Part One: Understanding The Strategic Role Of Commercial Solar Thermal
For UK commercial buildings seeking to reduce energy consumption, carbon emissions and exposure to energy costs, domestic hot water (DHW) deserves greater attention. Electrification is increasingly central to building decarbonisation, but replacing gas with electricity does not in itself eliminate energy demand. The strategic challenge is therefore to reduce the amount of purchased energy a building needs while integrating renewable generation intelligently.
Solar thermal provides a proven means of doing exactly that. Unlike solar photovoltaic (PV) panels, which convert sunlight into electricity, solar thermal collectors turn available solar energy directly into useful heat. That heat can preheat cold mains water before it reaches the building’s principal water heater, reducing the energy required from gas, direct electric or heat-pump systems. Buildings with substantial, consistent and predictable hot-water demand therefore offer particularly strong applications for solar thermal.
Effective specification, however, requires more than simply identifying an available roof and adding collectors. Demand patterns, orientation, shading, storage, system temperatures, available plant space, existing infrastructure and the choice of primary water-heating technology all influence the final design. Solar thermal should consequently be considered as part of a whole-system energy strategy rather than as a standalone renewable addition.
Start With the Hot-Water Demand
The starting point for any commercial solar thermal project should be the building’s actual requirement for hot water. This matters because the strongest opportunities are found where demand occurs regularly enough to make productive use of the solar energy collected.
Hotels, leisure facilities, healthcare environments, educational buildings and other commercial facilities with substantial DHW requirements are well suited to the technology. Offices and smaller premises can also benefit where they have a sufficiently predictable load. Adveco recommends assessing actual hot-water profiles and site conditions before committing to a system, because intermittent or highly variable demand will inevitably affect utilisation.
For an existing building, that means understanding current consumption rather than relying solely on theoretical assumptions. For a new development, the expected daily demand, peak periods and recovery requirements should form part of the specification. The objective is not simply to maximise collector area. Oversizing can generate heat when it is not required, increase capital expenditure and weaken returns. Undersizing, by contrast, can leave viable renewable energy savings unrealised.
A well-designed system will therefore use solar thermal to shoulder a meaningful proportion of the heating requirement while retaining a reliable primary or afterheat source. Adveco states that well-designed UK commercial systems can typically offset at least 30% of annual water-heating energy demand, although actual contribution depends on demand, location and system design. During favourable summer periods, solar thermal can potentially deliver a considerably greater proportion of the required water-heating energy.
Assess the Building as Well as the Load
Once demand is understood, attention should turn to the property. Roof area is obviously important, but available area is not the same as usable area. Orientation, inclination, shading, roof access and other rooftop equipment can influence what is practically achievable.
A south-facing, unobstructed installation at an inclination of around 30° provides favourable conditions, although it is not essential. Modern flat-plate collectors can work across different building forms and can be mounted on pitched or flat roofs, integrated into roofs or, where appropriate, installed on walls and façades. This gives designers useful flexibility when retrofit constraints rule out an idealised installation.
Shading is more problematic because it directly compromises available solar gain. Commercial roofs can also be crowded environments, with ventilation equipment, chillers, heat pumps and other building services competing for space. The solution is not automatically to give one technology priority, but to assess which technology produces the greatest, useful contribution for the load being addressed.
Selecting the Right Collector Technology
For commercial DHW applications, flat-plate solar thermal collectors offer a robust approach to capturing solar energy. Adveco’s collectors use a copper meander absorber through which solar fluid circulates, with captured heat subsequently transferred into the water-heating system through a heat exchanger. The modular collector design supports multiple mounting configurations, allowing systems to be adapted to different roof and façade conditions.
There are other practical advantages. Solar thermal operates without the refrigerants associated with heat-pump technology and therefore does not introduce high-GWP refrigerants or F-gas registration requirements, although installers should be appropriately solar-trained. The collectors also operate without noise, which may be valuable for urban commercial sites or locations where plant noise is a planning or operational consideration.
Crucially, commercial solar thermal needs to be considered as a system, not simply as the panels on the roof. Collector quality is important, but so are the hydraulic design, cylinder arrangement, controls, solar fluid management and protection against overheating.
Why Drain Back Matters
One of the most important considerations in long-term solar thermal performance is the management of solar fluid during periods when heat is available, but the building cannot use it.
When a system stops circulating because storage has reached temperature or hot-water demand is temporarily low, fluid left inside a hot collector can overheat. Adveco describes how prolonged stagnation can degrade glycol, eventually producing a tar-like material capable of blocking collectors and damaging pumps and other components. Commercial installations with multiple collectors make protection from these conditions particularly important.
Drain-back provides a relatively simple answer. When useful solar energy is unavailable, or the cylinder no longer requires heat, the pump stops, and solar fluid drains away from the collector under gravity into the designated reservoir. The empty collector can then become hot without damaging the fluid. The process also operates automatically if power is lost and does not rely on an additional powered component to initiate the drain-down.
This has important lifecycle implications. Adveco’s current drain-back product information states that fluid refresh is required at most every eight years under normal operation. Avoiding large heat-dump arrangements also reduces the need to dispose of useful solar heat simply to protect the installation.
The principle is demonstrated in practice by the Bird & Bird London office installation. Solar thermal was originally incorporated to provide DHW preheat rather than replace functioning calorifiers. When storm damage later required a collector replacement, the system’s solar fluid had operated for more than eight years. The collector was replaced, drain-back units checked, fluid renewed, and the systems recommissioned, illustrating how a correctly supported installation can be repaired and returned to service rather than discarded.
In part 2, we will explore how solar thermal supports commercial hot water decarbonisation through retrofit, electrification and hybrid system design
More Resources
https://adveco.co/products/solar-thermal/
https://adveco.co/products/solar-thermal-collectors/
https://adveco.co/products/solar-thermal-drain-back/