TATA STEEL

SHOTTON WORKS
DEESIDE
FLINTSHIRE CH5 2NH

Tel: 01244 892199
Fax:

Company Logo

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

TATA STEEL: Catnic ANG - Solid Leaf wall Lintels - Angle
Easy to use Solid Wall Single Leaf wall Lintels. The ANG lintels are hot dip galvanised Angles for standard duty use in 102mm exterior walls. Some ANG lintels are powder coated for superb weather, impact and abrasion resistance , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic BHD - Classic Box Lintel - Heavy duty
The BHD lintels are Classic Box lintels for heavy duty loads in internal walls. They are manufactured from galvansied steel that has powder coated for superb weather, impact and abrasion resistance and feature staggered holes to three sides to allow for an integral plaster key. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic BSD - Classic Box Lintel - Standard duty
The BSD lintels are Classic Box lintels for standard duty loads in internal walls. They are manufactured from galvansied steel that has powder coated for superb weather, impact and abrasion resistance and feature staggered holes to three sides to allow for an integral plaster key. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic BXD - Classic Box Lintel - Extra Heavy duty
The BXD lintels are Classic Box lintels for extra heavy duty loads in internal walls. They are manufactured from galvansied steel that has powder coated for superb weather, impact and abrasion resistance and feature staggered holes to three sides to allow for an integral plaster key. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CCS - Solid Single Leaf wall Lintel - Channel
Easy to use Solid Wall Single Leaf wall Lintels. The CCS lintels are hot dip galvanised steel channel profiles that are powder coated for superb weather, impact and abrasion resistance. They are used for standard and heavy duty use in 102mm exterior walls. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CG cavity wall Lintels
Easy to use Open Back cavity wall Lintels without base plates formed from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. The lintels have a built-in Damp-Proof course (DPC) and staggered slots on the inner flange to act as an integral plaster key. They are insulated throughout their length to maximise thermal efficiency and minise cold bridging , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CGE cavity wall Lintels
Easy to use Open Back cavity wall Lintels for closed eaves without base plates formed from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. The lintels have a built-in Damp-Proof course (DPC) and staggered slots on the inner flange to act as an integral plaster key. They are insulated throughout their length to maximise thermal efficiency and minise cold bridging , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CH cavity wall Lintels
Easy to use Open Back cavity wall Lintels with perforated base plates formed from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. The lintels have a built-in Damp-Proof course (DPC) and staggered slots on the inner flange to act as an integral plaster key. They are insulated throughout their length to maximise thermal efficiency and minise cold bridging , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CN100 - Channel profile lintels for light duty loads in internal walls
The CN100 lintels are channel profile lintels for light duty loads in internal walls. They are manufactured from galvansied steel that has powder coated for superb weather, impact and abrasion resistance and feature holes to all sides of the profile to allow for an integral plaster key. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CN42C, CN99/124C & CN99/1644C - standard duty Classic Box lintels
CN42C, CN99/124C & CN99/1644C are standard duty Classic Box lintels for 50mm, 75mm and 100mm wide cavities. They are manufactured from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CN71 - External solid wall Classic Box Lintels
Easy to use External solid wall Classic Box Lintels formed from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. The lintels are insulated throughout their length to maximise thermal efficiency and minise cold bridging and feature staggered slots on the inner flange to act as an integral plaster key. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CN81 - External solid wall Classic Box Lintels
Easy to use External solid wall Classic Box Lintels formed from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. The lintels are insulated throughout their length to maximise thermal efficiency and minise cold bridging and feature staggered slots on the inner flange to act as an integral plaster key. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CN92 & CN102 - hot dip galvanised corrugated lintels
The CN92 and CN102 hot dip galvanised lintels are corrugated lintels for extra light duty loads in internal walls. They feature lozenge-shaped holes to the sides of the corrugated profile to allow for an integral plaster key. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CN99/394C - External solid wall Classic Box Lintels
Easy to use External solid wall Classic Box Lintels formed from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. The lintels are insulated throughout their length to maximise thermal efficiency and minise cold bridging and feature staggered slots on the inner flange to act as an integral plaster key. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CTF - Timber Frame cavity wall Lintels
Easy to use Timber Frame cavity wall Lintels formed from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. The lintels have a built-in Damp-Proof course (DPC) , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CTJ - Thin Joint cavity wall Lintels
Easy to use Thin Joint cavity wall Lintels formed from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. The lintels have a built-in Damp-Proof course (DPC) and are insulated throughout their length to maximise thermal efficiency and minise cold bridging , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CX cavity wall Lintels
Easy to use Open Back cavity wall Lintels with perforated base plates formed from galvanised steel which has been powder coated for superb weather, impact and abrasion resistance. The lintels have a built-in Damp-Proof course (DPC) and staggered slots on the inner flange to act as an integral plaster key. They are insulated throughout their length to maximise thermal efficiency and minise cold bridging , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic CXL - Cavity wall lintels
CXL lintels are cavity wall lintels fabricated from a universal beam section. They feature a 6mm base plate and are hot dip galvanised after manufacture. They are available for 50mm to 165mm wide cavities. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic MBA - Solid Wall Single Leaf wall Lintels
Easy to use Solid Wall Single Leaf wall Lintels. The MBA lintels are hot dip galvanised Angles for light duty use (mostly for Meter Boxes) in 102mm exterior walls. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic SSR2 Cold Roof - standing seam roof and wall cladding system
SSR² standing seam roof and cladding is the latest innovation from Catnic. A sustainable pre-finished steel roofing and cladding system designed for the residential and commercial market. SSR² is a fully supported standing seam system, designed, manufactured and CE Marked in accordance with BS EN 14783:2013. SSR² is manufactured from Tata Steel’s Colorcoat HPS200 Ultra® pre-finished steel, making it a cost effective alternative to traditional copper and zinc standing seam roof systems. Seven times lighter than clay or slate tile equivalents, it’s easy to handle on site and quick to fix compared with traditional roofing products. SSR² standing seam roof and wall cladding is lightweight, durable and easy to install. Available in a range of colours, the system provides an original and modern roofline for any property; for pitched roofs as low as 5°. , Roofing systems, Catnic SSR2

Published [03/07/20]

TATA STEEL: Catnic SSR2 Panel - standing seam roof and wall cladding system
SSR² standing seam roof and cladding is the latest innovation from Catnic. A sustainable pre-finished steel roofing and cladding system designed for the residential and commercial market. SSR² is a fully supported standing seam system, designed, manufactured and CE Marked in accordance with BS EN 14783:2013. SSR² is manufactured from Tata Steel’s Colorcoat HPS200 Ultra® pre-finished steel, making it a cost effective alternative to traditional copper and zinc standing seam roof systems. Seven times lighter than clay or slate tile equivalents, it’s easy to handle on site and quick to fix compared with traditional roofing products. SSR² standing seam roof and wall cladding is lightweight, durable and easy to install. Available in a range of colours, the system provides an original and modern roofline for any property; for pitched roofs as low as 5°. , Roofing systems, Catnic SSR2

Published [03/07/20]

TATA STEEL: Catnic SSR2 Plywood Decking - standing seam roof and wall cladding system
SSR² standing seam roof and cladding is the latest innovation from Catnic. A sustainable pre-finished steel roofing and cladding system designed for the residential and commercial market. SSR² is a fully supported standing seam system, designed, manufactured and CE Marked in accordance with BS EN 14783:2013. SSR² is manufactured from Tata Steel’s Colorcoat HPS200 Ultra® pre-finished steel, making it a cost effective alternative to traditional copper and zinc standing seam roof systems. Seven times lighter than clay or slate tile equivalents, it’s easy to handle on site and quick to fix compared with traditional roofing products. SSR² standing seam roof and wall cladding is lightweight, durable and easy to install. Available in a range of colours, the system provides an original and modern roofline for any property; for pitched roofs as low as 5°. , Roofing systems, Catnic SSR2

Published [03/07/20]

TATA STEEL: Catnic SSR2 SIPS - standing seam roof and wall cladding system
SSR² standing seam roof and cladding is the latest innovation from Catnic. A sustainable pre-finished steel roofing and cladding system designed for the residential and commercial market. SSR² is a fully supported standing seam system, designed, manufactured and CE Marked in accordance with BS EN 14783:2013. SSR² is manufactured from Tata Steel’s Colorcoat HPS200 Ultra® pre-finished steel, making it a cost effective alternative to traditional copper and zinc standing seam roof systems. Seven times lighter than clay or slate tile equivalents, it’s easy to handle on site and quick to fix compared with traditional roofing products. SSR² standing seam roof and wall cladding is lightweight, durable and easy to install. Available in a range of colours, the system provides an original and modern roofline for any property; for pitched roofs as low as 5°. , Roofing systems, Catnic SSR2

Published [03/07/20]

TATA STEEL: Catnic SSR2 Warm Roof - standing seam roof and wall cladding system
SSR² standing seam roof and cladding is the latest innovation from Catnic. A sustainable pre-finished steel roofing and cladding system designed for the residential and commercial market. SSR² is a fully supported standing seam system, designed, manufactured and CE Marked in accordance with BS EN 14783:2013. SSR² is manufactured from Tata Steel’s Colorcoat HPS200 Ultra® pre-finished steel, making it a cost effective alternative to traditional copper and zinc standing seam roof systems. Seven times lighter than clay or slate tile equivalents, it’s easy to handle on site and quick to fix compared with traditional roofing products. SSR² standing seam roof and wall cladding is lightweight, durable and easy to install. Available in a range of colours, the system provides an original and modern roofline for any property; for pitched roofs as low as 5°. , Roofing systems, Catnic SSR2

Published [03/07/20]

TATA STEEL: Catnic TH - Thermally Broken Heavy Duty Lintel
Heavy duty thermally broken cavity wall lintel. Catnic’s latest innovation is the biggest shake up in steel lintel design for a generation. An elegant, simplistic design derived from extensive research and rigorous development testing, offering a sophisticated, practical solution to the latest changes in Building Regulations. TBL is a patent pending range providing the most thermally efficient steel lintel solution on the market. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic TS - Thermally Broken Standard Duty Lintel
Standard duty thermally broken cavity wall lintel. Catnic’s latest innovation is the biggest shake up in steel lintel design for a generation. An elegant, simplistic design derived from extensive research and rigorous development testing, offering a sophisticated, practical solution to the latest changes in Building Regulations. TBL is a patent pending range providing the most thermally efficient steel lintel solution on the market. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Catnic TX - Thermally Broken Extra Heavy Duty Lintel
Extra heavy duty thermally broken cavity wall lintel. Catnic’s latest innovation is the biggest shake up in steel lintel design for a generation. An elegant, simplistic design derived from extensive research and rigorous development testing, offering a sophisticated, practical solution to the latest changes in Building Regulations. TBL is a patent pending range providing the most thermally efficient steel lintel solution on the market. , Lintels, Catnic

Published [03/07/20]

TATA STEEL: Celsius 355 CHS - Hot Finished Circular Hollow Sections Grade 355
Celsius® 355 is the product to choose for all critical applications where failure is simply not an option. Available in a wide range of circular, square, rectangular and elliptical hollow sections. The strength and weldable qualities of Celsius 355 mean that it can be used for all structural and mechanical applications, including multi-storey columns, space frames, lattice beams and frames for machinery & trailers. Made exclusively from normalised, fine grain steel with a yield strength of 355 N/mm2, Celsius 355 is fully stress-relieved with uniform mechanical properties and manufactured to the standard grade EN 10210 S355 NH. Other grades, including those with improved impact qualities are available on request. , Structural Hollow Sections, Celsius 355

Published [03/07/20]

TATA STEEL: Celsius 355 EHS - Hot Finished Elliptical Hollow Sections Grade 355
Celsius® 355 is the product to choose for all critical applications where failure is simply not an option. Available in a wide range of circular, square, rectangular and elliptical hollow sections. The strength and weldable qualities of Celsius 355 mean that it can be used for all structural and mechanical applications, including multi-storey columns, space frames, lattice beams and frames for machinery & trailers. Made exclusively from normalised, fine grain steel with a yield strength of 355 N/mm2, Celsius 355 is fully stress-relieved with uniform mechanical properties and manufactured to the standard grade EN 10210 S355 NH. Other grades, including those with improved impact qualities are available on request. , Structural Hollow Sections, Celsius 355

Published [03/07/20]

TATA STEEL: Celsius 355 RHS - Hot Finished Rectangular Hollow Sections Grade 355
Celsius® 355 is the product to choose for all critical applications where failure is simply not an option. Available in a wide range of circular, square, rectangular and elliptical hollow sections. The strength and weldable qualities of Celsius 355 mean that it can be used for all structural and mechanical applications, including multi-storey columns, space frames, lattice beams and frames for machinery & trailers. Made exclusively from normalised, fine grain steel with a yield strength of 355 N/mm2, Celsius 355 is fully stress-relieved with uniform mechanical properties and manufactured to the standard grade EN 10210 S355 NH. Other grades, including those with improved impact qualities are available on request. , Structural Hollow Sections, Celsius 355

Published [03/07/20]

TATA STEEL: Celsius 355 SHS - Hot Finished Square Hollow Sections Grade 355
Celsius® 355 is the product to choose for all critical applications where failure is simply not an option. Available in a wide range of circular, square, rectangular and elliptical hollow sections. The strength and weldable qualities of Celsius 355 mean that it can be used for all structural and mechanical applications, including multi-storey columns, space frames, lattice beams and frames for machinery & trailers. Made exclusively from normalised, fine grain steel with a yield strength of 355 N/mm2, Celsius 355 is fully stress-relieved with uniform mechanical properties and manufactured to the standard grade EN 10210 S355 NH. Other grades, including those with improved impact qualities are available on request. , Structural Hollow Sections, Celsius 355

Published [03/07/20]

TATA STEEL: Colorcoat Urban Cold Roof - standing seam roof and wall cladding system
The Colorcoat Urban® standing seam system is designed for roofs and walls. The system includes the innovative Urban Seam® profile, ideal for houses, apartments, public and commercial buildings, schools and sports pavilions. Its inherent light weight and strength make it ideal for new build, refurbishment, temporary buildings and over-roofing applications. Available in a range of colours designed to blend harmoniously with the landscape the interlocking profiles of the standing seam profile provides an aesthetic visual impact with uninterrupted lines. Colorcoat Urban® is exceptionally durable, produced to rigorous testing to guarantee its performance in different conditions for up to 40 years. , Roofing systems, Colourcoat Urban

Published [03/07/20]

TATA STEEL: Colorcoat Urban Panel - standing seam roof and wall cladding system
The Colorcoat Urban® standing seam system is designed for roofs and walls. The system includes the innovative Urban Seam® profile, ideal for houses, apartments, public and commercial buildings, schools and sports pavilions. Its inherent light weight and strength make it ideal for new build, refurbishment, temporary buildings and over-roofing applications. Available in a range of colours designed to blend harmoniously with the landscape the interlocking profiles of the standing seam profile provides an aesthetic visual impact with uninterrupted lines. Colorcoat Urban® is exceptionally durable, produced to rigorous testing to guarantee its performance in different conditions for up to 40 years. , Roofing systems, Colourcoat Urban

Published [03/07/20]

TATA STEEL: Colorcoat Urban Plywood Decking - standing seam roof and wall cladding system
The Colorcoat Urban® standing seam system is designed for roofs and walls. The system includes the innovative Urban Seam® profile, ideal for houses, apartments, public and commercial buildings, schools and sports pavilions. Its inherent light weight and strength make it ideal for new build, refurbishment, temporary buildings and over-roofing applications. Available in a range of colours designed to blend harmoniously with the landscape the interlocking profiles of the standing seam profile provides an aesthetic visual impact with uninterrupted lines. Colorcoat Urban® is exceptionally durable, produced to rigorous testing to guarantee its performance in different conditions for up to 40 years. , Roofing systems, Colourcoat Urban

Published [03/07/20]

TATA STEEL: Colorcoat Urban SIPS - standing seam roof and wall cladding system
The Colorcoat Urban® standing seam system is designed for roofs and walls. The system includes the innovative Urban Seam® profile, ideal for houses, apartments, public and commercial buildings, schools and sports pavilions. Its inherent light weight and strength make it ideal for new build, refurbishment, temporary buildings and over-roofing applications. Available in a range of colours designed to blend harmoniously with the landscape the interlocking profiles of the standing seam profile provides an aesthetic visual impact with uninterrupted lines. Colorcoat Urban® is exceptionally durable, produced to rigorous testing to guarantee its performance in different conditions for up to 40 years. , Roofing systems, Colourcoat Urban

Published [03/07/20]

TATA STEEL: Colorcoat Urban Warm Roof - standing seam roof and wall cladding system
The Colorcoat Urban® standing seam system is designed for roofs and walls. The system includes the innovative Urban Seam® profile, ideal for houses, apartments, public and commercial buildings, schools and sports pavilions. Its inherent light weight and strength make it ideal for new build, refurbishment, temporary buildings and over-roofing applications. Available in a range of colours designed to blend harmoniously with the landscape the interlocking profiles of the standing seam profile provides an aesthetic visual impact with uninterrupted lines. Colorcoat Urban® is exceptionally durable, produced to rigorous testing to guarantee its performance in different conditions for up to 40 years. , Roofing systems, Colourcoat Urban

Published [03/07/20]

TATA STEEL: ComFlor® 100 - Steel composite decking for composite floors
ComFlor® 100 is a strong long span profile that reduces or eliminates temporary propping irrespective of the frame design. It provides a composite floor slab and is suitable for use with concrete beams or non- composite steel beams. The profile is fully nestable giving low transport and handling costs and provides fast slab installation. , Composite Floor Deck, ComFlor

Published [03/07/20]

TATA STEEL: ComFlor® 210 - Steel composite decking for composite floors
ComFlor® 210 is the original deep composite profile introduced for the first Slimflor systems with wider lower flange steel beams that allow the deck to land on the bottom not the top flange. Cross stiffener technology and the deep profile shape provides a very efficient metal deck and composite slab, with a low usage of concrete. Although it’s especially suited to bear on the extended lower flange of a steel beam, it can also be used on the top flange of a non-composite steel or concrete beam. The nestable profile shape gives low transport and handling costs. , Composite Floor Deck, ComFlor

Published [03/07/20]

TATA STEEL: ComFlor® 225 - Steel composite decking for composite floors
ComFlor® 225 is a high performance combined deep deck specifically designed for Slimdek® and all other integrated steel beam systems. These systems provide a reduced overall floor height with fewer steel beams, a counter intuitive result for such a deep profile. The inclusion of a re-entrant allows for easy service attachment and services can be concealed within the large profile void. The optimised profile design gives superb span capability combined with composite performance with a very small concrete usage. , Composite Floor Deck, ComFlor

Published [03/07/20]

TATA STEEL: ComFlor® 46 - Steel composite decking for composite floors
ComFlor® 46 was our first composite flooring profile, introduced in the early 1980s and is still popular today for its primary characterisics of being nestable, easily transported simple and efficient. It is particularly suited for export or difficult access sites, due to the large area of flooring that will fit into a container and because the deck is fast and easy to lay. , Composite Floor Deck, ComFlor

Published [03/07/20]

TATA STEEL: ComFlor® 51+ - Steel composite decking for composite floors
ComFlor® 51+ is a completely new profile that is the latest evolution of a long line of re-entrant profile design, the favoured profile shape for a vast number of projects in Britain since the 1970's. It provides a virtually flat soffit and the best available composite deck fire performance for both slab and beams. The new embossments give excellent composite slab strength characteristics and the classic re-entrant profile shape the most effective shear stud interaction. Dovetail grooves at 150mm centres provide the best possible anchorage for services underneath. , Composite Floor Deck, ComFlor

Published [03/07/20]

TATA STEEL: ComFlor® 60 - Steel composite decking for composite floors
ComFlor® 60 has been much copied but never bettered, as the original new generation round shouldered trapezoid combined 60 profile. This design is exceptionally resistant to compressive buckling resulting in superior span capability compared to traditional decks. The combined trapezoidal and re-entrant profile provides the benefits of easy service hanging, good shear interaction and long spans together with low concrete and steel useage. Shear studs are placed centrally in the troughs to ensure beneficial placement and the profile is 600mm cover as recommended by Health and Safety guidelines. ComFlor® 60 can be supplied with pre-closed ends , Composite Floor Deck, ComFlor

Published [03/07/20]

TATA STEEL: ComFlor® 80 - Steel composite decking for composite floors
ComFlor® 80 is the big sister to ComFlor® 60 with the same round shoulder combined profile technology applied to an 80 deep trapezoidal shape to give big spans. The use of this profile allows a designer to reduce still further the number of secondary beams in a building to give a cleaner lower cost structure. It allows central stud placement to ensure effective composite beam design and is 600mm cover to give lighter weight sheets in accordance with Health and Safety guidelines. , Composite Floor Deck, ComFlor

Published [03/07/20]

TATA STEEL: ComFlor® E60 - Steel composite decking for composite floors
For given slab depths, ComFlor® E60 requires lower volumes of structural concrete topping than other comparable decks from the UK and possibly in the world. Its advanced design brings a new dimension to the efficient construction of shallow slabs, allowing optimum composte characteristics to be combined with minimum concrete volume. The profile is a full metre in cover width, giving greater coverage of floor area per profile. The profile allows development of efficient, economical composite designs using shear connectors, and takes standard soffit suspension fittings used with other profiles. In short, a simple, well known and effective profile. , Composite Floor Deck, ComFlor

Published [03/07/20]

TATA STEEL: Fischer Profil - Profiles - Cladding Profiles for Architectural Roofing systems
Fischer Profil Roof Cladding Profiles consist of 2 types: FischerTRAPEZ and FischerKLIPTEC . Depending on the profile design, FischerTRAPEZ elements are suited to various applications involving roofs. Their range of geometries and material thicknesses open up a variety of design options for appealing architecture. The FischerKLIPTEC roof system is made up of just one single element. It is swiftly and conveniently installed using Fischer clip connections with no additional cost for accessories or special tools. , Roof Systems, Fischer Profil

Published [03/07/20]

TATA STEEL: Fischer Profil - Profiles - Cladding Profiles for Architectural Wall Cladding systems
Fischer Profil Wall Cladding Profiles consist of 2 types: FischerTRAPEZ and FischePANEEL . Depending on the profile design, FischerTRAPEZ elements are suited to various applications involving walls. Their range of geometries and material thicknesses open up a variety of design options for appealing architecture. Perforated FischerTRAPEZ acoustic profiles are used as the inner sheet whenever the sound level is to be reduced. FischePANEEL allows for easy and fast installation. It is suitable for application as a single-sheet wall element, outside sheet of multi-sheet walls or as a wall cladding material, e.g., for refurbishments. , Wall Systems, Fischer Profil

Published [03/07/20]

TATA STEEL: Fischer Profil FischerTHERM Sandwich Panel - Roofing Panels
Fischer Profil FischerTHERM roof sandwich panel - FischerTHERM is an insulated, visible-fix, architectural roof-cladding panel that is quick and easy to install for fast build times. Adjustment base available. They are an insulated, flat architectural roof-cladding panels that are offered in a wide range of colours with long-term performance. , Roof Systems, Fischer Profil

Published [03/07/20]

TATA STEEL: Fischer Profil FischeTHERM Sandwich Panels - Wall panel system
Fischer Profil FischerTHERM wall sandwich panel - FischerTHERM is an insulated, visible-fix, architectural wall-cladding panel that is quick and easy to install for fast build times. Adjustment base available. They are an insulated, flat architectural wall-cladding panels that are offered in a wide range of colours with long-term performance. , Wall Systems, Fischer Profil

Published [03/07/20]

TATA STEEL: HOLORIB® - Steel composite decking for composite floors
HOLORIB® composite profiles of high-quality corrosion-protected steel have been very successful in the market for decades. The combination of concrete and steel gives composite building structures for floors that optimally combine the advantages of both these construction materials. The sheets are easy to lay, light and slim design, economical. , Composite Floor Deck, HOLORIB

Published [03/07/20]

TATA STEEL: Inflow® CDC - Tata Steel Pipework
Inflow® Cold-formed Dual-Certified (CDC) is a HFW (High Frequency Welded) pressure tube for general pressure and engineering applications. It is produced in accordance with both EN 10217-1 and EN 10219, providing customers with the flexibility to service both pressure and general engineering market applications at ambient temperatures. , Pipework Systems, Inflow & Inflow PLUS

Published [03/07/20]

TATA STEEL: Inflow® Plus 235 - Tata Steel Pipework
Inflow® Plus 235 multi-certified, hot-finished HFW (High Frequency Welded) pressure tube for general purpose and industrial conveyance solutions such as HVAC, steam services, petrochemical, process plant and fire protection applications. , Pipework Systems, Inflow & Inflow PLUS

Published [03/07/20]

TATA STEEL: Inflow® Plus 355 - Tata Steel Pipework
Inflow® Plus 355 is our high strength, multi-certified, hot-finished HFW (High Frequency Welded) pressure tube for general purpose and industrial conveyance solutions such as HVAC, steam services, petrochemical, process plant, fire protection and wear resistance applications. Primary standard EN 10217-3 Grade P355NH , Pipework Systems, Inflow & Inflow PLUS

Published [03/07/20]

TATA STEEL: Inline® 245 - Tata Steel Pipework
Inline® 245 multi-certified, hot-finished HFW (High Frequency Welded) pressure tube for specialist building and engineering services - industrial, process and line pipe solutions. , Pipework Systems, Inline & Inline PLUS

Published [03/07/20]

TATA STEEL: Inline® 265 - Tata Steel Pipework
Inline® 265 multi-certified, hot-finished HFW (High Frequency Welded) pressure tube for specialist building and engineering services - industrial, process and line pipe solutions. , Pipework Systems, Inline & Inline PLUS

Published [03/07/20]

TATA STEEL: Inline® Plus 360 - Tata Steel Pipework
Inline® Plus 360 multi-certified hot-finished, HFW (High Frequency Welded) pressure tube to meet the specific needs and expectations of industrial end-users. Suitable for use in a wide range of applications, including; low pressure gas distribution and installation systems, specialist industrial HVAC and water conveyance, steam services, petrochemical, process plant and on shore gas/line pipe applications. , Pipework Systems, Inline & Inline PLUS

Published [03/07/20]

TATA STEEL: Install® 195 - Tata Steel Pipework
Install® 195 hot-finished tube has been specifically developed for use by industry leaders, and is suitable for widespread conveyance uses – including building and mechanical services, and industrial pressure applications. Install® tube is a robust and reliable building and engineering services solution. , Pipework Systems, Intall & Install PLUS

Published [03/07/20]

TATA STEEL: Install® Plus 235 - Tata Steel Pipework
Install® Plus 235 multi-certified, hot-finished tube has a wide variety of uses; including building and engineering services such as heating and ventilation, air conditioning, pressure systems as well as industrial pipework conveyance. Recognised for its robustness and reliability, Install® Plus tube is the preferred choice for such applications. , Pipework Systems, Intall & Install PLUS

Published [03/07/20]

TATA STEEL: Monopanel - Plank Profiles - Facade Rainscreen Cladding Profiles for Architectural Wall Cladding systems
Our Monopanel Deauville plank profile is a cladding system with hidden fastening, allowing superior aesthetics for architectural façades and thermal insulation from the exterior. They can be used as single skin or in built-up systems , Wall Systems, Monopanel

Published [03/07/20]

TATA STEEL: Monopanel - Roof Profiles - Steel Roof Profiles for Architectural Roofing systems
Our Monopanel trapezoidal and sinusoidal steel profiled sheets are suitable for a wide range of roofing applications. They can be used as single skin or in built-up systems , Wall Systems, Monopanel

Published [03/07/20]

TATA STEEL: Monopanel - Wall Profiles - Facade Cladding Profiles for Architectural Wall Cladding systems
Our Monopanel trapezoidal and sinusoidal steel profiled sheets are suitable for a wide range of wall applications for vertical installation. They can be used as single skin or in built-up systems , Wall Systems, Monopanel

Published [03/07/20]

TATA STEEL: Montana - MONTAFORM® - Facade Cladding Profiles for Architectural Wall Cladding systems
Our MONTAFORM® Design profiles offer you the possibility to put your own ideas into practice. Not only that you can choose between types of metal, colours and coatings – you also decide the profile shape! Our modern machine pool enables us to manufacture virtually any conceivable profiled sheet, making numerous angular or round shapes possible. We have defined some of them as standard; these can be ordered just as they come, or they can serve as the basis or inspiration for your own profile. MONTAFORM® Design profiles are suitable for rear-ventilated metal façades on new buildings as well as for renovation projects. , Wall Systems, Montana

Published [03/07/20]

TATA STEEL: Montana - MONTALINE® - Cladding Profiles for wall
MONTALINE® cladding profiles provide the basis for an elegant façade on which no fasteners can be seen. MONTALINE® cladding profiles are also available with double-sided bended ends. This gives the façade the character of a high-priced flat panel façade. The MONTAFIX® fastening system makes it possible to install the MONTALINE® profiles even more quickly and economically. , Wall Systems, Montana

Published [03/07/20]

TATA STEEL: Montana - MONTANATHERM® Sandwich Panels (PIR) for roof
MONTANATHERM® sandwich roof elements in trapezoidal form. MONTANATHERM® is the predestined construction system for industrial and commercial buildings where rapid building progress, economic efficiency and high insulation value are required. , Roof Systems, Montana

Published [03/07/20]

TATA STEEL: Montana - MONTANATHERM® Sandwich Panels (PIR) for wall
MONTANATHERM® sandwich wall elements with hidden or visible fastening. MONTANATHERM® is the predestined construction system for industrial and commercial buildings where rapid building progress, econimic efficiency and high insulation value are required. , Wall Systems, Montana

Published [03/07/20]

TATA STEEL: Montana - MONTASTEP® - Rebated Profiles for wall
MONTASTEP® rebated façade profiles are suitable for rear-ventilated façades on new and renovated buildings on liner trays or masonry or as complete system installations with heat insulation and corresponding spacers. , Wall Systems, Montana

Published [03/07/20]

TATA STEEL: Montana - MONTATWIN® - Cladding Profiles for wall
With this facade profile, the distances between the individual profile ribs are no longer arranged evenly, which is why the MONTATWIN® facade profile differs substantially from conventional trapezoidal and corrugated profiles. This special arrangement of the profile ribs gives the facade a modern appearance and sets new emphases in modern architecture. , Wall Systems, Montana

Published [03/07/20]

TATA STEEL: Montana - MONTAWALL® Liner Trays for wall
MONTAWALL® liner trays form a variable system of load-bearing liner trays in various finishes, dimensions and lengths. The height and depth of the liner trays can be chosen at will. MONTAWALL® liner trays enable easy, inexpensive design and construction with very good insulation values. The advantages include, in particular, the physical characteristics by means of ventilation, summer heat insulation and almost unlimited design diversity due to various cladding variations. , Wall Systems, Montana

Published [03/07/20]

TATA STEEL: Montana - SWISS PANEL® - Corrugated and trapezoidal profiles for roof
These profiles are suitable for roofs and ceilings, especially on industrial and commercial buildings. Often these profiles are also used in administrative and residential building segments. The various profile designs provide planners and architects with a large number of design possibilities. Additional specialities, like perforated SWISS PANEL® profiles, stimulates the imagination of architects and building designers. , Roof Systems, Montana

Published [03/07/20]

TATA STEEL: Montana - SWISS PANEL® - Corrugated and trapezoidal profiles for walls
These profiles are suitable for façades, especially on industrial and commercial buildings. Often these profiles are also used in administrative and residential building segments. The various profile designs provide planners and architects with a large number of design possibilities. Additional specialities, like perforated SWISS PANEL® profiles, stimulates the imagination of architects and building designers. , Wall Systems, Montana

Published [03/07/20]

TATA STEEL: RoofDek D100 (Deep Deck) - Structural decking for roofs
Deep decks have exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for architecturally interesting large space buildings as they eliminate the need for purlins, but are used in any situation where a strong solid base for the roof is required. Single ply roofs, metal standing seam, asphalt and bitumen roofs all use deep RoofDek, and in recent years they have been the default choice for green roofs, which impose a heavy dead load. When specifying deep decks, designers frequently take advantage of Tata Steel's free diaphragm design service to reduce or eliminate in plane roof bracing. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek D135 (Deep Deck) - Structural decking for roofs
Deep decks have exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for architecturally interesting large space buildings as they eliminate the need for purlins, but are used in any situation where a strong solid base for the roof is required. Single ply roofs, metal standing seam, asphalt and bitumen roofs all use deep RoofDek, and in recent years they have been the default choice for green roofs, which impose a heavy dead load. When specifying deep decks, designers frequently take advantage of Tata Steel's free diaphragm design service to reduce or eliminate in plane roof bracing. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek D153 (Deep Deck) - Structural decking for roofs
Deep decks have exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for architecturally interesting large space buildings as they eliminate the need for purlins, but are used in any situation where a strong solid base for the roof is required. Single ply roofs, metal standing seam, asphalt and bitumen roofs all use deep RoofDek, and in recent years they have been the default choice for green roofs, which impose a heavy dead load. When specifying deep decks, designers frequently take advantage of Tata Steel's free diaphragm design service to reduce or eliminate in plane roof bracing. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek D159 (Deep Deck) - Structural decking for roofs
Deep decks have exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for architecturally interesting large space buildings as they eliminate the need for purlins, but are used in any situation where a strong solid base for the roof is required. Single ply roofs, metal standing seam, asphalt and bitumen roofs all use deep RoofDek, and in recent years they have been the default choice for green roofs, which impose a heavy dead load. When specifying deep decks, designers frequently take advantage of Tata Steel's free diaphragm design service to reduce or eliminate in plane roof bracing. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek D200 (Deep Deck) - Structural decking for roofs
Deep decks have exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for architecturally interesting large space buildings as they eliminate the need for purlins, but are used in any situation where a strong solid base for the roof is required. Single ply roofs, metal standing seam, asphalt and bitumen roofs all use deep RoofDek, and in recent years they have been the default choice for green roofs, which impose a heavy dead load. When specifying deep decks, designers frequently take advantage of Tata Steel's free diaphragm design service to reduce or eliminate in plane roof bracing. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek D210 (Deep Deck) - Structural decking for roofs
Deep decks have exceptional strength and span capability, providing a rugged structural platform for all roofing types. They are ideal for architecturally interesting large space buildings as they eliminate the need for purlins, but are used in any situation where a strong solid base for the roof is required. Single ply roofs, metal standing seam, asphalt and bitumen roofs all use deep RoofDek, and in recent years they have been the default choice for green roofs, which impose a heavy dead load. When specifying deep decks, designers frequently take advantage of Tata Steel's free diaphragm design service to reduce or eliminate in plane roof bracing. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek D32S (Shallow Deck) - Structural decking for roofs
Tata Steel provides the designers needs for efficiency, aethestics and structural performance by offering a comprehensive portfolio of shallow RoofDek profiles. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek D35 (Shallow Deck) - Structural decking for roofs
Tata Steel provides the designers needs for efficiency, aethestics and structural performance by offering a comprehensive portfolio of shallow RoofDek profiles. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek D46 (Shallow Deck) - Structural decking for roofs
Tata Steel provides the designers needs for efficiency, aethestics and structural performance by offering a comprehensive portfolio of shallow RoofDek profiles. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek D60 (Shallow Deck) - Structural decking for roofs
Tata Steel provides the designers needs for efficiency, aethestics and structural performance by offering a comprehensive portfolio of shallow RoofDek profiles. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek HLT130/600 - Structural Liner Tray
Structural liner trays provide a neat planar inner surface, flat except for the stiffening ribs. It is suitable for both roof and wall cladding applications spanning across the main steels and omitting the need for purlins or cladding rails. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek HLT145/600 - Structural Liner Tray
Structural liner trays provide a neat planar inner surface, flat except for the stiffening ribs. It is suitable for both roof and wall cladding applications spanning across the main steels and omitting the need for purlins or cladding rails. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: RoofDek HLT90/600 - Structural Liner Tray
Structural liner trays provide a neat planar inner surface, flat except for the stiffening ribs. It is suitable for both roof and wall cladding applications spanning across the main steels and omitting the need for purlins or cladding rails. , Structural Roofing Systems, RoofDek

Published [03/07/20]

TATA STEEL: SAB - Single cold roof cladding profiles (steel or aluminium)
SAB Cold roof cladding profile for single cladding in steel or aluminium. They are designed for mounting on inclined or round roofs. , Roof Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB - Steel and Aluminium Wall cladding profiles for architectural wall cladding systems
SAB Wall cladding profile for architectural wall cladding. Single cladding or in combination with built-up systems. The profiles are most commonly used horizontally, but can be used vertically too. , Wall Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB Liner Trays - Wall and roof cladding system inner liner
SAB structural liner trays offer freedom when choosing and mounting exterior plating and are very fire-resistant if used with glass wool or rock wool insulation material. They also contribute well to sound insulation, where the option of perforation improves the acoustic properties even more. , Wall Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB Sandwich Panels - Carrier Secret fix wall cladding panel system
SAB sandwich panel - Carrier wall panel system with Secret Fix connections. Can be hung vertically or horizontally. SAB-Carrier panels are as supporting sandwich panels the best solution for ease of construction and aesthetic variety. The panels serve as support construction of an additional shell of example SAB (aesthetic) profiles or sidings. With SAB-Carrier panels a new building can be made quickly and easily well insulated, windproof and waterproof. Afterwards a beautiful and varied appearance can be created. The SAB-Carrier panels are produced with increased foam adhesion and a thicker gauge of the external skin. , Wall Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB Sandwich Panels - Carrier Through fix wall cladding panel system
SAB sandwich panel - Carrier wall panel system with Through Fix connections. Can be hung vertically or horizontally. SAB-Carrier panels are as supporting sandwich panels the best solution for ease of construction and aesthetic variety. The panels serve as support construction of an additional shell of example SAB (aesthetic) profiles or sidings. With SAB-Carrier panels a new building can be made quickly and easily well insulated, windproof and waterproof. Afterwards a beautiful and varied appearance can be created. The SAB-Carrier panels are produced with increased foam adhesion and a thicker gauge of the external skin. , Wall Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB Sandwich Panels - Carrier Trapezoidal Through fix wall cladding panels
SAB sandwich panel - Trapezoidal Carrier Wall panel system with Through Fix connections. Can be hung vertically or horizontally. SAB-Carrier panels are as supporting sandwich panels the best solution for ease of construction and aesthetic variety. The panels serve as support construction of an additional shell of example SAB (aesthetic) profiles or sidings. With SAB-Carrier panels a new building can be made quickly and easily well insulated, windproof and waterproof. Afterwards a beautiful and varied appearance can be created. The SAB-Carrier panels are produced with increased foam adhesion and a thicker gauge of the external skin. , Wall Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB Sandwich Panels - Fire resistance wall cladding panel system
SAB sandwich panel - Wall panel system with Fire resistance. Can be hung vertically or horizontally. Fire resistance sandwich panels are particularly suitable for use in new build and refurbishment projects requiring a high fire resistance grading. This is particularly beneficial in circumstances where the walls of a building are located close to a boundary wall and un situations where reaction to fire is very important as in escape routes and partion walls between compartments in a building. All panels has been tested in the firelaboratorium of Efectis according to the valid European standards. , Wall Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB Sandwich Panels - Roofing Panels
SAB sandwich panel - Roofing panel system. The good properties of the PIR panels are also ideal for use on roofs. They can be delivered with a thickness of 75 mm to 135 mm, depending on the insulation that you desire and so they contribute to creating an even more energy-efficient building. , Roof Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB Sandwich Panels - Secret fix wall cladding panel system
SAB sandwich panel - External wall panel system with Secret Fix connections. Can be hung vertically or horizontally. No screws are visible with this type of panel, as invisible mountings are used. This creates an uncluttered facade that is pleasing to the eye. , Wall Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB Sandwich Panels - Through fix wall cladding panel system
SAB sandwich panel - Wall panel system with Through Fix connections. Can be hung vertically or horizontally. , Wall Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SAB Structural deep deck profiles - Roof structural decking
SAB has a broad range structural deep deck profiles for insulated flat roofs. Deep decks have exceptional strength and span capability, providing a rugged structural platform for all roofing types. They can be used with built up / membrane / Green roof systems. , Structural Roofing Systems, SAB Profiel

Published [03/07/20]

TATA STEEL: SUPERHOLORIB® - Steel composite decking for composite floors
SUPERHOLORIB® composite profiles of high-quality corrosion-protected steel have been very successful in the market for decades. The combination of concrete and steel gives composite building structures for floors that optimally combine the advantages of both these construction materials. The sheets are easy to lay, light and slim design, economical. , Composite Floor Deck, SUPERHOLORIB

Published [03/07/20]

TATA STEEL: Tata Steel - Formawall® - Insulated Composite/Sandwich wall panel
Formawall® is a superior flat faced, secret-fix, insulated wall panel, which is a one fix construction giving a high end architectural appearance. The panel can be laid vertically or horizontally. Available in 70mm, 90mm and 120mm insulation thicknesses and bespoke lengths up to 12m to minimise waste and provide U-values down to 0.17 W/m2K. , Wall Systems, Formawall

Published [03/07/20]

TATA STEEL: Trimapanel® Flat - Insulated Composite/Sandwich wall panel
Trimapanel® flat is an insulated, secret-fix, flat faced wall cladding that is quick and easy to install for fast build times. Available in 70mm, 90mm and 120mm insulation thicknesses and bespoke lengths up to 12m to minimise waste and provide U-values down to 0.17 W/m2K. , Wall Systems, Trimapanel

Published [03/07/20]

TATA STEEL: Trimapanel® FTF System - Insulated Composite/Sandwich wall panel
Trimapanel® FTF is an enhanced panel with the ability to span up to 8m, enabling the product to run horizontally between main frame steelwork or alternatively vertically between base and eaves rails. This not only removes the cost of a secondary steelwork support system but reduces the installation program and removes dust traps, providing a clean and attractive finish to the inside of the building. , Wall Systems, Trimapanel

Published [03/07/20]

TATA STEEL: Trimapanel® micro-rib system - Insulated Composite/Sandwich wall panel
Trimapanel® micro-rib is an insulated, secret-fix, flat architectural wall-cladding panel that is quick and easy to install for fast build times. Available in 70mm, 90mm and 120mm insulation thicknesses and bespoke lengths up to 12m to minimise waste and provide U-values down to 0.17 W/m2K. The range of sizes, shapes, and colours, and the extensive fabrication options, offers a design flexibility that enables architects to create unique and modern design solutions including vertical and horizontal panel installation. The unique secret-fix joint design allows primary fixings to be hidden from view and, together with the micro-rib profile, provides flat external aesthetics. , Wall Systems, Trimapanel

Published [03/07/20]

TATA STEEL: Trisobuild - Horizontal Fire Wall System - Built-up system of colorcoat profiled sheet with internal liner and insulation
Trisobuild™ Horizontal Fire Wall System. Pre-finished steel trapezoidal liner profile run vertically, a Spacer System with vertical bar, an insulation layer and a Colorcoat® pre-finished steel external weathering profile run horizontally to achieve fire resistance rating of 15mins insulation and 240 mins integrity to BS 476 part 22 , Wall Systems, Trisobuild

Published [03/07/20]

TATA STEEL: Trisobuild - Horizontal Wall System - Built-up system of colorcoat profiled sheet with internal liner and insulation
Trisobuild™ Horizontal Wall System. Pre-finished steel trapezoidal liner profile run vertically, a Spacer System with vertical bar, an insulation layer and a Colorcoat® pre-finished steel external weathering profile run horizontally. , Wall Systems, Trisobuild

Published [03/07/20]

TATA STEEL: Trisobuild - Roof System - Built-up system of colorcoat profiled sheet with internal liner and insulation
Trisobuild™ Roof System. Pre-finished steel trapezoidal liner profile, a Spacer System, an insulation layer and a Colorcoat® pre-finished steel external weathering profile. , Roofing systems, Trisobuild

Published [03/07/20]

TATA STEEL: Trisobuild - Roof System with Walkable Liner - Built-up system of colorcoat profiled sheet with internal liner and insulation
Trisobuild™ Roof System with Walkable Liner. Pre-finished steel trapezoidal liner profile, a Spacer System, an insulation layer and a Colorcoat® pre-finished steel external weathering profile. , Roofing systems, Trisobuild

Published [03/07/20]

TATA STEEL: Trisobuild - Sound Absorption Roof System - Built-up system of colorcoat profiled sheet with internal liner and insulation
Trisobuild™ Sound Absorption Roof System. Pre-finished steel trapezoidal liner profile with trough perforations, high density slab, a Spacer System, a low density insulation layer and a Colorcoat® pre-finished steel external weathering profile. , Roofing systems, Trisobuild

Published [03/07/20]

TATA STEEL: Trisobuild - Vertical Fire Wall System - Built-up system of colorcoat profiled sheet with internal liner and insulation
Trisobuild™ Vertical Fire Wall System. Pre-finished steel trapezoidal liner profile, a Spacer System, an insulation layer and a Colorcoat® pre-finished steel external weathering profile to achieve fire resistance rating of 15mins insulation and 240 mins integrity to BS 476 part 22 , Wall Systems, Trisobuild

Published [03/07/20]

TATA STEEL: Trisobuild - Vertical Wall System - Built-up system of colorcoat profiled sheet with internal liner and insulation
Trisobuild™ Vertical Wall System. Pre-finished steel trapezoidal liner profile, a Spacer System, an insulation layer and a Colorcoat® pre-finished steel external weathering profile. , Wall Systems, Trisobuild

Published [03/07/20]

TATA STEEL: Trisomet® Roof System- Insulated Composite/Sandwich roof panel
Trisomet® Roof System is an insulated panel for roof cladding applications and is third party validated for high standards of quality, thermal performance, fire safety, acoustic performance, air-tightness, water penetration and environmental credentials. The wide spaced trapezoidal steel external skin, provides optimum performance for water drainage, strength and walk ability. As a one-fix component, in panel lengths from 300mm to 20m, the precision and consistency of the panel manufacturing process enables fast construction of the building envelope. It is available in 40mm, 60mm, 80mm, 100mm, 120mm and 135mm insulation thicknesses to meet u-values upto 0.15 W/m2K. Also, as a roofing product, Trisomet® allows easy installation of photovoltaics (PVs). , Roof Systems, Trisomet

Published [03/07/20]

TATA STEEL: Trisomet® Wall System - Insulated Composite/Sandwich wall panel
Trisomet® Wall System is an insulated panel for wall cladding applications and is third party validated for high standards of quality, thermal performance, fire safety, acoustic performance, air-tightness, water penetration and environmental credentials. The wide spaced trapezoidal steel external skin, provides optimum performance for water drainage, strength and walk ability. As a one-fix component, in panel lengths from 300mm to 20m, the precision and consistency of the panel manufacturing process enables fast construction of the building envelope. It is available in 40mm, 60mm, 80mm, 100mm, 120mm and 135mm insulation thicknesses to meet u-values upto 0.15 W/m2K , Wall Systems, Trisomet

Published [03/07/20]