H+H UK LTD: Celcon Block, High Strength Grade - Aircrete
High strength, aerated autoclaved concrete blocks available in a range of thicknesses.Features and benefits:BBA certified.High compressive strength.Fire resistant. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Celcon Block, Super Strength Grade - Aircrete
Super strength, aerated autoclaved concrete blocks available in a range of thicknesses.Features and benefits:BBA certified.High compressive strength.Fire resistant. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Celcon Foundation Block, High Strength Grade - Aircrete
High strength, aerated autoclaved concrete foundation blocks available in a range of thicknesses. Foundation blocks may also be used above ground for solid wall construction.Features and benefits:Enhanced thermal performance: their use reduces heat loss from ground floors.Frost resistance: they have exceptionally good resistance to freeze/thaw conditions.Lightweight: they weigh one third of an equivalent dense aggregate block.Reduced costs: an independent report by Davis Langdon LLP, concludes Celcon Foundation Blocks are up to 26% cheaper than dense aggregate blocks.Speed of construction: Enable a quick and reliable construction as only one wall has to be set out and there is no need for wall ties or lean mix fill. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Celcon Plus Block, High Strength Grade - Aircrete Block
Longer, high strength, aerated autoclaved concrete blocks produced using the latest manufacturing technology.Features and benefits:Ranked amongst the most dimensionally accurate blocks available.Ideal for use with H+H’s Thin-Joint System.BBA Certified.Fire resistant.Available in a range of thicknesses. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Celcon Plus Blocks Super Strength Grade - Aircrete
Longer, super strength, aerated autoclaved concrete blocks produced using the latest manufacturing technology.Features and benefits:Ranked amongst the most dimensionally accurate blocks available.Ideal for use with H+H’s Thin-Joint System.BBA certified.Fire resistant.Available in a range of thicknesses. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Celcon Vertical Wall Panel - Aircrete
Celcon Vertical Wall Panels are storey-high aircrete panels - fabricated offsite and craned into place for a fast, panelised building system with the reassuring characteristics of a high-performance, durable, masonry structure.Celcon Vertical Wall Panels are manufactured in a range of heights with a width of 600 mm and a thickness of 100 mm.Vertical Wall Panels are craned into place onto a bed of H+H element mortar – a fast-setting and very strong thin-layer mortar developed especially for use with the panels. Features and benefits:Rapid build.Cost effective.High acoustic, thermal and airtight performance.Increased speed of build.Aircrete is a durable material. Walls will have a durability equivalent to that of traditional masonry (in excess of 60 years). Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Celcon Vertical Wall Panels
Vertical Wall Panels can be used in housing as well as commercial or mixed tenure projects. Suitable for internal partition and the internal leaf of an external wall, the products offer solutions to meet the requirements of the Building Regulations for education, health, care homes, retail outlets, hotels, commercial buildings, leisure, offices as well as housing (social and private).H+H Vertical Wall Panjels are made to extremely tight manufacturing dimensional tolerances, supplied specifically for use with a combination of ancillary products which all complement the 2mm joint of Celfix, our thin layer mortar, with no leveling required. This ensures a quality and quick build with little or no site wastage.Vertical Wall Panels have also been successfully used in the construction of Zero Carbon houses, Level 6 in the Code for Sustainable Homes (CfSH), proving that aircrete is a very viable option in the provision of sustainable construction of future homes.This download is a Wall system component created by bimstore.co.uk for H+H UK Limited.This component is created in Revit 2014 for use in Wall systems and is in line with 2015 industry standards. Autoclaved aerated concrete (AAC) blocks

Published [01/06/2016]

H+H UK LTD: High Strength Grade
Available in Standard Grade (3.6N/mm²) and High Strength Grade (7.3N/mm²), Foundation Blocks can be used to support 3 storey constructions. They are suitable for the support of solid or cavity walls, framed construction or suspended floors, including beam and block.Celcon Block High Strength Grade is extremely versatile and can be used below DPC, as well as loadbearing walls above ground which demand higher structural performance.The Plus range is produced using the latest manufacturing technology which rank them amongst the most dimensionally accurate blocks available, making them ideal for use with H+H UK's Thin-Joint System.H+H Multi Plates are a new generation of aircrete products that build on the efficiency of thin layer construction.Jumbo Bloks are produced with the latest technology, offering a high degree of dimensional accuracy with sharp arises, which make them ideal for use with Celfix mortar.This download is a Wall system component created by bimstore.co.uk for H+H UK Limited.This component is created in Revit 2014 for use in Wall systems and is in line with 2015 industry standards. Autoclaved aerated concrete (AAC) blocks

Published [31/03/2016]

H+H UK LTD: Jumbo Blok, High Strength Grade - Aircrete
Larger, standard grade, aerated autoclaved concrete blocks offering beneficial productivity, with as few as 6.3 blocks completing 1m² of walling.Features and benefits:Enhances the speed of build on site.A high degree of dimensional accuracy.Ideal for use with Celfix mortar.Ideal for use with H+H’s Thin-Joint System.BBA certified.Fire resistant.Available in a range of thicknesses. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Jumbo Blok, Super Strength Grade - Aircrete
Larger, super strength, aerated autoclaved concrete blocks offering beneficial productivity, with as few as 6.3 blocks completing 1 m² of walling.Features and benefits:Enhances the speed of build on site.A high degree of dimensional accuracy.Ideal for use with Celfix mortar.Ideal for use with H+H’s Thin-Joint System.BBA Certified.Fire resistant.Available in a range of thicknesses. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Solar Grade
Solar Grade Celcon Blocks are suitably loadbearing for two storey buildings and can be used below DPC. H+H's Solar Grade has a compressive strength of 2.9N/mm2 and is third party accredited for use in the applications listed.The Plus range is produced using the latest manufacturing technology which rank them amongst the most dimensionally accurate blocks available, making them ideal for use with H+H UK's Thin-Joint System.Jumbo Bloks are produced with the latest technology, offering a high degree of dimensional accuracy with sharp arises, which make them ideal for use with Celfix mortar.This download is a Wall system component created by bimstore.co.uk for H+H UK Limited.This component is created in Revit 2014 for use in Wall systems and is in line with 2015 industry standards. Autoclaved aerated concrete (AAC) blocks

Published [31/03/2016]

H+H UK LTD: Solar Grade Celcon Block - Aircrete
Solar grade, aerated autoclaved concrete blocks available in a range of thicknesses.Features and benefits:BBA certified.Fire resistant.High thermal efficiency. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Solar Grade Celcon Plus Block - Aircrete
Longer, solar grade, aerated autoclaved concrete blocks produced using the latest manufacturing technology.Features and benefits:Ranked amongst the most dimensionally accurate blocks available.Ideal for use with H+H’s Thin-Joint System.BBA certified.Fire resistant.Available in a range of thicknesses. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Solar Grade Jumbo Block - Aircrete
Larger, solar grade, aerated autoclaved concrete blocks offering beneficial productivity, with as few as 6.3 blocks completing 1 m² of walling.Features and benefits:Enhances the speed of build on site.A high degree of dimensional accuracy.Ideal for use with Celfix mortar.Ideal for use with H+H’s Thin-Joint System.BBA certified.Fire resistant.Available in a range of thicknesses. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Standard Grade
They are suitable for the support of solid or cavity walls, framed construction or suspended floors, including beam and block.Celcon Block Standard Grade is extremely versatile and can be used below DPC as infill for Beam and Block flooring systems, as well as above the ground in the walling applications listed.The Plus range is produced using the latest manufacturing technology which rank them amongst the most dimensionally accurate blocks available, making them ideal for use with H+H UK's Thin-Joint System.H+H Multi Plates are a new generation of aircrete products that build on the efficiency of thin layer construction.Jumbo Bloks are produced with the latest technology, offering a high degree of dimensional accuracy with sharp arises, which make them ideal for use with Celfix mortar.This download is a Wall system component created by bimstore.co.uk for H+H UK Limited.This component is created in Revit 2014 for use in Wall systems and is in line with 2015 industry standards. Autoclaved aerated concrete (AAC) blocks

Published [31/03/2016]

H+H UK LTD: Standard Grade – Celcon Foundation Block
Standard strength, aerated autoclaved concrete foundation blocks available in a range of thicknesses. Foundation Blocks may also be used above ground for solid wall construction.Features and benefits:Enhanced thermal performance: their use reduces heat loss from ground floors.Frost resistance: they have exceptionally good resistance to freeze/thaw conditions.Lightweight: they weigh one third of an equivalent dense aggregate block.Reduced costs: an independent report by Davis Langdon LLP, concludes Celcon Foundation Blocks are up to 26% cheaper than dense aggregate blocks.Speed of construction: Enable a quick and reliable construction as only one wall has to be set out and there is no need for wall ties or lean mix fill. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Standard Grade Celcon Block - Aircrete
Standard strength, aerated autoclaved concrete blocks available in a range of thicknesses.Features and benefits:BBA certified.Fire resistant. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Standard Grade Celcon Plus Block - Aircrete
Longer, standard strength, aerated autoclaved concrete blocks produced using the latest manufacturing technology.Features and benefits:Ranked amongst the most dimensionally accurate blocks available.Ideal for use with H+H’s Thin-Joint System.BBA certified.Fire resistant. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Standard Grade Jumbo Blok - Autoclaved Aerated Concrete
Larger, standard grade, aerated autoclaved concrete blocks offering beneficial productivity, with as few as 6.3 blocks completing 1 m² of walling.Features and benefits:Enhances the speed of build on site.A high degree of dimensional accuracy.Ideal for use with Celfix mortar.Ideal for use with H+H’s Thin-Joint System.BBA certified.Fire resistant.Available in a range of thicknesses. Autoclaved aerated concrete (AAC) blocks

Published [04/04/2024]

H+H UK LTD: Super Strength Grade
Celcon Block Super Strength Grade is extremely versatile and can be used below DPC, as well as loadbearing walls above ground which demand higher structural performance.The Plus range is produced using the latest manufacturing technology which rank them amongst the most dimensionally accurate blocks available, making them ideal for use with H+H UK's Thin-Joint System.Jumbo Bloks are produced with the latest technology, offering a high degree of dimensional accuracy with sharp arises, which make them ideal for use with Celfix mortar.H+H Multi Plates are a new generation of aircrete products that build on the efficiency of thin layer construction.This download is a Wall system component created by bimstore.co.uk for H+H UK Limited.This component is created in Revit 2014 for use in Wall systems and is in line with 2015 industry standards. Autoclaved aerated concrete (AAC) blocks

Published [31/03/2016]