions are a natural result of Lindab's Good Thinking philosophy.  We have conducted an EPD (Environmental Product Declaration) "from cradle to grave" which provides AEC professionals, developers and building owners with the necessary documentation for sustainable building standards such as DGNB and BREEAM. The EPD is proof of our efforts to provide doors that support sustainable construction. , Garage Doors, Sectional Overhead Doors

Published [11/02/21]

LINDAB LTD: Sectional overhead door - garage (medium)
Lindab industrial and garage doors support the architects' visions for beautiful, functional and sustainable architecture as well as the contractors’ need for efficiency.  Now you can download our industrial and garage doors as BIM objects. Our BIM objects are developed by architects for architects and support the digital work flows in the AEC industry. A wealth of design options and features enhances architectural creativity In addition to various standard colours a Lindab door can be tinted in all the colours of the rainbow. The doors are tailor made and easy to integrate in any project - whether it is an industrial, agricultural or office building, a sports hall or shopping centre. It has never been easier to be creative with doors.   Environmentally friendly core material with high insulation capacities Lindab industrial and garage doors are designed from a sustainable approach. In the production we use green energy and the core material of our doors is steel - one of the few materials that can be recycled indefinitely without losing the properties. Lindab doors are designed to last for many years, and since the doors are 98% recyclable they are a natural part of the circular economy. Our sustainable solutions are a natural result of Lindab's Good Thinking philosophy.  We have conducted an EPD (Environmental Product Declaration) "from cradle to grave" which provides AEC professionals, developers and building owners with the necessary documentation for sustainable building standards such as DGNB and BREEAM. The EPD is proof of our efforts to provide doors that support sustainable construction. , Garage Doors, Sectional Overhead Doors

Published [11/02/21]

LINDAB LTD: Sectional overhead door - high lift
Lindab industrial and garage doors support the architects' visions for beautiful, functional and sustainable architecture as well as the contractors’ need for efficiency.  Now you can download our industrial and garage doors as BIM objects. Our BIM objects are developed by architects for architects and support the digital work flows in the AEC industry. A wealth of design options and features enhances architectural creativity In addition to various standard colours a Lindab door can be tinted in all the colours of the rainbow. The doors are tailor made and easy to integrate in any project - whether it is an industrial, agricultural or office building, a sports hall or shopping centre. It has never been easier to be creative with doors.   Environmentally friendly core material with high insulation capacities Lindab industrial and garage doors are designed from a sustainable approach. In the production we use green energy and the core material of our doors is steel - one of the few materials that can be recycled indefinitely without losing the properties. Lindab doors are designed to last for many years, and since the doors are 98% recyclable they are a natural part of the circular economy. Our sustainable solutions are a natural result of Lindab's Good Thinking philosophy.  We have conducted an EPD (Environmental Product Declaration) "from cradle to grave" which provides AEC professionals, developers and building owners with the necessary documentation for sustainable building standards such as DGNB and BREEAM. The EPD is proof of our efforts to provide doors that support sustainable construction. , Industrial Doors, Sectional Overhead Doors

Published [11/02/21]

LINDAB LTD: Sectional overhead door - low headroom
Lindab industrial and garage doors support the architects' visions for beautiful, functional and sustainable architecture as well as the contractors’ need for efficiency.  Now you can download our industrial and garage doors as BIM objects. Our BIM objects are developed by architects for architects and support the digital work flows in the AEC industry. A wealth of design options and features enhances architectural creativity In addition to various standard colours a Lindab door can be tinted in all the colours of the rainbow. The doors are tailor made and easy to integrate in any project - whether it is an industrial, agricultural or office building, a sports hall or shopping centre. It has never been easier to be creative with doors.   Environmentally friendly core material with high insulation capacities Lindab industrial and garage doors are designed from a sustainable approach. In the production we use green energy and the core material of our doors is steel - one of the few materials that can be recycled indefinitely without losing the properties. Lindab doors are designed to last for many years, and since the doors are 98% recyclable they are a natural part of the circular economy. Our sustainable solutions are a natural result of Lindab's Good Thinking philosophy.  We have conducted an EPD (Environmental Product Declaration) "from cradle to grave" which provides AEC professionals, developers and building owners with the necessary documentation for sustainable building standards such as DGNB and BREEAM. The EPD is proof of our efforts to provide doors that support sustainable construction. , Industrial Doors, Sectional Overhead Doors

Published [11/02/21]

LINDAB LTD: Sectional overhead door - standard lift
Lindab industrial and garage doors support the architects' visions for beautiful, functional and sustainable architecture as well as the contractors’ need for efficiency.  Now you can download our industrial and garage doors as BIM objects. Our BIM objects are developed by architects for architects and support the digital work flows in the AEC industry. A wealth of design options and features enhances architectural creativity In addition to various standard colours a Lindab door can be tinted in all the colours of the rainbow. The doors are tailor made and easy to integrate in any project - whether it is an industrial, agricultural or office building, a sports hall or shopping centre. It has never been easier to be creative with doors.   Environmentally friendly core material with high insulation capacities Lindab industrial and garage doors are designed from a sustainable approach. In the production we use green energy and the core material of our doors is steel - one of the few materials that can be recycled indefinitely without losing the properties. Lindab doors are designed to last for many years, and since the doors are 98% recyclable they are a natural part of the circular economy. Our sustainable solutions are a natural result of Lindab's Good Thinking philosophy.  We have conducted an EPD (Environmental Product Declaration) "from cradle to grave" which provides AEC professionals, developers and building owners with the necessary documentation for sustainable building standards such as DGNB and BREEAM. The EPD is proof of our efforts to provide doors that support sustainable construction. , Industrial Doors, Sectional Overhead Doors

Published [11/02/21]

LINDAB LTD: Sectional overhead door - vertical lift
Lindab industrial and garage doors support the architects' visions for beautiful, functional and sustainable architecture as well as the contractors’ need for efficiency.  Now you can download our industrial and garage doors as BIM objects. Our BIM objects are developed by architects for architects and support the digital work flows in the AEC industry. A wealth of design options and features enhances architectural creativity In addition to various standard colours a Lindab door can be tinted in all the colours of the rainbow. The doors are tailor made and easy to integrate in any project - whether it is an industrial, agricultural or office building, a sports hall or shopping centre. It has never been easier to be creative with doors.   Environmentally friendly core material with high insulation capacities Lindab industrial and garage doors are designed from a sustainable approach. In the production we use green energy and the core material of our doors is steel - one of the few materials that can be recycled indefinitely without losing the properties. Lindab doors are designed to last for many years, and since the doors are 98% recyclable they are a natural part of the circular economy. Our sustainable solutions are a natural result of Lindab's Good Thinking philosophy.  We have conducted an EPD (Environmental Product Declaration) "from cradle to grave" which provides AEC professionals, developers and building owners with the necessary documentation for sustainable building standards such as DGNB and BREEAM. The EPD is proof of our efforts to provide doors that support sustainable construction. , Industrial Doors, Sectional Overhead Doors

Published [11/02/21]

LINDAB LTD: SFB2 - Front Eaves Flashing
This thin gauge steel flashing gives a decorative covering and weather protection of the connection between wall and roof in the eaves of buildings without a roof overhang. It can be obtained in the Lindab colour and coating of your choice. Usually the same colour as the gutter is chosen for this flashing, which is mounted in front of it. The flashing has an adjustable height measure. This flashing is normally used in combination with an eaves board flashing (FOTP). See the BIM manual for further information. , Flashings, Roof

Published [11/02/21]

LINDAB LTD: SKBO - Upper parapet flashing for sandwich wall
This thin gauge steel flashing gives a decorative covering and protection against rainfall for the front and upper side of the parapet wall. It can be obtained in the Lindab colour and coating of your choice. The flashing has an adjustable depth measure to fit the actual wall thickness. It is intended to be used in combination with flashing SKBU – Lower parapet flashing. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: SKBU - Lower parapet flashing for sandwich wall
This thin gauge steel flashing gives a decorative covering and protection against rainfall for the back side of the parapet wall. It can be obtained in the Lindab colour and coating of your choice. It is intended to be used in combination with flashing SKBO – Upper parapet flashing. See the BIM manual for further information. , Flashings, Wall

Published [11/02/21]

LINDAB LTD: Standing Seam Roof Aluminium
Natural (non-coated) aluminium for standing seam roofs, facades and flashings. The quality PX12AL is an extra soft tinsmith quality. The sheet has practically no resilience so that tight seams can be made. The material may be seamed by machine or by hand. PX12AL has a typical yield strength of 100-105 MPA and a typical elongation of 20%. Aluminium has a very good resistance to corrosion and can be used until corrosion class C5. , Standing Seam Roof, Aluminium

Published [11/02/21]

LINDAB LTD: Standing Seam Roof Aluminium PVDF
Color coated aluminium for standing seam roofs, facades and flashings. The quality PX12AL is an extra soft tinsmith quality. The sheet has practically no resilience so that tight seams can be made. The material may be seamed by machine or by hand. PX12AL has a typical yield strength of 100-105 MPA and a typical elongation of 20%. The paint coating is a PVDF (also known as PVF2) that retains gloss and colour very well. The nominal coating thickness is 25 micron, and the nominal gloss is 30. Aluminium has a very good resistance to corrosion and can be used until corrosion class C5. , Standing Seam Roof, Aluminium

Published [11/02/21]

LINDAB LTD: Standing Seam Roof Aluminium Zinc
Aluminium-zinc coated sheet steel that can be used until corrosivity class C4. The metal coating consists of 55% weight percent aluminium, 43,4% zinc and 1,6% Silica. The coating weight is 185 g/m2 and double side, and is named AZ185. The layer of Aluminium-zinc is 25 μm (0,025 mm) thick per side. The surface is treated with anti-fingerprint to prevent discolouring during handling and to facilitate shaping. The steel core in the tinsmith quality is an extra soft sheet steel. The material has practically no spring back, making it possible to make tight seams. The material can be both machine and hand seamed. For both the sake of corrosion and appearance, avoid the following combinations: • Aluminium-zinc in combination with copper, brass, iron and led as that can give rise to galvanic corrosion. Avoid runoff from these substances and bitumen products onto the sheet steel. • Wet concrete, cement and plaster which are strongly basic. • Aluminium-zinc in contact with hardwood, wet tree or pressure treated wood containing copper. , Standing Seam Roof, Steel

Published [11/02/21]

LINDAB LTD: Standing Seam Roof Magestic
Lindab Magestic is a newly developed and more advanced rust protection than normal galvanized. The material can be used up until corrosivity class C4. It is delivered in ZM310, meaning 310 grams per m2 and double side. Equivalent to 24 micron coating on each side. The base material is an extra soft tinsmith quality. The steel has practically no spring back so that tight seams can be achieved. The material can be both hand and machine seamed. Lindab Magestic will patinate over time. It can end up being dark grey, and already after a couple of months outside you can usually see how it has started to darken which gives a rustic and genuine feeling. Avoid greasy fingers or dirty gloves as it can make the surface age unevenly. , Standing Seam Roof, Steel

Published [11/02/21]

LINDAB LTD: Standing Seam Roof Steel Durafrost
Durafrost is a wrinkled high build polyester coated steel for standing seam roofing and flashings. The base material PLX is an extra soft steel tinsmith quality. The steel has practically no spring back so that tight seams can be achieved. The material can be both hand or machine seamed. The rust protection is Z350, 350 g zinc per m² and double side. This equals 25 micron of zinc on each side. Lindab DuraFrost is a matt product with a gloss as low as 5. The nominal coating thickness is 30 micron. The wrinkled paint which gets wrinkled during the curing process, makes the surface more scratch resistant compared to a smooth coating and the coating is optimized for good wear resistance. , Standing Seam Roof, Steel

Published [11/02/21]

LINDAB LTD: Standing Seam Roof Steel Greencoat
GreenCoat for standing seam roof is a high build polyester coated steel. The base material PLX is an extra soft tinsmith quality. The steel has practically no spring back so that tight seams can be achieved. The material can be both hand or machine seamed. The PLX is coated with 350 g zinc per m² and double side. This equals 25 micron of zinc on each side. GreenCoat is a registered trademark by SSAB and a patented concept for organic coating. The nominal thickness of the coating is 36 micron and the gloss for the matt colors is 10 and for the glossy colors 40. , Standing Seam Roof, Steel

Published [11/02/21]

LINDAB LTD: SUB - Roof soffit flashing
This thin gauge steel flashing gives a decorative covering of the connection between wall and roof soffit in the eaves and gable of buildings with a roof overhang. It can be obtained in the Lindab colour and coating of your choice. The flashing has an adjustable length and angle measure. See the BIM manual for further information. , Flashings, Roof

Published [11/02/21]