Hep2O UNDERFLOOR HEATING & COOLING
Suppliers of: underfloor heating systems commercial underfloor heating controls commercial underfloor heating systems
Hep2O from Wavin is one of the UK leaders in warm water underfloor heating and a major supplier to both the residential and commercial sectors.
We have underfloor heating solutions for new-build or renovation projects, with any floor construction or type of heat source, backed up by our complete project design service.
Hep2O is a complete system that is product-based and provides the highest possible heating performance while being quick and easy to install.
Main Product Solutions:
If you want to heat a screeded floor – either new or existing, we have the right solution for you. Our systems include staples, system plates, polystyrene insulation panels with integrated pipe, and low build systems that minimise build height on existing floors.
For battened or joisted timber floors, our foiled polystyrene systems provide great heat diffusion and an integrated insulation layer. We also have modular wood systems that can accommodate irregular spaced joists and low build solutions where height is critical.
To ensure you get the maximum comfort and efficiency from your system we offer a range of easy to use but highly functional controls and thermostats. So you can choose the right solution, we offer wired, wireless and web enabled networked options.
Whether you are using radiators or surface heating and cooling, your system requires a reliable backbone. Wavin pipe systems give connection with confidence – whatever your heating and cooling choice.
Hep2O underfloor heating can provide a comprehensive design service, with all necessary materials, CAD installation drawings and instructions sent direct to site. Alternatively, we can supply underfloor heating components to installers who wish to undertake their own system designs. Wavin is a Full Member of The Underfloor Heating Manufacturer Association (UHMA).
View the Wavin Ranges on BPi:
- Wavin Group Entry
- Osma Above & Below Ground Drainage
- Hep2O Push-fit Plumbing
- Hepworth Clay & Terracotta Drainage
- Warmafloor Underfloor Heating
Further Technical information is available to download from the BPi Download Library
These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. Please check with the supplier before specifying or purchasing products.
1 - Hep2O Underfloor Heating PRODUCT GUIDE
Plumbing and heating Underfloor heating
Published [19/01/16]File size [2711 KB]
2 - Hep2O UFH Installer Guide
underfloor heating installer guide
Published [10/12/15]File size [5099 KB]
3. Hep2O Underfloor Heating Product Installation Manual
Published [23/11/18]File size [1719 KB]
4. Hep20 Osma Above Ground Trade Price List (OS101) February 1st 2017 Rev1
Soil, Waste and Rainwater drainage, Hep20 Underfloor Heating
Published [20/02/18]File size [8480 KB]
5 - Hep2O Installation Guide - Composite Manifold
Published [19/01/16]File size [2655 KB]
6 - Hep2O UFH 8 Zone Control Systems (UF463)
Under Floor Heating Wavin 8 Zone Control Centre
Published [19/01/16]File size [7855 KB]
7. Hep2O Abridged Price List (HEP103) February 1st 2017
plumbing and heating
Published [20/02/18]File size [2329 KB]
Hep2O Case Study Low Build Max
Published [27/03/17]File size [1583 KB]
Hep2o UFH 8 Zone Control Centre PIM UF463 4337
Underfloor Heating Controls Neo Range 230V 8 Zone
Published [18/01/19]File size [8089 KB]
Hep2O UFH Floating Floors Data Sheet
Dry Construction Floors Underfloor Heating
Published [19/01/16]File size [147 KB]
Hep2O Underfloor Heating 16 Zone Control Centre Product Installation Manual
Published [18/01/19]File size [5006 KB]
Hep2O Underfloor Heating Composite Manifold Product Installation Manual
Published [15/10/18]File size [2839 KB]
Hep2o Underfloor Heating Solution Finds a Home in Tower Hamlets
With sustainability and affordability a key consideration in the design of 105 new family homes in Tower Hamlets, a comprehensive Hep2O underfloor heating system from Wavin has been specified to provide cost-effective and energy efficient heat distribution throughout each home – helping the building to achieve the highest level Code for Sustainable Homes with a credit score of 6.
Designer Team Homes’ approach to the homes on Parmiter Street was to create 100% family housing using modern methods of construction on an inner city site. Along with a prefabricated concrete panel system, photovoltaics, and rooftop allotments, these innovative and low energy homes feature the Hep2O underfloor heating system which combines high comfort levels and low running costs with a fast, simple and non-intrusive installation.
“Due to the block and beam construction, the challenge for the customer was to provide a limited acoustic construction which gives a good heat output but was still affordable. They also had to achieve a good Sustainable Homes credit score,” commented Graham Hicks, Plumbing and Heating Manager, Wavin Group.
For the screeded floor construction, the specification of the Hep2O Pocketed Polystyrene panels meant that a less expensive acoustic layer could be used, because the finished system has a higher sprung mass. Although the screed costs more than the chipboard structure for the floating floor the overall cost was significantly less, plus the system’s performance was much better.
Plumbing contractor WJ Brown installed a 35mm thick Pocketed Polystyrene insulation layer alongside more than 520 linear metres of Wavin continuous pipe with a diameter of 16mm – finished with a 75mm thick screed.
Developed for new screeded floors, the pocketed polystyrene system grips the underfloor heating pipework in pre-cut channels within the floor insulation and so is protected from site traffic. The system cuts installation time because the layout of the pipework is already set and because it can reduce the depth of screed required and so cut down its drying time.
The Hep2O system is manufactured and Kitemarked to BS EN ISO 21003, and under a Quality Management System which satisfies BS EN ISO 9000 requirements. It is also covered by a 100 year guarantee against defects in material or manufacturing – offering the client total peace of mind.
Comprising panels, piping, manifolds and heating controls, the Hep2O system made the installation simple, fast and straightforward. As well as making little difference to the floor depth, they are also lightweight, easy to cut and handle, can withstand point loadings and can be installed by just one person if necessary.
With this affordable family housing development now complete, the residents are set to benefit from an energy efficient, high performance and cost-effective underfloor heating system for many years to come.
Wavin’s Hep2O plumbing systems key to new housing developments in Scotland
From entry level starter homes to new luxury executive homes, the market leading Hep2O range of plastic piping has been specified across a range of new build properties in Scotland.
Built by DGS Properties Ltd, more than 600 homes across Scotland from Dumfries to Dundee now feature a comprehensive range of Hep2O plumbing systems. Targeted at a wide house buying market, each new build home features the latest technologies and is built to the highest standard of quality through the specification of products such as Hep2O.
“Hep2O is the most reliable and best quality plumbing system, and one that we consistently specify across all the homes we build,” commented Stewart Cree, Director DGS Properties Ltd. “We have had zero problems with Hep2O, a fit and forget product that is easy to install, offers design flexibility and includes great technical back-up.”
With modern advances in technology, push-fit plumbing such as Hep2O is leading the way as it offers the installer reduced installation times, flexibility and leak proof durability. Easy to use and ultra-reliable, the whole Hep2O push fit range of plumbing has been designed with, and for professional plumbers, and offers a wealth of benefits and ground breaking features to the installer.
Built to last with an industry leading 50 year guarantee, Hep2O offers reliability and ease of installation due to the secure HepKey™ demounting system and the revolutionary joint recognition feature, In4Sure™, a push fit system which tells you when the pipe is fully inserted.
Fully compatible with copper, the Hep2O range encompasses flexible plastic plumbing for hot and cold applications and underfloor heating systems for domestic and light commercial use. Kitemarked to Class S of BS 7291, parts 1 and 2 and manufactured within a Quality Management System which satisfies BS EN ISO 9002, Wavin offers a 50 year guarantee on all Hep2O pipe and fittings.
With more and more developers, contractors and plumbers turning to Hep2O, homes across the UK will have a plumbing system that offers flexibility, leak proof durability and one that they can rely on for the long term.