Hydron Protective Coatings - Specialist Heavy Duty Cleaning Products
The Hydron range of specialist cleaning products are developed for a wide variety of applications. From sterilising solutions to heavy duty mortar cleaner, you can be confident that Hydron's products are high quality and will help to provide the required result.
MC1 Multi Clean
A water soluble degreaser formulated to remove staining and general grime from pre-fabricated buildings and other hard surfaces. Will effectively remove staining from Plastisol and other prefinished building structures. MC1 will also remove general grime from painted surfaces.
SP1 Security Paint
A non-oxidising, non-setting coating based on selected coloured pigments in a petroleum derived base. SP1 Security Paint is constantly greasy and mobile providing a deterrent to intruders, burglars, vandals etc. and is also a safeguard against unauthorised entry into dangerous areas such as chemical stores, electrical installation etc.
SS1 Sterilising Solution
SS1 Sterilising Solution is a specially prepared, ready to use wash for use before painting to protect against mould or fungi. Kills spores of mould and algae and its effective use will enable decoration of the treated surface with minimal risk of re-infection from the old surface.
SS2 Sterilising Solution
SS2 Sterilising Solution is a specially prepared, ready to use wash to kill and prevent the growth of mould and algae. Kills spores of mould and algae and will prevent the growth of new spores for up to 3 years.
SN1 Salt Neutraliser
SN1 Salt Neutraliser is an aqueous solution based on acetic acid combined with a surfactant that has been specifically developed to overcome the problem of salts in mineral building surfaces such as new plaster, brickwork, concrete and old stone. Neutralises the action of salts to prevent or reduce efflorescence. Applicable to all mineral building surfaces.
Nu-Bloc Stain Blocker
Nu-Bloc Stain Blocker is a stain blocker for interior surfaces. Nu-Bloc Stain Blocker will prevent stains from bleeding through from the substrate. One coat coverage and can be used over grease, nicotine, water stains, rust, graffiti and ink. Is suitable for all types of interior surfaces. It is ideal for application over new or old plaster walls, drywall, new or previously painted wood. Nu-Bloc is unmatched in ability to seal off the widest variety of hard to kill stains including knots and sappy streaks, in new wood, graffiti stains and stains from grease, smoke, soot and fire damage.
WD1 Wash Down Solution
A water soluble degreaser formulated to remove paint removers and general grime from wall and ceiling surfaces prior to painting. Will effectively neutralise paint removers and remove pigment staining from porous substrates. Will also remove general grime from painted surfaces.
PC1 Pave Clean
A specially formulated blend of solvents and detergents developed to clean outdoor paving and hard landscape surfaces. Will effectively remove all types of soiling, pollution, greasy stains chewing gum and even the greasy stains left after the removal of chewing gum. For all types of paving and hard landscaping.
DC1 Deck Clean
A water soluble degreaser formulated to remove staining and general grime from concrete floors and other hard surfaces. Will effectively remove staining from concrete floors. DC1 can be used for floors, walls and a wide variety of hard surfaces. Will also remove general grime from painted surfaces.