Building work goes on whatever the weather, so we thought it would be a good time to provide some tips on installing our systems in colder conditions. Cooler weather temperatures can affect installation materials and curing times, so to help you plan ahead, we have put together some practical guidance.
Working with adhesives in lower temperatures
The adhesive used to fix brick slips to backer panels can behave differently when temperatures drop. When the adhesive is cold, it becomes thicker and harder to apply.
To make your adhesive easier to work with:
Store adhesive tubes in a warm, dry area on site whenever possible
Warm the tubes gently before use, for example, in a site office or in warm water
Avoid leaving materials outside overnight.
Please note:
Adhesive curing requires temperatures of at least 5˚C
In cold weather, curing will slow down, allow additional adhesive curing time before commencing pointing.
By planning ahead, you can prevent delays and achieve a better finish.
Using Europoint mortar in cold weather
Europoint is a sand and cement-based mortar, and its performance is also affected by temperature. Low temperatures extend curing times and can impact the final result.
When applying Europoint mortar in cold conditions:
Only apply in temperatures of 4˚C and rising
Do not apply mortar much after late morning, to allow extra time for setting and tooling off
Schedule carefully during the shorter daylight hours of winter
It is important not to begin pointing work that cannot be completed and tooled on the same day.
Protecting finished work
Once applied, mortar must be kept safe from frost and moisture. Sudden freezing can weaken the bond and affect the appearance of the finished work.
To protect your installation:
Cover newly finished areas with hessian or similar breathable material
Shield work from overnight frost whenever possible
Keep rain off the surface until fully cured.
These simple steps help ensure a durable and consistent finish.
Further help & technical support
If you have any questions about installing Eurobrick systems in cold weather conditions, our technical team is always happy to help.
Visit the Downloads section of our website to access:
Installation Guides
Europoint mortar instructions
You can also watch our Mortar Application video on our YouTube channel, which is especially useful for new installers or those seeking a quick refresher.
By planning ahead and managing temperature-sensitive materials carefully, successful installations can continue all year round. If you require personalised advice, please get in touch with our team – we are here to support you throughout your project.