PRECOLOR SALES LTD
NEWPORT ROAD
MARKET DRAYTON
SHROPSHIRE TF9 2AA
Tel: 01630 657281
Fax: 01630 655545
Suppliers of: GRP Tanks cold water storage tank fibreglass water storage tanks
PRECOLOR SALES are specialists in manufacturing GRP water storage tanks and liquid chemical storage tanks.
GRP Chemical & Water Storage Tanks
Precolor water and chemical storage tanks can be supplied as one piece tanks, two piece tanks (semi sectional) or full sectional storage tanks. Bespoke sized storage tanks can also be manufactured to special requirements.
Our tanks are suitable for a variety of uses from simple feeder tank and expansion tanks to fire sprinkler water storage tanks. Our website shows a full list of our sizes. Our standard rigid one piece water storage tanks can be supplied in Metric and Imperial sizes from 10 - 11,250 Gallons or 45 - 90,000 Litres. Precolor water tanks can also be pre insulated to in either 25mm, 50mm, 75mm or 100mm expanded CFC free polyurethane foam. The insulation is encapsulated in both the lid and tank.
Exell Large One Piece Tanks
The Excell is a WRAS Aprroved one piece water storage tanks. Excell can be supplied to have a capacity of up to 21475 gallons (97,500 litres) and includes the advantages of having:
- Low installation costs
- No joints or sealant
- No bolts or steelwork in contact with the water.
- Low future maintenance costs
- The ’EXELL’ range of water tanks are generally more cost effective
GRP Housings & Accessories
We also manufacture GRP housings, special molds, drip trays and a range of other accessories as required.
GRP Covers
Precolor offer a range of self supporting and centrally supported GRP covers. These can be circular, square or rectangular. As well as being lightweight and weatherproof they can also be made resistant to most chemicals. GRP covers are suitable for covering tanks containing wholesome water, waste water and various chemicals. Access hatches, inspection hatches, ladders, hand rails and walkways can be incorporated.
Plant Tanks
A fully WRAS Approved tank on one side complete with air gaps when necessary and a plant housing on the other complete with plywood backing board, lockable door handles, louvred vents and stays for the double or singe doors that are available. Plant tank are suitble for internal or external applications as up to 100mm of CFC & HCFC free insulation foam can be added for further protection.
Water Tank Fittings & Valves
We can supply most storage tank fittings including screened Overflows, warning pipes, tank breathers and vents, stub flanges, equilibrium ball Valves and Aylesbury float valves amongst others. Type AB air gaps are available for fluid category 5 back flow prevention on water tanks via a raised ball valve housing that is supplied with screened spillover weirs.
WRAS Approved
We have over 40 years trading experience making our tanks some of the highest quality on the market. All of our GRP water storage tanks are built to last and are fully WRAS approved.
Fire Sprinkler Tanks
Precolor fire sprinkler tanks are large capacity water storage tanks that may be required to be built in a particular shape or size. Precolor have the capability to manufacture these tanks at competitive costs and with short lead times. As standard, tanks can be made in one piece, semi sectional or full sectional.
Quality Assured
The maintenance of quality is of major importance to us and all our systems are fully compliant with BS EN ISO 9001 : 2008 and we deliver throughout the UK. Please contact our Sales team on 01630 657281 for further information. We would be keen to quote for any storage tank enquiry you may have.
Precolor - Handy Maintenance Tips for Water Storage Tanks
A quality water tank is a big investment. This is why you must keep it safe and ensure that clean water runs through your pipes and to your bathroom and kitchen taps to make it last and get your money's worth.
Water storage tanks are designed to withstand extreme conditions and temperatures. Some last for a very long time, but some don't. The reason for this is regular and proper maintenance.
Here are the top factors you need to know to maintain your water storage tank in good condition:
Check tank foundation weekly.
The construction of many water tanks, such as the GRP water tanks, is durable. So, they can last for many years with proper maintenance. If you don't check your tank, it can be exposed to possible hazards such as cracks, corrosion, and deterioration.
Before they become worse, you should be able to detect these risks. Checking them every week will allow you to take action at these risks at their early stages.
Make sure the water isn't contaminated.
You have to keep in mind that water is one of the most crucial components of water storage tanks. So, if you observe anything wrong with the water on the tank, it's best to determine if it's indeed contaminated water before throwing it away. Depending on how severe the impurities are, you can opt to treat the water.
Clean your tank.
If you use contaminated water accidentally, it can result in waste. For instance, if you didn't notice right away that you're using contaminated liquid to water your plants, it can result in killing your plants.
You can save water and prevent it from being contaminated by regularly cleaning your tank. It's easy to do this when you have the following essential tools:
Floor mop
Bucket
Unscented cleaning solution
PPE or personal protective equipment
You can also use other cleaning tools, such as dry towels, wet or dry vacuums, pressure washers, and sump pumps. These tools can help remove stubborn substances that cause contamination and other water problems.
Take care of the coating.
The coating of water tanks goes beyond aesthetics. Some tank manufacturers have coatings to prevent corrosion, and others provide construction with minimal visually-appealing elements. Proper maintenance of the coating can help you save from maintenance expenses in the long run.
You can keep the coating by putting a topcoat layer on your tank every year. You should also remove the water from your tank since the chemicals from your topcoat could contaminate the water and cause plumbing problems.
Remove the algae from the tank.
Some people opt to use translucent or transparent water storage tanks to add beauty to their properties. But, transparent water tanks are susceptible to algae growth. Algae can contaminate water in the tanks and gradually decrease the durability of the tank's structure.
You can remove algae by choosing an opaque water tank. Algae grow when there's ample sunlight. It develops through photosynthesis, meaning it gets its nourishment from sunlight. So, if you remove the light source, it's highly likely that the algae inside your tank will not thrive.
Conclusion
Hopefully, the tips above have given you ideas on maintaining your water storage tank to make it last. They will help keep your tank in good shape while ensuring the cleanliness of the water. However, these tips might not work no matter your efforts if you have a low-quality water tank.
If you're looking for a trusted water tank brand, consider our water storage tanks from Precolor. Our water tanks are quality and versatile. You also get a 10-year warranty that shows how promising and durable our products are. Browse our website to see all the quality water tanks and accessories we have in store.
Precolour : What is a GRP Enclosure?
What is a GRP Enclosure?
Perhaps you have come across the phrase ‘GRP enclosure’ whilst researching water systems for your workplace or business premises. It is not a commonly used phrase, so you may well be wondering what it means, and why you would use one in your business.
What is a GRP enclosure?
In the simplest terms, you could say that a GRP enclosure is a box that is specifically designed to be long lasting and hard wearing, even if it is outside. That is a very simplistic way of describing it, but it is a good starting point. The enclosure can be located outside, as it does not require any protection from the elements, even in cold weather or bright sunlight. They are sometimes referred to as kiosks, though this might not be the name that you use for them. They can be used for many purposes, but a common use is as a place to store water tanks including the associated connections, piping, thermostats, pumps and other plumbing elements in the system.
What is GRP?
GRP stands for ‘glass reinforced plastic’. It is also known as ‘fibre reinforced plastic’, or FRP – it is simply another name for the same material. Whichever name you use, this is a material that is a combination of a plastic resin and a mesh of long fibres, usually glass. The resin provides the solid, water tight material that is resistant to the weather and sunlight. The fibrous mesh provides reinforcement that makes the plastic rigid and able to maintain its strength for many years. This material is used in many situations that require long lasting construction. For example, the hull of many modern boats is made from this material, enabling them to stay in the water for years and to withstand bumps and knocks that happen under the surface. One of the important features of this versatile material is that it is watertight and resists the cold as well as harsh weathers, making it ideal for outdoor use. It is also resistant to UV light, meaning that it will not become weakened in sunlight.
The enclosures are created using a mould; a layer of resin is placed into the smooth mould, with a hardening agent and any colour that is required. Then a fibre mesh is laid on top, followed by more resin and hardener. This is repeated until the required thickness of the overall material is achieved. The material is then cured to become hardened, before being removed from the mould.
What types of industry would make use of them?
We could use a full blog article to mention the types of industry that make use of these structures. To put it simply, any industry that uses cold water storage tanks or glass reinforced plastic water tanks might use this type of construction. This could include factory complexes, marine sites like docks or harbours, agricultural centres and processing plants, building sites and industrial complexes, or any other business which makes use of tanks and water storage.
Are all GRP enclosures the same?
Although all enclosures have some commonalities, such as the materials used and the overall purpose, there are also many differences in the structures that are created. For example, an obvious difference might be the size or the colour of the finished unit, but also it could be that a customer requires a particular thickness of the reinforced plastic.
Whatever you require in terms of GRP enclosures, GRP water tanks or GRP storage tanks, Precolor Tank Division are the specialists you can rely on. We specialise in high quality manufacturing at competitive prices. For more information, contact our team today.
