SOPREMA UK: Alsan PMMA, Liquid applied Balcony system, with paving slabs on a concrete deck
Alsan PMMA liquid applied system provides a rapid curing and seamless waterproofing solution to a variety of applications. Designed using a cold applied fast drying primer, and a rapid curing and highly flexible PMMA surface liquid waterproofing layer with reinforcement fleece. For high traffic applications, a rapid-curing, flexible, self-levelling PMMA hard wearing layer is added with the UV-stabilized, flexible pigmented PMMA resin seal to finish.Features and benefits:Low temperature application.Fully-bonded.Cold applied.BROOF(t4) rated.20 year system warranty.System Summary: -Primer - dependant on substrate:Alsan 170 - Concrete Primer.Alsan 171 - Combination Primer (for interface details with changing absorbent substrates). Alsan 172 - Bitumen Primer. Alsan 103 - TPO Primer. Alsan 104 - Metal Primer. Alsan 105 - Glass Primer. Alsan 176 - Highly porous substrates. -Waterproofing layer: Alsan 770 or 770TX, applied wet on wet with Alsan Fleece P. -Wearing Layer: Alsan 870 - Three component self levelling mortar.-Finish: Alsan 970 F - Pigmented sealer coat. Alsan 970 FT - Transparent sealer coat. Alsan 971 F - Texturered sealer coat. Alsan 972 F - Highly textured sealer coat.-Accessories: Alsan Quartz Sand.Alsan Coloured Quartz Sand. Alsan Deco Chips. Liquid-applied warm roof covering systems

Published [04/04/2024]

SOPREMA UK: Alsan PMMA, Liquid applied warm roof system, on a concrete deck
Alsan PMMA liquid applied system provides a rapid curing and seamless waterproofing solution to a variety of applications. Designed using a cold applied fast drying primer, and a rapid curing and highly flexible PMMA surface liquid waterproofing layer with reinforcement fleece. For high traffic applications, a rapid-curing, flexible, self-levelling PMMA hard wearing layer is added with the UV-stabilized, flexible pigmented PMMA resin seal to finish.Features and benefits:Low temperature application.Fully-bonded.Cold applied.BROOF(t4) rated.20 year system warranty.System summary:-AVCL (applied to a primed deck):Sopravap EVA 35.Sopravap Alu S16.-Insulation:Sopratherm G.-Carrier and protection board:Sopraboard.-Primer :Alsan 172 - Bitumen primer.-Waterproofing layer:Alsan 770 or 770TX, applied wet on wet with Alsan Fleece P.-Wearing layer:Alsan 870 - Three component self levelling mortar.-Finish:Alsan 970 F - Pigmented sealer coat.Alsan 970 FT - Transparent sealer coat.Alsan 971 F - Texturered sealer coat.Alsan 972 F - Highly textured sealer coat.-Accessories:Alsan Quartz Sand.Alsan Coloured Quartz Sand.Alsan Deco Chips. Liquid-applied warm roof covering systems

Published [04/04/2024]

SOPREMA UK: Alsan PMMA, Liquid applied warm roof system, on a timber deck
Alsan PMMA liquid applied system provides a rapid curing and seamless waterproofing solution to a variety of applications. Designed using a cold applied fast drying primer, and a rapid curing and highly flexible PMMA surface liquid waterproofing layer with reinforcement fleece.Features and benefits:Low temperature application. Fully-bonded. Cold applied. BROOF(t4) rated. 20 year system warranty.System summary: Deck primer: Elastocol 600.AVCL (applied to a primed deck): Sopravap Alu S16.Insulation: Sopratherm G. Carrier and protection board: Sopraboard.Primer: Alsan 172 - Bitumen primer. Waterproofing layer: Alsan 770 or 770TX, applied wet on wet with Alsan Fleece P. Liquid-applied warm roof covering systems

Published [04/04/2024]

SOPREMA UK: Duoflex - Double Pour Hot Melt Inverted Roof System for Blue Roofs (Concrete deck)
Hot melt inverted blue roof system on concrete substrate. This system is designed for a Blue Roof application, using the Duoflex Hot Melt system with a cold applied high bond SBS bituminous primer, heavy duty reinforcement fleece, SBS modified bitumen with a polyester reinforcement, XPS insulation and a lightweight and easy to install waterproof and vapour permeable water dispersion geotextile layer loose laid over the XPS insulation.Features include:Insulation has exceptional compressive strength and outstanding energy efficiency.The insulation is also 100% recyclable.Water Flow Reduction Layer contributes to the thermal performance of the roof by retaining the water so it does not penetrate the insulation to the waterproofing layer.Easy to install.BROOF(t4) rated.40 year system warranty. Liquid-applied inverted roof covering systems

Published [04/04/2024]

SOPREMA UK: Duoflex - Double Pour Hot Melt Inverted Roof System with Paving Slabs (Timber Deck)
Soprema’s hot applied, Duoflex Hot Melt structural waterproofing system is characterised by extremely low lifecycle costs, self-healing properties and unrivalled performance for podium deck waterproofing and on inverted flat roofs. Duoflex structural waterproofing can be installed on zero falls in accordance with BS 6229 2018, and a root-resistant cap sheet can be incorporated into the system for subsequent green roof installations.BBA-certified, this structural waterproofing system is made to last the lifetime of the structure to which it is applied. In addition to the DUOFLEX elastomeric bitumen blocks, Soprema’s structural waterproofing systems range consists of SBS bituminous primers, SBS modified bitumen membranes, XPS Insulation and a water flow reduction layer. An inverted Duoflex system must be ballasted with either paving slabs, stone ballast or a green roof system to prevent wind uplift and flotation.Features and benefits:Optimum adhesion.Guaranteed longevity.Easy to install.Good technical performance.Properties in relation to fire: when used in a protected or inverted roof specification, including an inorganic covering listed in the Annex of Commission Decision 2000/553/EC, the system can be considered to be unrestricted under the national Requirements. Liquid-applied inverted roof covering systems

Published [04/04/2024]

SOPREMA UK: Duoflex - Double Pour Hot Melt inverted roof system with stone ballast (Timber Deck)
Soprema’s hot applied, Duoflex Hot Melt structural waterproofing system is characterised by reduced lifecycle costs and self-healing properties for podium deck waterproofing and on inverted flat roofs.Duoflex structural waterproofing can be installed on zero falls in accordance with BS 6229: 2018, and a root-resistant cap sheet can be incorporated into the system for subsequent green roof installations. BBA-certified, this structural waterproofing system is made from a hot-applied, styrene-butadiene-styrene (SBS) modified bitumen membrane. Duoflex blocks are melted on site and applied to the surface in liquid form.Features and benefits:Optimum adhesion.Guaranteed longevity.Easy to install.Good technical performance. Liquid-applied inverted roof covering systems

Published [04/04/2024]

SOPREMA UK: Flagon Sb - Single ply, fully adhered warm roof system
Single Ply fully adhered warm roof system on concrete, with PIR Insulation, fixed with a waterproofing adhesive and finished with a membrane composed of flexible PVC and a non woven polypropene fleece.Features and benefits:High resistance to weathering, UV rays, humidity, and heat.Flexible.Resistant to puncture.Can serve as an integrated separation layer.To be welded with hot air.Applied in conjunction with accessories from Flag – consult manufacturer for details.BBA certified, CE marked and meets Broof classification (t1 and t4) to EN 13501-5. Polymeric membranes

Published [04/04/2024]

SOPREMA UK: Flagon SFc Copper Art Fully Adhered System (PVC)
Single ply fully adhered warm roof system on concrete substrate. This system is designed using a cold applied bituminous primer with a self adhesive vapour barrier membrane composed of SBS bitumen and a composite aluminium reinforcement, and a PIR glass tissue faced insulation adhered using a single component polyurethane adhesive. The final waterproofing layer is a synthetic waterproofing membrane composed of plasticized PVC and containing copper particles giving it a copper look.Features and benefits:Single component primer.High tear resistance waterproofing layer.Aesthetic finish.BROOF(t4) rated.20 year system warranty.UV resistant.Flame free application.Excellent dimensional stability.Easy to weld.Fully adhered. Single layer sheet warm roof covering systems

Published [04/04/2024]

SOPREMA UK: Flagon SFc Copper Art- Single ply fully adhered warm roof system with Copper look (metal deck)
Single ply adhered warm roof system on metal substrate. This system is designed using a cold applied bituminous primer with a self adhesive membrane activator within it. The vapour barrier membrane is composed of SBS modified bitumen with a composite polyester reinforcement, with an adhered PIR glass faced insulation. The final waterproofing layer is an adhered synthetic waterproofing membrane composed of plasticized PVC and containing copper particles giving it a copper look.Features and benefits:Single component primer.High tear resistance waterproofing layer.Aesthetic finish.BROOF(t4) rated.20 year system warranty.UV resistant.Flame free application.Excellent dimensional stability.Easy to weld.Fully adhered. Single layer sheet warm roof covering systems

Published [04/04/2024]

SOPREMA UK: Flagon SR DE - Single ply mechanically fixed warm roof system
A single ply mechanically fixed warm roof system on a timber deck, with PIR Insulation, and a suitable AVCL, fixed with suitable thermally broken fixings and finished with a membrane composed of flexible PVC and a non woven polypropene fleece.Features and benefits:High resistance to weathering, UV rays, humidity, and heat. Flexible. Resistant to puncture. Can serve as an integrated separation layer. To be welded with hot air. Applied in conjunction with accessories from Flag – consult manufacturer for details. BBA certified, CE marked and meets Broof classification (t1 and t4) to EN 13501-5. Polymeric membranes

Published [04/04/2024]

SOPREMA UK: Flagon SR Silver Art Glossy - Single ply mech. fixed warm roof system with Silver look (WNB2PFMFSI_002)
Plasticized polyvinyl chloride (PVC) roofing membrane with polyester mesh reinforcement, designed for mechanical applications.Manufactured by coextrusion or cast process.Features:Resistant to wind stress.Weatherproof and UV resistant.High mechanical resistance.Resistant to puncturing.RAL colouring available on request for landscape or architectural purposes.Applications:For use on an exposed roof, with a mechanical fastening system. Polymeric membranes

Published [04/04/2024]

SOPREMA UK: Sopralene Flam 180 AF - Bituminous Warm Flat Roof system
A warm roof system with a cap sheet composed of elastomer modified bitumen and a non woven polyester reinforcement. Used as an upper layer within a multi layer waterproofing system. The upper surface is finished with slates and the overlap is protected by a thermofusible film. The lower surface is protected by a thermofusible film.An underlayer with a vapour-pressure and tension dispersion system, composed of elastomer modified bitumen and a composite polyester reinforcement. PIR insulation faced with a polypropylene fleece finished bitumen glass working surface and a mineral glass facing to the under side and a self adhesive AVCL applied to a primed deck.Features and benefits:High performance.Flexible until -20°C.CE marked to BS EN 13707.BBA Certified Extensive Broof(t4) testing. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Flam 180 AF - Bituminous Warm Flat Roof system on a metal deck
A warm roof system with a cap sheet composed of elastomer modified bitumen and a non-woven polyester reinforcement. Used as an upper layer within a multi-layer waterproofing system. The upper surface is finished with slates and the overlap is protected by a thermofusible film. The lower surface is protected by a thermofusible film.A self-adhered underlayer with a vapour-pressure and tension dispersion system, composed of elastomer modified bitumen and a composite polyester reinforcement. PIR insulation faced with a mineral glass facing and a self-adhesive AVCL applied to a primed deck.Features and benefits:High performance.Flexible until -20°C.CE marked to BS EN 13707.BBA Certified Extensive Broof(t4) testing. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Flam 250 AF -Bituminous Warm Flat Roof system
A warm roof system with a cap sheet composed of elastomer modified bitumen and a non woven polyester reinforcement. Used as an upper layer within a multi layer waterproofing system. The upper surface is finished with slates and the overlap is protected by a thermofusible film. The lower surface is protected by a thermofusible film. An underlayer with a vapour-pressure and tension dispersion system, composed of elastomer modified bitumen and a composite polyester reinforcement.PIR insulation faced with a polypropylene fleece finished bitumen glass working surface and a mineral glass facing to the under side and a self adhesive AVCL applied to a primed deck. Features and benefits:High performance.Torch-on or hot-air method including the overlaps.Flexible until -20°C.CE marked to BS EN 13707.BBA Certified Extensive Broof(t4) testing. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Flam 250AF - Bituminous warm roof system on a metal deck
A warm roof system with a cap sheet composed of elastomer modified bitumen and a non-woven polyester reinforcement. Used as an upper layer within a multi-layer waterproofing system. The upper surface is finished with slates and the overlap is protected by a thermofusible film. The lower surface is protected by a thermofusible film. A self-adhered underlayer with a vapor-pressure and tension dispersion system, composed of elastomer modified bitumen and a composite polyester reinforcement.PIR insulation faced with a mineral coated glass face and a self adhesive AVCL applied to a primed deck. Features and benefits:High performance.Torch-on or hot-air method including the overlaps.Flexible until -20°C.CE marked to BS EN 13707. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Flam 250AF - Bituminous warm roof system on a timber deck
A warm roof system with a cap sheet composed of elastomer modified bitumen and a non-woven polyester reinforcement. Used as an upper layer within a multi-layer waterproofing system. The upper surface is finished with slates and the overlap is protected by a thermofusible film. The lower surface is protected by a thermofusible film. A self adhered underlayer with a vapor-pressure and tension dispersion system, composed of elastomer-modified bitumen and a composite polyester reinforcement.PIR insulation faced with a mineral glass facing and a self adhesive AVCL applied to a primed deck. Features and benefits:High performance.Torch-on or hot-air method including the overlaps.Flexible until -20°C.CE marked to BS EN 13707.BBA Certified Extensive Broof(t4) testing. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Flam 250AF - Torch applied bituminous warm roof system on a concrete deck
A warm roof system with a cap sheet composed of elastomer modified bitumen and a non-woven polyester reinforcement. Used as an upper layer within a multi-layer waterproofing system. The upper surface is finished with slates and the overlap is protected by a thermofusible film. The lower surface is protected by a thermofusible film. A self-adhered underlayer with a vapor-pressure and tension dispersion system, composed of elastomer modified bitumen and a composite polyester reinforcement.PIR insulation faced with a bitumen impregnated mineral coated glass face and a torch applied AVCL applied to a primed deck. Features and benefits:High performance.Torch-on or hot-air method including the overlaps.Flexible until -20°C.CE marked to BS EN 13707.BBA Certified.Extensive Broof(t4) testing. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Flam Garden 250 AF - Bituminous extensive green roof system on a concrete deck
A warm roof system with a root resistant cap sheet composed of elastomer modified bitumen and a non woven polyester reinforcement. Used as an upper layer within a multi layer waterproofing system. The upper surface is finished with slates and the overlap is protected by a thermofusible film. The lower surface is protected by a thermofusible film. An underlayer with a vapour-pressure and tension dispersion system, composed of elastomer modified bitumen and a composite polyester reinforcement.PIR insulation faced with a fleece finished bitumen glass working surface and a mineral glass facing to the under side and a self adhesive AVCL applied to a primed deck.Features and benefits:High performance.Root resistant cap sheetTorch-on or hot-air method including the overlaps.Flexible until -20°C.CE marked to BS EN 13707.BBA CertifiedExtensive Broof(t4) testing. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Flam Garden 250 AF - Bituminous extensive green roof system on a metal deck
A warm roof system with a root resistant cap sheet composed of elastomer modified bitumen and a non woven polyester reinforcement. Used as an upper layer within a multi layer waterproofing system. The upper surface is finished with slates and the overlap is protected by a thermofusible film. The lower surface is protected by a thermofusible film. An underlayer with a vapour-pressure and tension dispersion system, composed of elastomer modified bitumen and a composite polyester reinforcement.PIR insulation faced with a polypropylene fleece finished bitumen glass working surface and a mineral glass facing to the under side and a self adhesive AVCL applied to a primed deck.Features and benefits:High performance.Root resistant cap sheetTorch-on or hot-air method including the overlaps.Flexible until -20°C.CE marked to BS EN 13707.BBA CertifiedExtensive Broof(t4) testing. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Flam Garden 250 AF - Bituminous extensive green roof system on a timber deck
A warm roof system with a root resistant cap sheet composed of elastomer modified bitumen and a non woven polyester reinforcement. Used as an upper layer within a multi layer waterproofing system. The upper surface is finished with slates and the overlap is protected by a thermofusible film. The lower surface is protected by a thermofusible film. An underlayer with a vapour-pressure and tension dispersion system, composed of elastomer modified bitumen and a composite polyester reinforcement.PIR insulation faced with a polypropylene fleece finished bitumen glass working surface and a mineral glass facing to the under side and a self adhesive AVCL applied to a primed deck.Features and benefits:High performance.Root resistant cap sheetTorch-on or hot-air method including the overlaps.Flexible until -20°C.CE marked to BS EN 13707.BBA CertifiedExtensive Broof(t4) testing. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Optima - Bituminous Warm Flat Roof System (CNB1PGPSBF_001)
A warm roof system with a cap sheet composed of styrene-butadiene-styrene (SBS) modified bitumen with composite polyester reinforcement. The upper surface is finished with granules and the overlap is protected by a thermofusible film. The lower surface is protected by macro-perforated thermofusible film and talcum/sand for use within a single or multi layer waterproofing system.An underlayer with a vapour-pressure and tension dispersion system, composed of elastomer-modified bitumen and a composite polyester reinforcement. PIR insulation faced with a polypropylene fleece-finished bitumen glass working surface and a mineral glass facing to the under side and a self-adhesive AVCL applied to a primed deck.Features and benefits:BROOF (t4).Good cold bend resistance.Can be installed at very low temperatures.High puncture resistance.Long life expectancy.Laps may be hot air welded.CE marked to BS EN 13707. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Optima - Bituminous warm roof system (Timber Deck)
An underlayer with a vapour-pressure and tension dispersion system, composed of elastomer modified bitumen and a composite polyester reinforcement. PIR insulation faced with a polypropylene fleece finished bitumen glass working surface and a mineral glass facing to the under side and a self adhesive AVCL applied to a primed deck.Membrane composed of styrene-butadiene-styrene (SBS) modified bitumen with composite polyester reinforcement. The upper surface is finished with granules, with the selvedge protected by a polypropylene film. The lower surface is protected by a micro-perforated thermofusible film with a sand/ talcum finish.Features and benefits:Good cold bend resistance. Can be installed at very low temperatures. High puncture resistance. Long life expectancy. Laps may be hot air welded. CE marked to BS EN 13707. BBA Certified Extensive Broof(t4) testing. Reinforced bitumen roofing sheets

Published [04/04/2024]

SOPREMA UK: Sopralene Optima C3 GMF & Sopratherm T warm roof granule system on wood
Soprema's reinforced bitumen warm roof system on a wood substrate. The VCL is self adhesive and a polyisocyanurate insulation layer with mineral coated glass facers is fixed with a polyurethane adhesive. The capsheet is a SBS modified bitumen membrane with composite polyester reinforcement for a multi layer waterproofing system, and finished in granules. Liquid waterproofing is used to finish flashings, upstands etc.      Features and benefits:Capsheet offers superior cold bend resistance. Easy to install.Can be installed at low temperatures.High puncture resistance. BROOF(t4) rated.30 years warranty. Reinforced bitumen roofing sheets

Published [04/04/2024]