POLYPIPE TERRAIN LTD
Suppliers of: Drainage System, Soil & Waste, Rainwater Goods, Vent Systems, Fire Trap, Underground Drainage
POLYPIPE TERRAIN have been pioneering the development of plastic drainage systems for over 50 years. We are the drainage experts and set the benchmark for quality, installation, flexibility and offer unrivalled product innovation. Our extensive range of engineered above groun drainage pipe products have been designed for commercial buildings and our Terrain Fabrication Service provides bespoke engineered drainage solutions as complete systems - ready to install.
Polypipe has an established market position spanning the residential, commercial, civils and infrastructure and public non-housing sectors and Polypipe is uniquely positioned to offer solutions that help deal with the pressures placed on urban environments and natural resources.
Terrain FUZE is installed via fusion-welded joints for maximum joint integrity and is suitable for chemical drainge due to being corrosion resistant. Terrain FUZE is a high performance and modern drainage system used on a wide range of commercial buildings. Manufactured from high density polyethylene so has strong abrasion, chemical and temperature resistance.
Terrain below ground drainage systems for Commercial and Public Buildings using the lastest plastics manufacturing technology. Our below ground drainage range offers both rigid and foam core pipes and a comprehensive range of fittings to suit all applications.
Roof and Balcony Outlets
Terrain have an extensive range of rainwater outlets for flat roof and balcony applications for commercial, industrial and public sector developments with a comprehensive range covers outlets from 50mm to 110mm.
Terrain Firetrap is a comprehensive range of unique passive fire protection products for use with Terrain Soil and Waste systems, Terrain FUZE and Terrain Acoustic dB12 pipe systems. Each product provides up to 4 hours fire compartmentalisation for drainage soil stacks so that building regulations are met and exceeded. Ideal for use in concrete, masonry, cross laminated timber construction or plasterboard partitions as well as concrete floor constructions.
P.A.P.A and Pleura Vent System
The Terrain P.A.P.A (Positive Air Pressure Attenuator) and Pleura Vent System eliminates the need for a traditional piped secondary vent system, meaning there is no need for vent penetrations in the slab drastically reducing the requirement for vent penetrations through the roof.
Gravity Rainwater Gutters and Downpipes
Terrain Gravity Rainwater offer a range of three gutter profiles in PVCu to help achieve performance and design objectives. Our fully integrated system of gutter and downpipe assemblies include all the fittings and accessories needed for easy installation in both residential and commercial applications.
Acoustic dB12 Drainage System
Terrain Acoustic dB12 drainage system is engineered to meet the demands of the increased call for acoustic systems. This triple layer pipe system is easy to install with specially developed co-polymer polypropylene layers and acoustically engineered fittings that effectively dampen both airborne noise and sound transmitted through the building structure. It is suited to large, multi occupancy buildings such as apartment developments, student accommodation and hotels. It can also be used both in new developments and refurbishment projects and is highly resistant to impact, even at low temperatures, and has demonstrated excellent resistance to corrosion across a wide range of chemical agents and temperatures.
Soil and Waste Products
Terrain soil and waste products are for use in Commercial and Public Buildings. We have developed the solvent-weld systems over 50 years ago and are recognised worldwide for our premium soil and waste product range. We have an extensive range of ABS waste drainage products for commercial buildings, industrial, housing and public sector developments and we offer manufactured, engineered and accredited systems.
Further technical information, image galleries and product specifications are available through the Polypipe Terrain website or via the BPi Download Library.
These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. Please check with the supplier before specifying or purchasing products.
1. Polypipe Terrain Soil and Waste Technical Manual
Terrain soil and waste technical manual
Published [18/05/18]File size [15397 KB]
2. Polypipe Terrain Drainage Price List 2018
Published [18/05/18]File size [5992 KB]
Polypipe Terrain Fabrication Brochure
Published [16/06/17]File size [6907 KB]
Polypipe Terrain Pleura
Published [27/06/17]File size [5118 KB]
Polypipe Terrain Reach New Heights Brochure
Terrain PVC Drainage Systems
Published [31/07/17]File size [1450 KB]
Polypipe Terrain Siphonic Hydromax Product Guide
Siphonic Rainwater Drainage
Published [27/06/17]File size [2469 KB]
Polypipe Terrain Tall Buildings Brochure
Terrain PVC Drainage Systems
Published [27/06/17]File size [6154 KB]
Polypipe Terrain Underground Brochure
Published [16/06/17]File size [3996 KB]
Keepmoat Regeneration goes large as Polypipe’s Ridgistorm-XL delivers benefits
Keepmoat Regeneration goes large as Polypipe’s Ridgistorm-XL delivers benefits for multimillion pound Hull project
Polypipe has provided a complete water conveyance and attenuation solution for a new Keepmoat Regeneration residential development in Hull. Polypipe delivered a system that demonstrates how large diameter pipes can meet strict Sewers for Adoption guidelines, while managing the traffic load from the road system.
The Portobello Street development is located approximately three miles away from Hull city centre and will provide 142 new homes for Homegroup and Hull City Council as part of the regeneration of this area of the city.
Polypipe was approached to assist with the design and manufacture of a solution that met the requirements of Yorkshire Water and Hull City Council. Polypipe advised the use of large diameter plastic piping and modular manholes, and worked closely with Hull City Council and Yorkshire Water to present the benefits that their Ridgistorm-XL large diameter plastic pipe system could deliver over a traditional concrete system.
Working with the project Consulting Engineer, Polypipe assisted the design and manufacture of a solution that fulfilled all Sewers for Adoption criteria, as well as achieving the conveyance and attenuation needs of the site. The engineered system design gained full section 104 approval for the adoption of surface water run-off into their watercourse, and section 38 approval for the installation of the system on the development site.
The final design used over 231m of Polypipe’s 1,200mm Ridgistorm-XL large diameter plastic pipework. The adaptability of the thermoplastic system meant that the Polypipe pre-fabrication team could manufacture the pipework in a stiffness class tailored to the specific ground conditions at the location, without sacrificing overall strength and resilience.
The Ridgistorm-XL pipes were used to form four tanks to attenuate and convey surface water run-off from the development. Each tank was linked to a flow control chamber featuring a flow control unit and penstock, to manage the subsequent release of surface water run-off into the approved watercourse. A pre-installed weirwall in each of the chambers also provided a stable end connection to Yorkshire Water’s existing drainage system.
Furthermore, Polypipe was able to manufacture and supply pipes and chambers with spigot and socket jointing, once again reducing installation time, and also enabling easy separation in future, if required. With the thermoplastic structured wall system being up to 94% lighter in weight than concrete, it is easier to handle and quicker to install, which ensured efficient installation on the Portobello Street site.
The design also included 12 pre-fabricated Ridgistorm-XL Manholes, 10 of which were supplied in a diameter of 2,100mm, together with one 2,400mm and one 1,800mm in diameter. Polypipe’s pre-fabricated manholes are modular, ready-to-install access points that can be integrated at any part of a network system. The manholes were installed at strategic points throughout the pipe network, and were benched and channelled in accordance with Sewers for Adoption guidelines, once again demonstrating the adaptability of a large diameter plastic system to meet exacting project requirements.
These manholes, which can be installed efficiently straight from delivery, will ensure ease of access for future inspection and maintenance.
Trevor Smallman, Project Manager at Keepmoat Regeneration, said, “Polypipe provided a value engineered solution using Ridgistorm-XL tanks, with pipes manufactured to the perfect stiffness classification to meet our needs, together with convenient pre-fabricated pipework and manholes.
“The resulting solution met the requirements of Yorkshire Water and Hull County Council, while also providing a robust and efficient system ideally suited to the development’s challenging conditions.
“In addition, as the system is much lighter than concrete, it provides numerous benefits from a health and safety point of view during the installation.”
David Marsden, Residential Development Specialist, North at Polypipe, said, “We were delighted to provide a tailored solution for this multimillion pound residential development. We design and manufacture a range of trusted and approved water management systems that are robust and reliable, safer and quicker to install for ground workers, and adaptable enough to meet the specific requirements of each individual project. We were pleased to be able to work closely with Yorkshire Water and Hull County Council to achieve approval for installation under the local highway and demonstrate the multiple benefits that a plastic solution can offer over a traditional concrete system.”
Terrain FUZE installed throughout major central London residential project
Working alongside main contractor Balfour Beatty Construction and M&E contractor Briggs and Forrester MEP Ltd, Polypipe designed and delivered fabricated drainage stacks utilising its popular Terrain FUZE for the Providence Tower and Bar Building apartment buildings, which stand at 42 and 12 storeys respectively. Terrain FUZE incorporates a number of engineered fittings to aid installation and is ideally suited to off-site fabrication where repetition is prevalent, such as in high rise buildings. Unique to this development, which encompasses high-end luxury apartments and affordable housing, was the use of 160mm diameter low entry manifold, a wide pipe suitable for the project.
The light weight nature of Terrain FUZE brought many advantages over traditional materials, not least in its manoeuvrability on site, while the use of fabrication meant that the system could be installed quickly and efficiently, providing significant time and resource savings. Paul Campbell, Project Director of Briggs and Forrester MEP Ltd, said:
“Whilst there were many benefits to using Terrain FUZE over alternative solutions, it was Polypipe Terrain’s ability to custom engineer low entry manifold hat really impressed us. Being engineered specific to the project, in Polypipe’s on site fabrication facilities, meant the turnaround time was minimal, ensuring a smooth installation.”
Damian Farrell, London & South East Sales Director, of Polypipe Terrain, said:
“Our experience on delivering on projects of this nature, combined with our extensive system knowledge, means that we can create engineered solutions that meet the needs of the development, such as the 160mm diameter low entry manifold that was unique to this project.”
The shell and core of the buildings are now complete and the fit out is due to complete in 2016.