CONEX UNIVERSAL LTD: 45 Degree Obtuse Elbow - (P5041 - P4041)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [07/12/2016]

CONEX UNIVERSAL LTD: 45 Degree Obtuse Elbow - (PC5041)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 45 Degree Obtuse Elbow - (PG5041)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 45 Degree Obtuse Elbow - (PH5041)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 45 Degree Obtuse Elbow - (PS5041)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 45 Degree Obtuse Street Elbow - (P5040 - P4040)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 45 Degree Obtuse Street Elbow - (PC5040)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 45 Degree Obtuse Street Elbow - (PG5040)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 45 Degree Obtuse Street Elbow - (PH5040)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 45 Degree Obtuse Street Elbow - (PS5040)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 45 Degree Street Elbow - (PS5001)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 90 Degree Bend - (P5002 - P4090)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 90 Degree Bend - (PC5002)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 90 Degree Bend - (PG5002)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 90 Degree Bend - (PH5002)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 90 Degree Bend - (PS5002)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 90 Degree Bend With Female Thread - (PC4001G)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 90 Degree Bend With Female Thread - (PS4002G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 90 Degree Bend With Male Thread - (P4001G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 90 Degree Bend With Male Thread - (PC4001G)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 90 Degree Bend With Male Thread - (PG4001G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 90 Degree Elbow Female Thread - (PG4090G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 90 Degree Elbow Female Thread - (P4090G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 90 Degree Elbow Female Thread - (PS4090G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 90 Degree Street Bend - (P5001 - P4092)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 90 Degree Street Bend - (PC5001)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: 90 Degree Street Bend - (PG5001)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: 90 Degree Street Bend - (PH5001)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Bend With Male Thread - (PS4001G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Carbon Complete System
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture system created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger with all parts and size. Fittings are also available to download separately if you wish to create your own custom routing preferences within Revit.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Copper Complete System
Features and Benefits:This download is a plumbing fixture system created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger with all parts and size. Fittings are also available to download separately if you wish to create your own custom routing preferences within Revit.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Cross Over Coupler - (PS5088)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Double Check Valve - (1340)
Features and Benefits:Concise design, solid structure.Integral EPDM O-ring on disc assures positive seating at high and low pressures, as well as a long operating life.Extreme resistance to any kind of corrosion.100% unrestricted flow area.This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Check and non-return valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Female Straight Connector - (P4270G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Female Straight Connector - (PC4270G)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Female Straight Connector - (PG4270G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Female Straight Connector - (PH4270G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Fitting Reducer - (P5243 - P4243)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Fitting Reducer - (PC5243)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Fitting Reducer - (PG5243)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Fitting Reducer - (PH5243)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Fitting Reducer - (PS5243)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [09/03/2017]

CONEX UNIVERSAL LTD: Foot Valve - (1461)
Features and Benefits:Concise design, solid structure.Integral EPDM O-ring on disc assures positive seating at high and low pressures, as well as a long operating life.Extreme resistance to any kind of corrosion.100% unrestricted flow area.This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Check valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Gas Complete System
Features and Benefits:This download is a plumbing fixture system created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger with all parts and size. Fittings are also available to download separately if you wish to create your own custom routing preferences within Revit.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Gate Valve With Handwheel - (1120)
Features and Benefits:Inside screw pattern with non rising stem.Designed in accordance with WRAS requirements .High quality brass construction.Not suitable for high temperature working.Available with ISO228 thread to order.Unique Conex handwheel.This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper alloy gate valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Gate Valve With Lockshield - (1121)
Features and Benefits:Inside screw pattern with non rising stem.Designed in accordance with WRAS requirements .High quality brass construction.Not suitable for high temperature working.Available with ISO228 thread to order.Unique Conex handwheel.This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper alloy gate valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Globe Valve - (1130)
Features and Benefits:Inside screw pattern with non rising stem.Designed in accordance with WRAS requirements .High quality brass construction.Not suitable for high temperature working.Available with ISO228 thread to order.Unique Conex handwheel.This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper alloy globe valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Horizontal Lift Check Valve - (1360)
Features and Benefits:Concise design, solid structure.Integral EPDM O-ring on disc assures positive seating at high and low pressures, as well as a long operating life.Extreme resistance to any kind of corrosion.100% unrestricted flow area.This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Check and non-return valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Inox Complete System
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture system created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger with all parts and size. Fittings are also available to download separately if you wish to create your own custom routing preferences within Revit.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Male Straight Connector - (P4243G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Male Straight Connector - (PC4243G)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Male Straight Connector - (PG4243G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Male Straight Connector - (PH4243G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Male Straight Connector - (PS4243G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [09/03/2017]

CONEX UNIVERSAL LTD: Male Street Bend - (PC5030)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Male Street Bend - (PS5030)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [09/03/2017]

CONEX UNIVERSAL LTD: Press Tee Equal - (P5130 - P4130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Press Tee Equal - (PC5130)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Press Tee Equal - (PG5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Press Tee Equal - (PH5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Press Tee Equal - (PS5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [09/03/2017]

CONEX UNIVERSAL LTD: Press Tee Reduced Both Ends - (PC5130)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Press Tee Reduced Both Ends (P5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Press Tee Reduced Branch - (P5130 - P4130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Press Tee Reduced Branch - (PC5130)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Press Tee Reduced Branch - (PG5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Press Tee Reduced Branch - (PH5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Press Tee Reduced Branch - (PS5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [09/03/2017]

CONEX UNIVERSAL LTD: Press Tee Reduced End - (P5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Press Tee Reduced End - (PG5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Quarter Turn Ball Valve - (1200)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Ball valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Quarter Turn Ball Valve With Tee Handle - (1205)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Ball valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Reduced End And Branch - (P5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Reduced End And Branch - (PG5130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Reduced Straight Coupler - (P5240)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Slip Coupler - (P4275)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Slip Coupler - (PC4275)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Slip Coupler - (PG4275)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Slip Coupler - (PS4275)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [09/03/2017]

CONEX UNIVERSAL LTD: Solar Complete System
Features and Benefits:This download is a plumbing fixture system created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger with all parts and size. Fittings are also available to download separately if you wish to create your own custom routing preferences within Revit.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Spring Check Non Return Valve - (1451)
Features and Benefits:Concise design, solid structure.Integral EPDM O-ring on disc assures positive seating at high and low pressures, as well as a long operating life.Extreme resistance to any kind of corrosion.100% unrestricted flow area.This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Check and non-return valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Stop End - (P5301)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Stop End - (PC5301)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Stop End - (PG5301)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [01/03/2017]

CONEX UNIVERSAL LTD: Stop End - (PS5301)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [09/03/2017]

CONEX UNIVERSAL LTD: Straight Coupler - (P5270)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Straight Coupler - (PC5270)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Straight Coupler - (PG5270)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Straight Coupler - (PH5270)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Solar Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Straight Coupler - (PS5270)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [09/03/2017]

CONEX UNIVERSAL LTD: Swing Check Valve - (1470)
Features and Benefits:Concise design, solid structure.Integral EPDM O-ring on disc assures positive seating at high and low pressures, as well as a long operating life.Extreme resistance to any kind of corrosion.100% unrestricted flow area.This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Check and non-return valves

Published [09/03/2017]

CONEX UNIVERSAL LTD: Tee With Female Threaded Branch - (P4130G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Copper Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [01/03/2017]

CONEX UNIVERSAL LTD: Tee With Female Threaded Branch - (PC4130)
Conex >B< Press Carbon fittings are user friendly and very quick to install, leading to savings on labour costs. It also offers the advantage of a flame free installation, therefore posing no fire risk. Conex >B< Press Carbon is a versatile press fitting system for use on Carbon tubes in accordance with EN 10305-3.Our >B< Press Carbon is installed, with a mechanical press tool with a compatible jaw with a >B< profile to fit each size of fitting required. When pressure is exerted through the press tool the joint is permanently made and the fitting cannot be dismounted or re-used. The >B< Press Carbon system eliminates the need for solder, adhesives or additional jointing materials. The >B< profile has the advantage of a 3 Point Press, two mechanical presses either side of the bead and one hydraulic press crimping the o-ring. This provides a more secure joint.Pressing Indicator FeatureIBP has developed a unique pressing indicator, a specially designed EPDM O-ring. It has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar). When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path.Therefore there is no need to go to full test pressure to check that all fittings have been pressed. This >B< Press Carbon feature is available in fittings sized 12-108mm and suitable for HVAC, hot and cold applications.This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Carbon Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/03/2017]

CONEX UNIVERSAL LTD: Tee With Female Threaded Branch - (PG4130G)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Gas Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [08/12/2016]

CONEX UNIVERSAL LTD: Tee With Female Threaded Branch - (PS4130)
Features and Benefits:This download is a plumbing fixture component created by bimstore.co.uk for the >B< Press Inox Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Copper pipeline fittings

Published [09/03/2017]

CONEX UNIVERSAL LTD: Y Pattern Strainer - (1802)
Features and Benefits:Designed in accordance with WRAS requirement and BS 6282-1 Standards.ISO 228 parallel female ends.PN 16 from -10° to 85°C.Specifically designed to be used with water.Prevents back siphonage.Manufactured in accordance with BS EN 13959.This download is a plumbing fixture component created by bimstore.co.uk for the Valves Range from Conex Bänninger.This component is created in Revit 2015 for use in MEP systems and is in line with 2015 industry standards. Check and non-return valves

Published [09/03/2017]