SCHIEDEL CHIMNEY SYSTEMS LTD
CROWTHER INDUSTRIAL ESTATE
TYNE & WEAR NE38 0AQ
Tel: 0191 416 1150
Fax: 0191 415 1263
External ICID Plus Chimney with Retrofit Wall Supports & Double Wall Adjustable
An excellent example of how easy it is to install a wood burning stove into a new build, or existing house where it's not viable to have an internal chimney. The disruption is reduced as only one external hole is needed for the chimney flue pipe, which goes up the side of the wall to the roof.
Schiedel - Metaloterm US Concentric Flue System
The Metaloterm® US system is a modular concentric balanced flue system, made of stainless steel which combines air inlet and flue. Metaloterm® US is suitable for high temperature, non-condensing applications with flue gasses in negative pressure. It can be applied on all types of balanced flue gas-fired stoves. This superb animation shows how easy it is to install with an inset stove and a horizontal terminal.
Schiedel Commercial installation the HP5000 chimney exhaust system
This video shows a number of installation options using the HP5000 exhaust system in a commercial building. HP 5000 has an extensive range of twin and single wall components with 25mm and 50mm cavity insulation, giving it the versatility required to meet the widest range of applications. It can be used internally and externally. The multifunctional overpressure exhaust system HP 5000 made of stainless steel is the perfect solution when it comes to over- and/or under pressures of up to 5000 Pascal and high or low exhaust gas temperatures. SCHIEDEL CHIMNEY SYSTEMS LTD
Schiedel Fitting a stove & re-lining a chimney flue using steel flexible liner
This video shows the installation of a stove, as well as the initial preparation, testing and also re-lining of an existing chimney using Schiedel's TecnoFlex Flexible Liner. There are two methods of termination shown: Traditional clamp and plate, as well as using a screw fit pot hanger. SCHIEDEL CHIMNEY SYSTEMS LTD
Schiedel safely installing a stove with a steel chimney
This brief video shows our ICID Chimney System being installed with a stove in an house without an existing chimney breast. The process is simple, with safe distances from combustibles at each stage and shows that new build houses can easily retrofit a stove. SCHIEDEL CHIMNEY SYSTEMS LTD
The Opus ScandFire - All-in-one Pumice Schiedel Chimney System
Schiedel Chimney Systems, in collaboration with Firepower Heating Ltd., have designed a new minimalist inset system featuring the Opus Tempo 70i stove within a highly insulating pumice-based frame and chimney, which means you can build this directly next to an internal wall with no additional insulation required.
Schiedel Stove Installation with an External Steel Chimney
For homes without an internal chimney, one of the solutions is to retrofit an external chimney. This brief video shows how straightforward it is using an ICS Schiedel Chimney System. Chimneys can also be installed internally, going through ceilings and roof, with safe distances. SCHIEDEL CHIMNEY SYSTEMS LTD