Adveco VB Glass-Lined Hot Water Cylinders for Commercial Projects

July 2026

Commercial hot water specialist Adveco introduces the VB range of low-cost carbon steel storage tanks, offering a selection of off-the-shelf vessels for commercial vented and unvented hot water (DHW) projects requiring direct electric heating, buffer storage, indirect heating or preheat.

A wide range of low-cost commercial carbon steel storage tanks and calorifiers

Direct electric, buffer storage, indirect heating & preheat for hot water applications

From 200 litres up to 3000 litres capacity

“Tough enough to deal with water conditions typically encountered across the UK, the new VB family of hot water cylinders presents a versatile selection of vessels with single and double coil variants, as well as no coil and the option for electric immersion to rapidly and cost-effectively replace vessels in ageing commercial hot water systems,” said Greg Brushett, Adveco Director of Sales.

Adveco VBI
Designed to serve as an indirect water heater or preheat vessel, the Adveco VBI is available in a range of sizes from 200 to 3000L to support most all-electric systems. Compatible with direct electric immersion heater options from Adveco, the VBI supports duty immersions from 3 to 36 kW, as well as secondary supplementary immersions from 3 to 6 kW for additional heating or as backup to ensure continuity of service from a single unit.

Adveco VBT
Twin coil VB glass-lined hot water cylinder for low carbon & heat pump systems VBT carbon steel calorifiers are designed to serve as indirect water heaters for vented and unvented DHW applications. The tanks, also available in 200 to 3000 litres capacities, incorporate two fixed indirect heating coils, one each at low and high level, designed for use with two separate heat sources.

Adveco VBB
VBB glass-lined storage buffer cylinders for commercial hot water. Carbon steel storage tanks with a single fixed indirect heating coil at low level are designed to serve as buffer storage, especially in low-carbon applications enabling heat pumps, as well as indirect water heaters or preheat vessels. Available in 200 to 2000 litres capacities, VBB can also accept a 3-36kW electric immersion.

To prevent corrosion, the tanks are constructed from a carbon steel shell with a high-quality, corrosion-resistant inorganic blue enamel lining. They are suitable for use in systems with maximum working pressure up to 8 bar and temperatures up to 85°C and include a magnesium sacrificial anode as standard.

The vessels are protected by rigid high-density polyurethane foam insulation (200-500 litres) or a tough, removable polyester fibre insulation (750-3000 litres). Maintenance is simplified with front-facing clean-out, with plate and flange bedded into each other, offering an improved fit with reduced chance of a leak developing over time.

Supporting ancillaries from Adveco for VB Cylinder include:

Electric Immersion Heaters from 3-36 kW (VBI / VBT & VBB 200-500L)
E0008/0-95C: Control Thermostat with 0-95°C range
E0011: Overheat thermostat
MB0001: Destratification pump kit
Unvented Kits

Visit https://adveco.co/products/water-heating/vb-commercial-hot-water-cylinder/

Resources for ADVECO LTD