SCHLÜTER SYSTEMS LTD

UNITS 3-5
BARDON 22
BEVERIDGE LANE
COALVILLE
LEICESTERSHIRE LE67 1TE

Tel: 01530 813396
Fax: 01530 813376

Company Logo

Suppliers of: movement expansion joints, floor edging, floor trims, edging profiles, expansion joints, balcony drainage, floor profiles, floor trims movement

The Schlüter team works closely with distributors, stockists and tiling contractors - providing the best customer service available - actively helping to ensure a long-lasting, attractive installation. Schlüter’s renowned technical expertise includes advising architects, specifiers and contractors, before they carry out the installation, preventing tomorrow’s problems.

Schlüter products are working today at many thousands of installations throughout the country - providing protection, and guaranteeing that the tile assembly continues to look as good as the day it was first fitted. Using Schlüter means the installation lasts as long as it’s designed to.

New for 2019:

Specification website:

Schlüter has developed a website dedicated to architects and specifiers, covering its products, case studies, events and more. Visit www.schluterspecifier.co.uk

CPDs and Lunch & Learns:

Four RIBA Approved CPDs are available from Schlüter-Systems Ltd, as part of a suite providing essential knowledge on preparation, protection and finishing for tile and stone installations.Lunch & Learn sessions, giving a focused insight into particular product ranges, are now also an integral part of the Schlüter’s CPD offering. To view all available CPD opportunities from Schlüter-Systems Ltd, visit www.schluterspecifier.co.uk/cpds.aspx

Useful Resources:

Technology And Design With Profiles

Schlüter profiles offer an ideal combination of functionality and design. Our product portfolio includes profiles for finishing wall and floor coverings, stair nosings, and profiles for expansion, perimeter, edge, and transition joints.

Waterproofing and Uncoupling

Schlüter-Systems offers practical and proven system solutions for waterproofing, uncoupling, drainage, and sound insulation of tiled coverings. Whether indoors or outdoors, new construction or renovation, you are sure to find the right solution here.

Balconies and Terraces

The Schlüter balcony system is a comprehensive product assortment of matching finishing profiles and gutters as well as drainage, uncoupling, and waterproofing systems.

Covering Assemblies

Schlüter®-BEKOTEC is a floor assembly system that can be constructed very quickly. It is thin, will not buckle, and does not develop tensions. Using the heating components of Schlüter®-BEKOTEC-THERM, this system can be used to install an effective heating system as a ceramic thermal comfort floor.

Underfloor Heating System

Schlüter®-BEKOTEC-THERM is the safe screed system with a low construction height. Together with the corresponding heating and controlling components the screed system becomes an energy-saving, reliable and quick-reacting floor-heating system.

Underlayment

Schlüter®-KERDI-BOARD, which is manufactured using new technology with a special focus on the practical requirements of construction sites. It offers many new options for installation and design.

Further technical information is available to download form the BPi PDF Library.

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. Please check with the supplier before specifying or purchasing products.

1 - Schluter Systems Price List 2019
movement expansion joints, floor edging, floor trims, edging profiles, expansion joints, balcony drainage, floor profiles, floor trims movement

Published [07/01/19]File size [22048 KB]

1. Schlüter Product Overview
Edge Profiles for Floor coverings, Wall corners and edge profiles, Stair nosing profile

Published [22/03/19]File size [547 KB]

1. Schlüter Specification Areas of Applications

Published [22/03/19]File size [6695 KB]

1. Schlüter Specification Hotel Leisure References

Published [22/03/19]File size [1100 KB]

1. Schlüter Specification Our Services

Published [22/03/19]File size [3105 KB]

Creating Living Spaces with Tiles from Schluter-Systems
Waterproofing, uncoupling, drainage, and sound insulation, Tile underlayment, structural panel, bonded waterproofing

Published [13/04/18]File size [1520 KB]

Schluter 6.4 Ditra Heat Uncoupling, waterproofing, floor and wall heating
Uncoupling, waterproofing, floor and wall heating

Published [12/05/17]File size [3451 KB]

Schluter Balkon Balcony Systems
COMPLETE SOLUTIONS FOR NEW CONSTRUCTION AND RENOVATION OF BALCONIES AND TERRACES

Published [13/08/15]File size [2135 KB]

Schluter FINEC Finished Edges
fine art of creating finished edges – Schlüter®-FINEC

Published [22/03/19]File size [699 KB]

Schluter Finishing Profiles
EDGE PROTECTION AND DESIGN OPTIONS FOR TILED WALLS

Published [13/08/15]File size [1646 KB]

Schluter Kerdi Waterproofing Membrane
SECURE WATERPROOFING FOR BATHROOMS

Published [13/08/15]File size [158 KB]

Schluter Kerdi-Board
SUBSTRATE, STRUCTURAL PANEL, BONDED WATERPROOFING

Published [05/05/16]File size [1107 KB]

Schluter Solutions for tile and stone Consumer Brochure
HEATING under tile and stone, Wetrooms and Wetroom Accessories, Wetroom Flooring, Tile backing board, Tile Edge Profiles

Published [13/04/18]File size [8100 KB]

Schlüter Trep Stair Nosings
Stair Nosings Anti Slip, Slip Resistant

Published [05/05/16]File size [321 KB]

Schluter-BEKOTEC-SLS
Flowable Self-Levelling Floor Screed for creating floating screeds for Bekotec Floor Assemblies

Published [18/06/18]File size [179 KB]

Schluter-DILEX Movement Joints
Profiles for maintenance free Movement Joints

Published [04/05/17]File size [4242 KB]

Schluter-DITRA 25 neutralises stresses
Uncoupling and waterproofing

Published [13/08/15]File size [1278 KB]

Schluter-KERDI Line Linear drainage channel
KERDI-LINE linear drain

Published [05/05/16]File size [406 KB]

Schluter-TROBA-PLUS Drainage Mat
Drainage Mat passive capillary drainage

Published [04/04/17]File size [568 KB]

Schluter-TROBA-STELZ-MR Mortar ring supports
Mortar ring supports for large format pavers

Published [04/04/17]File size [411 KB]

Schlüter® DESIGNLINE Border profiles
Walls with decorative profiles

Published [04/05/17]File size [385 KB]

Schlüter® DITRA 25 Underlayment
Uncoupling, waterproofing and vapour pressure equalisation, Uncoupling/Waterproofing Membrane

Published [04/05/17]File size [175 KB]

These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. Please check with the supplier before specifying or purchasing products.

Schlüter®-BEKOTEC-EN/P
Schlüter ® -BEKOTEC is a modular screed system for crack free and functionally safe floating screeds and heated screeds with coverings made of ceramic tiles, natural stone or other materials. The system is based on the studded polystyrene screed panel, Schlüter ® -BEKOTEC-EN, which is directly installed on top of load bearing substrates or conventional heat insulation and/or sound insulation panels. The geometry of the Schlüter ® -BEKOTEC-EN studded panel results in a minimum screed thickness of 32 mm between the studs and 8 mm above the studs. The studs form a grid pattern with a distance of 75 mm between them to accept the 16 mm diameter heating pipes if a heated screed is to be installed. The floor heating system is easily adjustable and ideally suited for use with low temperatures, since the screed volume to be heated or cooled is relatively small (approx. 57 kg/m 2 or 28.5 l/m 2 with 8 mm coverage). The curing stresses that occur in the screed due to shrinkage are absorbed by the studded pattern, thus controlling deformations such as curling over the entire area. It is therefore unnecessary to install movement joints or control joints in the screed. As soon as the cement screed is ready to support weight, the uncoupling mat Schlüter ® -DITRA 25 can be installed (calcium sulphate screed ≤ 2 CM-%). Ceramic tiles or natural stone tiles are then installed directly over this layer, using the thin-bed method. Movement joints in the covering layer are created using Schlüter ® -DILEX according to industry guidelines. Cover materials that are not susceptible to cracking, such as parquet or carpeting, can be directly installed over the screed as soon as it reaches the necessary residual moisture level for the corresponding covering. Expanded polystyrene (EPS) boards, Expanded polystyrene (EPS) board

Published [13/12/18]

Schlüter®-BEKOTEC-EN/PF
Schlüter ® -BEKOTEC is a modular screed system for crack free and functionally safe floating screeds and heated screeds with coverings made of ceramic tiles, natural stone or other materials. The system is based on the studded polystyrene screed panel, Schlüter ® -BEKOTEC-EN, which is directly installed on top of load bearing substrates or conventional heat insulation and/or sound insulation panels. The geometry of the Schlüter ® -BEKOTEC-EN studded panel results in a minimum screed thickness of 32 mm between the studs and 8 mm above the studs. The studs form a grid pattern with a distance of 75 mm between them to accept the 16 mm diameter heating pipes if a heated screed is to be installed. The floor heating system is easily adjustable and ideally suited for use with low temperatures, since the screed volume to be heated or cooled is relatively small (approx. 57 kg/m 2 or 28.5 l/m 2 with 8 mm coverage). The curing stresses that occur in the screed due to shrinkage are absorbed by the studded pattern, thus controlling deformations such as curling over the entire area. It is therefore unnecessary to install movement joints or control joints in the screed. As soon as the cement screed is ready to support weight, the uncoupling mat Schlüter ® -DITRA 25 can be installed (calcium sulphate screed ≤ 2 CM-%). Ceramic tiles or natural stone tiles are then installed directly over this layer, using the thin-bed method. Movement joints in the covering layer are created using Schlüter ® -DILEX according to industry guidelines. Cover materials that are not susceptible to cracking, such as parquet or carpeting, can be directly installed over the screed as soon as it reaches the necessary residual moisture level for the corresponding covering. Expanded polystyrene (EPS) boards, Expanded polystyrene (EPS) board

Published [13/12/18]

Schlüter®-DILEX-AKSN
Schlüter®-DILEX-KS offers secure edge protection for surfaces exposed to continuous vehicular traffic and is, therefore, suited for use in warehouses, production facilities, shopping centres and car parks, or for floor surfaces maintained with cleaning machines. The trapezoid perforated lateral attachment profiles of stainless steel or aluminium are connected with an 11 mm or 6 mm soft movement zone of thermoplastic elastomer. The profile’s rubber insert is replaceable in case of damage. The side sections of the profile provide effective edge protection for the surface covering. Strip movement joints, Strip movement joints

Published [13/12/18]

Schlüter®-DITRA 25
Designed for tile and natural stone installations, Schlüter®-DITRA 25 serves as a waterproofing membrane, a vapour pressure equalisation layer to accommodate moisture occurring at the underside of the substrate and an uncoupling layer for problematic substrates. The substrate must be even and load bearing. To bond Schlüter®-DITRA 25, use a bonding adhesive that is appropriate for the substrate. Apply the adhesive usinga 3 x 3 mm or 4 x 4 mm notched trowel. The anchoring fleece on the underside of Schlüter®-DITRA 25 must be fully engaged in the adhesive to provide a mechanical bond to the substrate. Please observe the open time of the bonding adhesive. Using the thin-bed method and following all applicable industry standards, set the tile or stone covering directly on the Schlüter®- DITRA 25 in such a way that the tile adhesive becomes mechanically anchored in the square, cut back cavities of the Schlüter®- DITRA 25 matting. Plastics sheets, Plastics sheets

Published [13/12/18]

Schlüter®-DITRA-HEAT
Schlüter®-DITRA-HEAT is a polypropylene membrane with a cut-back stud structure and an anchoring fleece laminated on the underside. It is a universal substrate for tile coverings, which serves as an uncoupling layer and vapour pressure equalisation layer and is designed for the attachment of heating cables. The substrate for the installation of Schlüter®-DITRA-HEAT must be clean, even, stable and rigid. Schlüter®-DITRA-HEAT is installed in thin bed adhesive that is suitable for the substrate. The adhesive is applied with a notched trowel (recommended size: 6 x 6 mm). The anchoring fleece on the underside of Schlüter®-DITRA-HEAT is fully embedded in the adhesive to ensure a mechanical bond of the fabric in the adhesive. The curing time of the adhesive must be observed. The heating cables can be installed immediately after adhering Schlüter®-DITRA-HEAT with spacing of at least 9 cm (every third stud) between the cables. The tiles are installed directly over Schlüter®-DITRA-HEAT in accordance with the applicable regulations, using the thin bed method. The thin bed adhesive bonds with the cut-back stud structure of the Schlüter®-DITRA-HEAT membrane. Roll size - 12.5 x 1 = 12.5m²   Vapour permeable sheets, Polypropylene membranes

Published [13/12/18]

Schlüter®-DITRA-HEAT-MA
Schlüter®-DITRA-HEAT is a polypropylene membrane with a cut-back stud structure and an anchoring fleece laminated on the underside. It is a universal substrate for tile coverings, which serves as an uncoupling layer and vapour pressure equalisation layer and is designed for the attachment of heating cables. The substrate for the installation of Schlüter®-DITRA-HEAT must be clean, even, stable and rigid. Schlüter®-DITRA-HEAT is installed in thin bed adhesive that is suitable for the substrate. The adhesive is applied with a notched trowel (recommended size: 6 x 6 mm). The anchoring fleece on the underside of Schlüter®-DITRA-HEAT is fully embedded in the adhesive to ensure a mechanical bond of the fabric in the adhesive. The curing time of the adhesive must be observed. The heating cables can be installed immediately after adhering Schlüter®-DITRA-HEAT with spacing of at least 9cm (every third stud) between the cables. The tiles are installed directly over Schlüter®-DITRA-HEAT in accordance with the applicable regulations, using the thin bed method. The thin bed adhesive bonds with the cut-back stud structure of the Schlüter®-DITRA-HEAT membrane. Sheet size - 0.8 x 1 = 0.8m²   Vapour permeable sheets, Polypropylene membranes

Published [13/12/18]

Schlüter®-KERDI 200
Schlüter®-KERDI has been developed for bonded waterproofing assemblies with coverings of tiles and natural stone. The waterproofing membrane should be bonded to an even, load bearing substrate with an appropriate tile adhesive. The tiles are laid directly on Schlüter®-KERDI using the thinbed method. Other trowel applied covering materials or plaster may also be used. Schlüter®-KERDI-DS is a waterproofing membrane and vapour barrier bonded to a tile covering, e.g. for use in swimming pools and spa areas, as well as for commercial applications with high humidity levels. Vapour barriers are suggested for moisture sensitive substrates such as wood, plasterboard and gypsum plaster. Accessories for Schlüter®-KERDI include internal and external corners, as well as pipe collars. To seal butt joints or corner joints, Schlüter®-KERDI-KEBA, in widths of 8.5, 12.5, 15, 18.5 and 25 cm is available. Schlüter®-KERDI-FLEX, in widths of 12.5 cm or 25 cm, is used to seal over expansion joints or flexible edge joints. Plastics sheets, Plastics sheets

Published [13/12/18]

Schlüter®-KERDI-BOARD
It consists of an extruded hard foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in the tile adhesive. With the available panel thicknesses of 5, 9, 12.5, 19, 28, 38 and 50 mm, Schlüter®-KERDI-BOARD covers a broad range of application areas for creating level, waterproof substrates for the installation of ceramic and natural stone tiles. With suitable preparation of the joint areas, the structural panel may be used for officially approved bonded waterproofing assemblies. Schlüter®-KERDI-BOARD is suitable for: creating tile substrates on green masonry, existing substrates of all kinds and stud frames made of wood or metal; creating straight or curved separating walls; concealing wall mounted installations and piping (pipe boxes); creating straight or curved bathtub and shower surrounds; as well as creating work surfaces, vanities, storage shelves or any other bathroom structures. The material is equally suitable for creating level substrates in floor renovation projects e.g. residential bathroom installations designed for foot traffic. Schlüter®-KERDI-BOARD is simply cut to size with a utility knife. The gridlines printed on the surface are helpful for neat and quick installation. Extruded polystyrene (XPS) boards, Extruded polystyrene (XPS) board

Published [13/12/18]

Schlüter®-KERDI-DRAIN - Floor Drain
Schlüter ® -KERDI-DRAIN is a floor drain system for the easy and reliable connection of drainage systems to bonded waterproofing assemblies. As specified in the information sheet of the German Construction Association (ZDB), these are a generally recognised technical principle. The Schlüter ® -KERDI collar is attached to the large, trapezoid perforated and fleece coated adhesive flange of the bonding flange insert as a sealing connection to the bonded waterproofing assembly. Schlüter ® -KERDI-DRAIN products have a modular structure and can be individually assembled to match every requirement. A variety of grate designs can be combined with different vertical or horizontal drain bodies with or without odour traps. Shower tray wastes, Wastes for shower trays

Published [13/12/18]

Schlüter®-KERDI-LINE-H 40
Schlüter ® -KERDI-LINE-H is a component linear drainage system for the construction of floor level showers with ceramic tiles, natural stone, or other coatings. It consists of a formed stainless steel channel body with a grate and frame structure that can be seamlessly adjusted to the thickness of the covering from 3 to 25 mm with the help of the installation aid included in the set. Schlüter ® -KERDI-LINE-H with horizontal drain features an integrated odour trap and a drain body. Schlüter ® -KERDI-LINE-H is available in lengths from 50 to 180 cm in 10 cm increments. A collar made of Schlüter ® -KERDI is adhere to the adhesive flange on all sides of the channel body. It ensures the reliable connection of the channel body to the bonded waterproofing assembly, both in the floor area and on upright walls. The visible surface of the frame and the grate, which is available in a closed or punched design or with square perforations, consists of brushed stainless steel. The design grate is also available as a 10 mm deep tile pan for tile inserts. A frameless covering support (Schlüter®-KERDI-LINE-D) that is universally suitable for all heights is also available. Height of channel support for KERDI-LINE-H: DN 40 (40 mm) = 78 mm. . Shower tray wastes, Wastes for shower trays

Published [13/12/18]

Schlüter®-KERDI-LINE-H 50
Schlüter ® -KERDI-LINE-H is a component linear drainage system for the construction of floor level showers with ceramic tiles, natural stone, or other coatings. It consists of a formed stainless steel channel body with a grate and frame structure that can be seamlessly adjusted to the thickness of the covering from 3 to 25 mm with the help of the installation aid included in the set. Schlüter ® -KERDI-LINE-H with horizontal drain features an integrated odour trap and a drain body. Schlüter ® -KERDI-LINE-H is available in lengths from 50 to 180 cm in 10 cm increments. A collar made of Schlüter ® -KERDI is adhere to the adhesive flange on all sides of the channel body. It ensures the reliable connection of the channel body to the bonded waterproofing assembly, both in the floor area and on upright walls. The visible surface of the frame and the grate, which is available in a closed or punched design or with square perforations, consists of brushed stainless steel. The design grate is also available as a 10mm deep tile pan for tile inserts. A frameless covering support (Schlüter®-KERDI-LINE-D) that is universally suitable for all heights is also available. Height of channel support for KERDI-LINE-H: DN 50 (50 mm) = 97 mm. Shower tray wastes, Wastes for shower trays

Published [13/12/18]

Schlüter®-KERDI-LINE-H 50 G2
Schlüter®-KERDI-LINE-H 50 G2 with front-facing horizontal drainage is equipped with an odour trap that is integrated into the drain body. In accordance with DIN 1253, it has a drain capacity of ≥ 0.8 l/s and a water trap height of 50 mm. Height of channel support: DN 50 (50 mm) = 120 mm. Floor gullies, Floor gullies

Published [13/12/18]

Schlüter®-KERDI-LINE-V 50 G2
Schlüter®-KERDI-LINE-V 50 G2 with vertical drainage is equipped with an odour trap that is integrated into the drain body. In accordance with DIN 1253, it has a drain capacity of ≥ 0.8 l/s and a water trap height of 50 mm. Height of channel support: DN 50 (50 mm) = 48 mm. Floor gullies, Floor gullies

Published [13/12/18]

Schlüter®-KERDI-SHOWER-L
The set is specifically designed to match the linear drainage system Schlüter®-KERDI-LINE (see product data sheet 8.7). The sloped tray with a gradient of 2% features a surface of Schlüter®-KERDI waterproofing membrane and is packaged in a folded format for easy transportation. For intermediate installation an adapted sloped tray is installed on both sides of the linear drain, while the wall version uses a design in which the sloped tray abuts the linear drain on one side. The thickness of the levelling board, combined with the sloped tray, matches the height of the channel support (for the horizontal drain). The levelling board features a tongue and groove design and also comes in two parts. After height adjustment of the levelling board (with horizontal drain), the sloped tray is adhered over the levelling board with tile adhesive and placed next to the channel support to fit flush with the surface. The installation of Schlüter®-KERDI-LINE-V for vertical drainage allows for assembly heights as low as 24 mm. The levelling board is not used in these cases. Shower trays, Shower trays

Published [13/12/18]

Schlüter®-KERDI-SHOWER-LC
The set is specifically designed to match the linear drainage system Schlüter®-KERDI-LINE (see product data sheet 8.7). The sloped tray with a gradient of 2% features a surface of Schlüter®-KERDI waterproofing membrane and is packaged in a folded format for easy transportation. For intermediate installation an adapted sloped tray is installed on both sides of the linear drain, while the wall version uses a design in which the sloped tray abuts the linear drain on one side. The thickness of the levelling board, combined with the sloped tray, matches the height of the channel support (for the horizontal drain). The levelling board features a tongue and groove design and also comes in two parts. After height adjustment of the levelling board (with horizontal drain), the sloped tray is adhered over the levelling board with tile adhesive and placednext to the channel support to fit flush with the surface. The installation of Schlüter®-KERDI-LINE-V for vertical drainage allows for assembly heights as low as 24 mm. The levelling board is not used in these cases. Shower trays, Shower trays

Published [13/12/18]

Schlüter®-KERDI-SHOWER-LCS
The set is specifically designed to match the linear drainage system Schlüter®-KERDI-LINE (see product data sheet 8.7). The sloped tray with a gradient of 2% features a surface of Schlüter®-KERDI waterproofing membrane and is packaged in a folded format for easy transportation. For intermediate installation an adapted sloped tray is installed on both sides of the linear drain, while the wall version uses a design in which the sloped tray abuts the linear drain on one side. The thickness of the levelling board, combined with the sloped tray, matches the height of the channel support (for the horizontal drain). The levelling board features a tongue and groove design and also comes in two parts. After height adjustment of the levelling board (with horizontal drain), the sloped tray is adhered over the levelling board with tile adhesive and placednext to the channel support to fit flush with the surface. The installation of Schlüter®-KERDI-LINE-V for vertical drainage allows for assembly heights as low as 24 mm. The levelling board is not used in these cases. Shower trays, Shower trays

Published [13/12/18]

Schlüter®-KERDI-SHOWER-LS
The set is specifically designed to match the linear drainage system Schlüter®-KERDI-LINE (see product data sheet 8.7). The sloped tray with a gradient of 2% features a surface of Schlüter®-KERDI waterproofing membrane and is packaged in a folded format for easy transportation. For intermediate installation an adapted sloped tray is installed on both sides of the linear drain, while the wall version uses a design in which the sloped tray abuts the linear drain on one side. The thickness of the levelling board, combined with the sloped tray, matches the height of the channel support (for the horizontal drain). The levelling board features a tongue and groove design and also comes in two parts. After height adjustment of the levelling board (with horizontal drain), the sloped tray is adhered over the levelling board with tile adhesive and placednext to the channel support to fit flush with the surface. The installation of Schlüter®-KERDI-LINE-V for vertical drainage allows for assembly heights as low as 24 mm. The levelling board is not used in these cases. Shower trays, Shower trays

Published [13/12/18]

Schlüter®-KERDI-SHOWER-T
Schlüter®-KERDI-DRAIN-BASE is available as a set. Depending on the conditions of the construction site, other variants of Schlüter®-KERDI-DRAIN may be used as well. Various sets of Schlüter®-KERDI are available for waterproofing the wall areas. The surface of the sloped trays already has the necessary gradient of > 2 % (except for long sides of sloped trays with the dimension 180 x 90 cm). The drain body and the drainage pipe are inserted into the levelling board, which represents the lowest possible construction height and can be adjusted, for example with a mortar layer. The available base dimensions are:90 x 90 cm100 x 100 cm120 x 120 cm150 x 150 cm90 x 180 cm Smaller dimensions can easily be cut to size with a utility knife. The material features prepared cutting grooves for circular cuts. The matching floor drain for the system, Schlüter®-KERDI-DRAIN-BASE (for horizontal drainage), has a drain capacity of 0.4 l/s. Matching variants of Schlüter®-KERDIDRAIN are available for special cases with higher drain capacity needs, vertical drains, or other requirements. Shower trays, Shower trays

Published [13/12/18]

Schlüter®-KERDI-SHOWER-TB
Schlüter ® -KERDI-SHOWER-TB is a sloped tray with a 2% slope and a pre-adhered coating of Schlüter ® -KERDI for the direct installation of tiles in floor level showers and for the connection of the folded parts of the sloped tray. It is designed to accommodate the floor drain Schlüter ® -KERDI-DRAIN. With just 22 mm, the low assembly height of Schlüter ® -KERDI-SHOWER-TB is ideally suited for wooden structures. Schlüter ® -KERDI-SHOWER stands out for its particularly easy and reliable installation.   Together with Schlüter ® -KERDI waterproofing component, this meets the requirements of the German Certificate of National Technical Approval (abP) for Category A waterproofing assemblies. The system  components of Schlüter ® -KERDI-SHOWER are packaged as a set and can easily be combined as required. Available base dimensions are: 1000 x 1000 mm. Shower trays, Shower trays

Published [13/12/18]

Schlüter®-KERDI-SHOWER-TC
Schlüter®-KERDI-DRAIN-BASE is available as a set. Depending on the conditions of the construction site, other variants of Schlüter®-KERDI-DRAIN may be used as well. Various sets of Schlüter®-KERDI are available for waterproofing the wall areas. The surface of the sloped trays already has the necessary gradient of > 2 % (except for long sides of sloped trays with the dimension 180 x 90 cm). The drain body and the drainage pipe are inserted into the levelling board, which represents the lowest possible construction height and can be adjusted, for example with a mortar layer. The available base dimensions are:90 x 90 cm100 x 100 cm120 x 120 cm150 x 150 cm90 x 180 cm Smaller dimensions can easily be cut to size with a utility knife. The material features prepared cutting grooves for circular cuts. The matching floor drain for the system, Schlüter®-KERDI-DRAIN-BASE (for horizontal drainage), has a drain capacity of 0.4 l/s. Matching variants of Schlüter®-KERDIDRAIN are available for special cases with higher drain capacity needs, vertical drains, or other requirements. Shower trays, Shower trays

Published [13/12/18]

Schlüter®-QUADEC-AC
Schlüter®-QUADEC is a connection profile that offers edge protection for external corners of tiled walls. The profiles, which are available in a wide range of materials, colours and finishes, allow for a precise colour match of the exposed tile edges with the tiles and grout. As an alternative, they can also be used to create interesting decorative contrasts. Preformed tiling strip joints, Preformed strip joints to tiling

Published [13/12/18]

Schlüter®-SCHIENE-A
Schlüter®-SCHIENE is an extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. Applications include: transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs; as well as a finishing profile for all types of surfaces, such as carpet, parquetry, laminates, natural stone coverings, or cold cured resin coverings. Floor edge trims, Floor edge trims

Published [13/12/18]

ACCESS PANELS Invisible Closure Systems .
ACOUSTIC FLOORING Matting .
ADHESIVES . .
ADHESIVES FOR DIFFERENT PRODUCTS Ceramic Tile Epoxy Resin Two Part
ADHESIVES FOR DIFFERENT PRODUCTS Ceramic Tile Flexible
ANGLES Aluminium .
BALCONY Drainage Systems .
BALCONY Edging Systems .
BALCONY Finishing Profiles Edge Profiles Perimeter Profiles Finishing Trims
BALCONY Floor Drains .
BALCONY Formwork Rings Mould Rings
BATHROOM Tanking .
BATHROOM Tanking Membranes
BENDING MACHINES
CERAMIC TILE Joining Profiles .
CERAMIC TILE Underlay Systems .
CORNER GUARDS See Also WALL GUARDS: Corner Protection .
CORNER PROTECTION See Also WALL GUARDS: Corner Protection .
COVER STRIPS Expansion Movement Joint Cover Profiles
DRAINAGE Balcony Systems .
DRAINAGE GRATINGS Stainless Steel .
DRAINAGE MEMBRANES Passive Capillary Drainage .
DRAINAGE MEMBRANES Sub-Surface Drainage .
DRAINAGE MEMBRANES Uncoupling Passive Capillary Mats .
EDGE PROTECTION Internal .
EXPANSION MOVEMENT JOINTS Covers .
EXPANSION MOVEMENT JOINTS Foam .
EXPANSION MOVEMENT JOINTS Sections Profiles .
EXPANSION MOVEMENT JOINTS Sections Profiles Aluminium
EXPANSION MOVEMENT JOINTS Sections Profiles Aluminium PVC
EXPANSION MOVEMENT JOINTS Sections Profiles Aluminium Synthetic Rubber
EXPANSION MOVEMENT JOINTS Sections Profiles Brass
EXPANSION MOVEMENT JOINTS Sections Profiles Brass PVC
EXPANSION MOVEMENT JOINTS Sections Profiles for Flooring
EXPANSION MOVEMENT JOINTS Sections Profiles for Heavy Duty Loading Applications
EXPANSION MOVEMENT JOINTS Sections Profiles for Hygienic Applications
EXPANSION MOVEMENT JOINTS Sections Profiles for Membrane Jointing
EXPANSION MOVEMENT JOINTS Sections Profiles for Tiles
EXPANSION MOVEMENT JOINTS Sections Profiles Metal
EXPANSION MOVEMENT JOINTS Sections Profiles PVC
EXPANSION MOVEMENT JOINTS Sections Profiles PVC-u Rigid PVC
EXPANSION MOVEMENT JOINTS Sections Profiles Stainless Steel
EXPANSION MOVEMENT JOINTS Sections Profiles Stainless Steel Synthetic Rubber
EXPANSION MOVEMENT JOINTS Sections Profiles Watertight Waterproof
EXPANSION MOVEMENT JOINTS Strips: .
EXPANSION MOVEMENT JOINTS Strips: Aluminium
EXPANSION MOVEMENT JOINTS Strips: PVC
EXPANSION PLATES Aluminium .
EXPANSION PLATES Brass .
EXPANSION PLATES Stainless Steel .
FLAT ROOF Paving and Tile Supports .
FLOOR Acoustic Mats .
FLOOR Drip Edge Profiles .
FLOOR Profiles .
FLOOR CHANNELS Shower Room .
FLOOR CHANNELS Wetroom Drainage Linear Channels
FLOOR CHANNELS Wetroom Drainage Linear Channels Stainless Steel
FLOOR DRAIN Frames Retrofit Retro-Fit Retro Fit
FLOOR DRAIN GRATINGS Plastic .
FLOOR DRAIN GRATINGS Stainless Steel .
FLOOR DRAINS .
FLOOR DRAINS Bathroom/Wetroom See Also SHOWER DRAINS
FLOOR DRAINS Bonded Waterproofing Membranes .
FLOOR DRAINS Linear Channel .
FLOOR DRAINS Odour Trap .
FLOOR DRAINS Odour Trap Waterless
FLOOR DRAINS Terrace .
FLOOR EDGE TRIMS See Also FLOOR TRIMS .
FLOOR GULLIES Shower .
FLOOR GULLIES Stainless Steel .
FLOOR GULLIES Wetroom .
FLOOR JOINTS Expansion Movement Joint Covers .
FLOOR JOINTS Expansion Movement Joint Covers Flush Fitting
FLOOR JOINTS Expansion Movement Joint Covers Heavy Duty
FLOOR JOINTS Expansion Movement Joint Covers Surface Fitting
FLOOR JOINTS Expansion Movement Joint Systems .
FLOOR JOINTS Expansion Movement Joint Systems Perimeter
FLOOR PLATES Floor Trims .
FLOOR SCREED Drainage Mats .
FLOOR SCREED Movement Joints .
FLOOR SCREED Passive Capillary Drainage Systems .
FLOOR SCREED Studded Panels .
FLOOR SCREEDS Floating .
FLOOR SCREEDS Flow Applied .
FLOOR SCREEDS Modular Systems .
FLOOR SCREEDS Self-Levelling Self-Smoothing .
FLOOR TRIMS Aluminium .
FLOOR TRIMS Aluminium Anodised Titanium .
FLOOR TRIMS Antique Finish .
FLOOR TRIMS Brass .
FLOOR TRIMS Bronze .
FLOOR TRIMS Ceramic Tiles .
FLOOR TRIMS Chrome Finish .
FLOOR TRIMS Curved .
FLOOR TRIMS Edge Strips .
FLOOR TRIMS Formable Bendable Curvable .
FLOOR TRIMS Formable Bendable Curvable Flexible Floor Finishes
FLOOR TRIMS Formable Bendable Curvable Flexible Metal
FLOOR TRIMS Gold Finish .
FLOOR TRIMS Gradient Profile .
FLOOR TRIMS Marble Floors .
FLOOR TRIMS Metal .
FLOOR TRIMS Purpose Made Custom Made Bespoke Fabrications
FLOOR TRIMS PVC .
FLOOR TRIMS PVC-u .
FLOOR TRIMS Rounded Profile .
FLOOR TRIMS Separation Joint .
FLOOR TRIMS Silver Finish .
FLOOR TRIMS Special Finishes .
FLOOR TRIMS Stainless Steel .
FLOOR TRIMS Stone Floors .
FLOOR TRIMS Terrazzo Floors .
FLOOR TRIMS Threshold Trims Diminishing Profiles
FLOOR TRIMS Transition Strips .
FLOOR TRIMS Transition Strips Joining .
FLOOR TRIMS Twin .
FLOOR TRIMS Wall Edging Border .
FLOORING Accessories .
FLOORING Transition Strips .
FLOORING UNDERLAYS For Ceramic Tiles .
FORMWORK Moulds Rings
GRATINGS Shower Drain .
GRATINGS Stainless Steel .
HEATING ELECTRIC Wireless Controlled WiFi Enabled
INTUMESCENT GAP SEALS Structural Movement Joints .
INTUMESCENT MOVEMENT JOINTS Gap Seal .
JOINT Profiles For Floors Ceramic Tile
JOINT Profiles For Floors Edges
JOINT Profiles For Floors Fluorescent
MATS Passive Capillary Drainage Floor
MATS Screed Insulating Insulating Screed Mats
MATTING Acoustic .
MEMBRANES Ceramic Tile Applications .
MEMBRANES Drainage See Also DRAINAGE MEMBRANES:
MEMBRANES Polyethylene .
MEMBRANES Studded Polyethylene .
MEMBRANES Tanking .See Also MEMBRANES: Waterproofing
MEMBRANES Uncoupling .
MEMBRANES Vapour Barrier .
MEMBRANES Vapour Proof .
MEMBRANES VCL Vapour Control Layer .
PANELS Tile Underlay .
PAVING SLABS Laying Rings .
PAVING SLABS Support Systems .
PREFABRICATED CORNERS
PROFILES Feature Channel .
RAINWATER PIPES Balcony Systems .
ROOF TERRACE Drainage .
ROOFTOP SUPPORT SYSTEMS ROOF MOUNTED Paving and Tile Supports .
SCREED Joints .
SCREED Mats .
SCREED Passive Capillary Drainage Systems .
SCREED Studded Panels .
SCREED Ventilation .
SEALING Bands .
SHOWER Tanking Systems .
SHOWER DRAIN Gratings .
SHOWER DRAIN Gratings Decorative Designs
SHOWER DRAINS Bronze .
SHOWER DRAINS Fire Protection Collar Incorporated .
SHOWER DRAINS Floor Level Showers .
SHOWER DRAINS Stainless Steel .
SHOWER DRAINS Wetroom Applications .
SHOWER ENCLOSURES Tanking Systems .
SKIRTING TRIM Skirting Profiles .
SKIRTINGS Cable Channel Incorporated .
STAIR EDGE TRIMS For Ceramic Tiles .
STAIR EDGE TRIMS Stair Borders Stair Edgings Step Edges .
STAIR NOSINGS Aluminium .
STAIR NOSINGS Aluminium Replaceable Anti-Slip Insert .
STAIR NOSINGS Aluminium Slip Resistant Insert .
STAIR NOSINGS Anti-Slip Slip Resistant
STAIR NOSINGS Exterior .
STAIR NOSINGS Inserts Bronze Slip Resistant Inserts
STAIR NOSINGS Inserts Fluorescent
STAIR NOSINGS Inserts Safety Infills Photoluminescent
STAIR NOSINGS Inserts Safety Infills Visual Warning
STAIR NOSINGS Metal .
STAIR NOSINGS Retrofit Retro-fit .
STAIR NOSINGS Slip Resistant In-Situ .
STAIR NOSINGS Stainless Steel .
STAIR NOSINGS Stainless Steel Non-Slip Tread Combined
STAIR NOSINGS Stainless Steel Replaceable Anti-Slip Insert
STAIR NOSINGS Terrazzo .
STAIRTREADS Thermoplastic Replaceable Tread
TANKING Systems .
TERRACE Drainage Systems .
TERRACE Paving and Tile Supports .
TERRAZZO Dividing Profiles Divider Strips Brass
THRESHOLD Bars .
THRESHOLD Plates .
THRESHOLD Profiles .
THRESHOLD Trims .
TILE EDGE TRIMS Aluminium Profiles .
TILE EDGE TRIMS Anodised Aluminium Profiles .
TILE EDGE TRIMS Brass Profiles .
TILE EDGE TRIMS Chrome Finish Profiles .
TILE EDGE TRIMS Decorative Border Profiles .
TILE EDGE TRIMS Divider Strips Brass
TILE EDGE TRIMS Profiles for Ceramic Tiles .
TILE EDGE TRIMS Stainless Steel Profiles .
TILE JOINTING SYSTEMS Fluorescent .
TILE UNDERLAYS Wall and Floor .
TILES, FLOOR Ceramic: Transition Edging
TILES, WALL Ceramic Edging Systems
WALL Corner Profile System .
WALL GUARDS Corner Protection: .
WALL GUARDS Corner Protection: Aluminium .
WALL GUARDS Corner Protection: Brass .
WALL GUARDS Corner Protection: Stainless Steel .
WALL JOINTS Expansion Movement Joint Covers Cover Profiles
WALL JOINTS Movement Joint Perimeter Systems .
WATERPROOFING SYSTEMS Floor .
WATERPROOFING SYSTEMS Wall .
WETROOM Accessories .
WETROOM Drainage .
WETROOM Floor Drains .
BARA Balcony & Terrace Edging Profiles
BARA-ESOT Skirting Support System
BARA-RAKE Balcony & Terrace Edging Profiles
BARA-RAM Balcony & Terrace Edging Profiles
BARA-RAP Balcony & Terrace Edging Profiles
BARIN Balcony Gutter & Drainage System
BEKOTEC Floor Screed Underlayment
DECO Edge Protection/Decorative Joint
DESIGNBASE Skirtings
DESIGNLINE Decorative Listello Profile
DIADEC Wall Edge Protection Profiles
DILEX Movement & Control Joint Profiles
DITRA Uncoupling/Waterproofing Membrane
DITRA-DRAIN Passive Capillary Drainage System
DITRA-HEAT Underfloor Heating Systems
DITRA-HEAT In Wall Heating Systems
DITRA-HEAT DUO Sound Insulating Mat
DITRA-SOUND Sound Insulating Mat
ECK Wall Edge Protection Profiles
INDEC External Tile Edge Profiles
JOLLY External Tile Edge Profile
KERDI Waterproofing Mats
KERDI-BOARD Tile Backer Boards
KERDI-COLL Two Part Sealant
KERDI-DRAIN Floor Drains
KERDI-FIX Elastic Adhesive
KERDI-FLEX Waterproof Sealing Band
KERDI-KEBA Sealing Band
KERDI-KERECK Prefabricated Corners
KERDI-KERS Prefabricated Corners
KERDI-LINE Shower Drains
KERDI-LINE-STYLE Decorative Channel Gratings
KERDI-SHOWER Shower Waterproofing Systems
LIPROTEC Illuminated Profiles
MY SCHLUTER-KERDI-LINE Engraved Shower Drain Gratings
PROCUT Cutting Wheel
QUADEC Stainless Steel Edge Protector
REMA Invisible Access Panel Kit
RENO Transition Profiles
RENO-RAMP Gradient Profile for Floor Coverings
RONDEC External Tile Edge Profile
RONDEC-PRO Rounded Profile for Floor Coverings
RONDEC-STEP Decorative Edge Protection
RUMA Bending Machine
SCHIENE Edge Protection Profiles
SCHIENE-BASIC Finishing Profile for Floor Coverings
SCHLUTER CLEAN Polish
SCHLUTER-BEKOTEC Self-Levelling Screeds
SCHLUTER-FINEC External Tile Edge Profiles
SCHLUTER-PROFILES Stair Nosing Profiles
SCHLUTER-PROFILES Edge Profiles for Floor Coverings
SCHLUTER-RENO Transition Profiles
SCHLUTER-TREP Stair Nosing Profiles
TREP Stair Nosing Profiles
TROBA Sub-Surface Drainage Membrane
TROBA-LINE Balcony Drainage Channels
TROBA-PLUS Sub-Surface Drainage Membrane
TROBA-STELZ Paving Slab Supports
WINKEL Solid Angle Profile

Schlüter Set to Exhibit at Hard Surfaces 2019

February 2019

Schlüter Set to Exhibit at Hard Surfaces 2019

The market-leading tiling systems manufacturer is busy preparing for the inaugural Hard Surfaces Show, at which it plans to demonstrate its all-round prowess in not just product, but its unique understanding of applications and services.

The Coalville-based UK operation of the internationally renowned company is selective in the national exhibitions it attends, but has identified the Hard Surfaces Show in conjunction with the Natural Stone Show to be an excellent match for its solutions and sphere of work. A unique stand is being crafted to suit the 36m2 space and is due to be a key source of inspiration and discussion.

The focal point of the stand will be a functioning wetroom space, at once demonstrating Schlüter’s solutions for substrates, waterproofing, uncoupling, under-surface heating, drainage and profiles. Through strategically cut-away sections of tile, visitors will be privy to exactly where and why products are used.

“We can show samples of membranes and pieces of profile in isolation, but this approach ultimately doesn’t do the products justice”, says Carl Stokes, Head of Marketing at Schlüter-Systems Ltd, “Our solutions come alive when people see how they work together in the context of an overall design, and Hard Surfaces 2019 is the perfect stage for our ambitious and eye-catching centre-piece”.

The focus on how Schlüter can support successful tile and stone installations will be continued throughout the stand with sample pairings of tile and finishing profile in-line with the latest trends. The Schlüter team will also be presenting some of the latest additions to the company’s portfolio, including the Schlüter-TROBA-LEVEL pedestal system for loose-lay tile and pavers and the Schlüter-SHELF range of designer shelving solutions.

Schlüter-Systems boasts an experienced team of specification experts assigned to support different regions across the UK and Ireland and understand their unique characteristics. This has led to Schlüter products being included in all manner of projects across the hotel and leisure, residential, commercial, retail and transport sectors.
You will find Schlüter-Systems Ltd on Stand J16 of Hard Surfaces 2019. For more information about Schlüter-Systems Ltd’s attendance at the event, please call 01530 813396, email pr@schluter.co.uk or visit www.schluterspecifier.co.uk.

Smart Thermostat Enhances Award-Winning Underfloor Heating System

July 2018

Smart Thermostat Enhances Award-Winning Underfloor Heating System

Schlüter-Systems Ltd is delighted to announce the arrival of a brand new smart thermostat, a highly anticipated enhancement to its electric underfloor heating system, Schlüter®-DITRA-HEAT-E.
Based on Schlüter’s existing 2” thermostat, the new WiFi-enabled introduction allows for more closely customised operation of the award-winning system. The discreet thermostat offers minimal visual impact within a room and connects directly to a chosen wireless network. In addition, an easy set-up wizard and capacity to schedule up to six events per day results in ultimate flexibility for end users.
Alongside the new thermostat is a dedicated app; Schlüter-HEAT-CONTROL is free for both Android and Apple iOS devices and boasts an intuitive interface for easy control of the system. Via the app, users can control each thermostat individually or group multiple thermostats together to form heating zones of their choice. Multiple devices can use the app and multiple users can control the system, remotely adapting settings to their individual requirements.
Other features and benefits include:
- Remote setting of the system via the app (on/off) - ideal in order to be greeted by a warm floor on arrival
- Adaptive function – optimises when heating is turned on/off to ensure desired temperature is achieved in the most energy efficient manner
- Open Window function – shuts off the heating for 30 minutes if a rapid drop in temperature (usually the result of an open window or external door) is detected
- Six default modes – Manual, Eco, Comfort, Boost, Frost Protection and Holiday – which can be called upon as desired
- Track energy consumption and cost
In conjunction with the unique Schlüter®-DITRA-HEAT-DUO matting, with its fast reacting heating and acoustic reduction fleece, this new announcement installs Schlüter’s electric underfloor heating solution as an unrivalled system. The smart thermostat brings the controls for the system in-line with users’ expectations and allows it to function even more effectively in tandem with a busy life.
For more information, call 01530 813396, email pr@schluter.co.uk or visit www.ditraheat.co.uk.

List all press releases