GDHV VENTILATION - GLEN DIMPLEX HEATING & VENTILAT
MILLBROOK HOUSE
GRANGE DRIVE
EDGE END
SOUTHAMPTON
HAMPSHIRE SO30 2DF
Tel: 0344 879 3587
Fax:
These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.
GDHV VENTILATION - GLEN DIMPLEX HEATING & VENTILAT: Edel Hot Water Heat Pump - Air to water heat pumps - Hot Water Heat Pump
Edel heat pump cylinders comprise of a stainless steel inner vessel with a hot water heat pump mounted on top. The heat pump produces hot water very efficiently by extracting heat from external air supplied via insulated ductwork, which is available as an accessory. This highly efficient cylinder reduces the dwelling emissions in SAP making it possible to pass using electric space heating and an Edel heat pump cylinder. Edel cylinders feature RF connectivity and can be controlled remotely when connected to a DimplexHub.Features and benefits:Internet-connected smartphone app connectivity* (*additional Gateway required).The Edel heat pump consumes five times less electricity than standard electric water heated cylinders.Helps to pass Part L of building regulations when specifying electric heating.Compact 630 mm diameter units, available in 200 L or 270 L hot water capacity cylinder options.Stainless steel tank with five year guarantee, no sacrificial anode requirement.Very quiet in operation due to soundproof hood housing, variable speed fan and the rotary compressor being mounted on anti-vibration pads.Patented high performance heat exchanger with defrost mode operation in UK climates.
Electric storage water heaters
Published [30/03/2026]
GDHV VENTILATION - GLEN DIMPLEX HEATING & VENTILAT: FX20VEW/ FX20WIPX4 Downflow Fan
FX20VEW and FX20WIPX4 are wall-mounted fan heaters. Featuring ConfigR app compatibility, users and installers can easily set heating durations and schedules. These heaters offer simple pull-cord operation for quick manual control, while advanced scheduling and temperature management are available through the app. It provides variable heat output options of 1 kW and 2 kW, ensuring flexibility for different room sizes and heating needs. The FX20WIPX4 has an IP24 rating; it offers basic protection against solid objects and light water drips. Compliant with Lot 20 of the ERP Directive 2025, this heater meets the latest energy efficiency standards. Alongside it is BEAB approved and CE marked, ensuring safety, reliability, and quality.Features and benefits:Adjustable output at time of installation (1 kW or 2 kW).Onboard Manual mode available after commissioning; pull cord operation.Advanced settings via ConfigR App; user programmable temperatures with seven-day timer.Thermal cutouts for fail-safe protection.Same size and fixings points as previous Dimplex FX heaters.
Room heaters
Published [30/03/2026]
GDHV VENTILATION - GLEN DIMPLEX HEATING & VENTILAT: PLXE Panel Heater Range
The PLX050E is a Lot 20 compliant, modern and efficient electric panel heater. Features intuitive controls with multiple timers, natural white colour and louvered grille. Features and benefits:Electronic time and temperature control ensures maximum comfort.Integral open-window detection system reduces waste heat.Electronic thermostat accurate to within 0.2°C.Smartphone app controllable via the Dimplex Control system.Slimline design that covers traditional panel heater fixing marks.Easy to install.
Room heaters
Published [30/03/2026]
GDHV VENTILATION - GLEN DIMPLEX HEATING & VENTILAT: QRAD RF Electric Radiator Range
Q-Rad features intuitive user controls, allowing programming of multiple seven-day timber profiles via a backlit LCD display and capacitive buttons.Features and benefits:Highly accurate electronic thermostatic.Advanced controls with cap-sense technology for total flexibility of heating.Convected heat for rapid warm up, radiant heat for added comfort.Styling to match the Quantum range of off-peak heaters.CE and BEAB certified.Supplied with a two year warranty.
Room heaters
Published [30/03/2026]
GDHV VENTILATION - GLEN DIMPLEX HEATING & VENTILAT: Quantum RF Range - Storage Heater
Quantum RF is an advanced high heat retention electric storage heater with a clean look and reliable performance. Quantum RF provides low cost, low carbon, electric heating and temperature control.Features and benefits:Built-in RF module as standard.Complies with Lot 20 of ERP Directive.Meets criteria for SAP high heat retention storage heater.Customisable heating with four time and temperature settings per day.Dynamic, intelligent charge calculation stores only the energy you need.Adaptive start pre-heating and open window detection auto-shutdown.Smartphone app controllable via the Dimplex Control system.Requires energy cell packs to function. Item: 047243 (included with purchase).
Thermal storage heaters
Published [30/03/2026]
GDHV VENTILATION - GLEN DIMPLEX HEATING & VENTILAT: XLE Storage Heater Range
An advanced electric storage heater with a clean look and reliable performance. XLE storage heaters provide an upgraded and compliant replacement for older storage heaters.Features and benefits:Complies with Lot 20 of ERP Directive.Programmable room temperatures with a seven-day timer.Efficient heating system with low running costs delivered by maximising the use of off-peak tariffs.Dynamically stores the right amount of energy to heat a room.Controllable electronic heat output to match user lifestyle.Fan assisted to quickly, quietly and more effectively distribute heat.Supplied with 40 mm feet for weight distribution when secured to wall. Two feet positions available.Slimline design that covers traditional storage heater fixing marks.Requires Energy Cell Packs to function Item: 047243 (included with purchase).
Thermal storage heaters
Published [30/03/2026]
GDHV VENTILATION - GLEN DIMPLEX HEATING & VENTILAT: Zeroth - Water-to-Water Heat Pump Range (4,6,9kW)
The Zeroth Heat Pump comes in two sizes, 4kW and 6kW. The integrated cylinder is made from stainless steel with a heat pump mounted underneath, in a removable module, which includes an inbuilt heating system circulation pump and either an inbuilt PIC valve or circulation pump/two port valve for the energy loop (varies on model type). The outer casing is made from painted white steel formed around a rigid frame, with adjustable feet. The heat pump can produce heating or hot water very efficiently as it extracts energy from an energy loop at 25 degrees. The end user controls are mounted flush on the front and all pipework and cable entries are on the top of the unit, except for a drain hose (connected at the back) and the discharge which can be piped left or right, through the knockout.Features and benefits:Provides DHW and heating for new build dwellings.Compact unit with 550 x 560 mm footprint, suitable for integrated kitchen or cupboard installation.Stainless steel tank with no requirement for sacrificial anode.Very quiet operation due to free swinging compressor base plate, inverter compressor, variable speed pumps, acoustic insulation and flexible pipework connections.Use with an energy loop reduces overheating risk and improves building energy performance.Prewired and pre-plumbed, simplifying the installation.Available with an inbuilt source pump and two port valve or PIC valve.
Water-to-water heat pumps
Published [30/03/2026]
