AUTOPA LTD

COTTAGE LEAP
OFF BUTLERS LEAP
RUGBY
WARWICKSHIRE CV21 3XP

Tel: 01788 550556
Fax: info@autopa.co.uk

Company Logo

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. You should check with the supplier before specifying or purchasing products.

AUTOPA LTD: ACP4
Column protector with two square posts and 400 mm internal width.Functional and robust in design, AUTOPA’s range of column protectors are designed to protect corners, columns, and other vulnerable pillars from vehicle damage in a busy industrial environment.Features and benefits:Column Protectors are manufactured from mild steel and galvanized to ensure their longevity.Column Protectors are available in galvanized and galvanized and coated (RAL/BS numbers must be specified at time of order).Optional reflective tape can be added to maximize visibility.48 mm diameter tube.Concrete in 300 mm (below ground).50 x 50 mm square tube uprights.Installation:Bolt down to a suitable concrete surface.Concrete in is supplied with welded fixing spikes to ensure firm ground anchorage into concrete.Concrete in requires a suitable excavated hole for installing into concrete. Carbon steel hoops

Published [30/03/2026]

AUTOPA LTD: GFC9000i
The AUTOPA GFC9000i is a commercial and public standard illuminated bollard. The highly robust construction and design are manufactured to all relevant standards thus ensuring the longevity of the GFC9000i in the most challenging environments.Features and benefits; The 19W IP65 Corn Lamp LED is housed in an aluminium light diffuser which is protected by a polycarbonate sleeve and opaque lens.Lamp colour temperature - 6500KLuminous flux - 2600LmLamp dimensions - 155mm length x 65mm diameterThe GFC9000i is available in a ragged only finish and is available in black (as standard) or a range of RAL colours.Installation:Ragged bollards require a hole of at least 500 mm deep for casting into concrete.Ragged bollards are supplied with welded fixing spikes to ensure firm ground anchorage.The GFC9000i requires connecting to mains 240v AC electricity. This work MUST be completed by a suitably qualified electrician. Steel lighting bollards

Published [30/03/2026]

AUTOPA LTD: Haxby Canopy
The AUTOPA Haxby Canopy is a lightweight canopy designed to be fixed to a wall to provide some protection from the elements.Features and benefits:The Haxby Canopy is coated RAL7016 anthracite grey as standard, but is available in a range of RAL colours to suit existing colour schemes. For colour coated options RAL numbers must be supplied at time of order.The Haxby Canopy is fabricated from aluminium and PETG clear sheet and is available in four sizes; 1200 mm, 1500 mm, 1800 mm, and 2100 mm.Galvanized steel inner wall brace.13 mm bolt hole.4 mm clear PETG sheet.1015 mm projection from wall.Installation: The canopy must be bolted to a sound wall by means of four 10 mm bolts. Open-sided shelters

Published [30/03/2026]

AUTOPA LTD: Perimeter Barriers - Removable Padlockable
Perimeter Barriers are designed to help secure site perimeters and provide a permanent obstacle to vehicle access, to mark boundaries, define trolley parks and protect vulnerable door entrances and exits.Suited to sites where aesthetics and security are equally important, perimeter barriers are commonly found outside car showrooms acting as protection for the cars on the forecourt without impeding a customer’s view of the vehicles.Removable perimeter barriers are particularly suitable for locations where occasional access is required, the simple tab and padlock system provides an easy to operate solution for locking the barrier in place.Features and benefits:Available in a variety of heights and widths.Removable for occasional access.Galvanized, Stainless steel, galvanized and colour coated available.Tube diameters 48 mm, 60 mm, 76 mm and 90 mm available.Colour coated options available extra.Removable, secured with padlock, available extra.Installation:Removable barriers are supplied with welded fixing spikes to ensure firm ground anchorage into concrete.Removable barriers require a suitable excavated hole for installing into concrete.Each leg of the barrier requires a hole of approximately 400 mm³ and then concreted in for installation. Carbon steel hoops

Published [30/03/2026]

AUTOPA LTD: Plain Bollard Black & Yellow - Round
The AUTOPA range of Black & Yellow bollards.Features and benefits:All products in the range are galvanized mild steel, ensuring their longevity and are designed to take the knocks and bumps that occur in all warehouse environments.The Bollards are 900 mm, 1000 mm, 1200 mm and 1500 mm tall; 400 mm and 500 mm below ground for casting into concrete (1200 mm, 1400 mm, 1600 mm and 2000 mm overall); 900 mm, 1000 mm, 1200 mm and 1500 mm tall bolt down.The bollard is coated Black with two or three x 150 mm reflective yellow bands spaced at 200 mm.Galvanized mild steel, coated black with yellow reflective bands.Installation:It is recommended that posts are placed no further then 1200 mm apart to ensure no vehicle can pass between the posts.Concrete In Black and Yellow bollards require an excavated hole (no less than 400 mm (500 mm for 1500 mm height) deep and 600 mm diameter) for installation.Bolt down Black and Yellow bollards require bolting down to a suitable concrete surface. Carbon steel bollards

Published [30/03/2026]

AUTOPA LTD: Plain Bollard Galvanised - Square
AUTOPA’s range of Plain Square Bollards offers a simple and cost effective means of establishing control over parking and access.Features and benefits:The complete range of Plain Square Bollards are available in diameters from 50 mm² to 150 mm² and are available with extended legs for casting into concrete or with a flange plate for bolting down.Colour coated and removable versions are also available.Reflective bands available.Supplied with welded flat steel cap.Loose cap available for filling with concrete on site.Bolt Down version available.Concrete In bollards 400mm below ground.Installation:Concrete In Plain bollards require an excavated hole (no less than 400 mm³) for installation.AUTOPA recommends that bollards are placed no further than 1200 mm apart to ensure that no vehicle may pass between them.Bolt down to a suitable concrete surface. Carbon steel bollards

Published [30/03/2026]

AUTOPA LTD: Rockingham Bench
With a simple and stylish design the Rockingham Bench from AUTOPA is ideal for busy public areas such as schools and shopping centres.Features and benefits:Manufactured from galvanized mild steel as standard, it will look good for years with only minimal maintenance.Supplied concrete in or bolt down, the bench is available in stainless steel and colour coated versions (please state BS/RAL number at time of order).Galvanized/galvanized & coated finish complete with plastic end caps.Available in Stainless Steel (Grade 304)Installation:Supplied fully welded for easy installation on site.The Rockingham Bench requires a trench of a least 1000 x 600 x 300 mm deep for casting into concrete.Clean off any concrete splashes after installation.Always allow sufficient time for concrete to cure before usage.Bolt down versions require bolting to an appropriate concrete surface by means of 12mm bolts Street and site benches

Published [30/03/2026]

AUTOPA LTD: Sheffield Cycle Stand - Galvanised
The tubular cycle stand, a familiar sight throughout the UK, allows the frame of the bicycle to be secured by the users own security lock.Features and benefits;The practical and durable nature of the AUTOPA Sheffield cycle stand ensures it has been consistently recommended by cycling groups since its introduction in the 1990’s.Available flanged for bolting down, or ragged for casting into concrete.Ragged version 300 mm below ground.48 mm diameter.Installation:Bolt down cycle stand require bolting to established concrete (no less than 300 mm³) by means of six M12 bolts per stand.Concrete in cycle stands require an excavated hole (no less than 300 mm³) for installation.Allow 800-1000mm between stands and a minimum of 450 mm from any obstruction. Carbon steel cycle stands

Published [30/03/2026]

AUTOPA LTD: Sheffield Cycle Stand - Stainless Steel
The tubular cycle stand, a familiar sight throughout the UK, allows the frame of the bicycle to be secured by the users own security lock.Features and benefits;The practical and durable nature of the AUTOPA Sheffield cycle stand ensures it has been consistently recommended by cycling groups since its introduction in the 1990’s.Available flanged for bolting down or ragged for casting into concrete.Concrete in version 300 mm below ground.48 mm diameter.Available with stainless steel locking point, approved by Sold Secure.Installation:Bolt down cycle stand require bolting to established concrete (no less than 300 mm³) by means of six M12 bolts per stand.Concrete in cycle stands require an excavated hole (no less than 300 mm³) for installation.Allow 800-1000 mm between stands and a minimum of 450 mm from any obstruction. Stainless steel cycle stands

Published [30/03/2026]