ION Glass - Non-slip glass flooring: grip without losing the light
October 2026

Slip-resistant glass floors, bridges and stair treads - what “non-slip” actually means, and what to specify...

Non-slip glass flooring: grip without losing the light
Glass floors, bridges, stair treads and viewing panels let light and sightlines pass through a structure that still needs to be walked on safely. Ion Glass specifies slip-resistant finishes - ceramic frit, etched or textured surfaces, and bonded particle or coating treatments - to add grip while keeping the clarity and light transmission that makes
glass worth specifying in the first place.

One thing worth knowing upfront: “non-slip” isn’t an absolute guarantee. Slip resistance varies with water, dust, grease, footwear, cleaning residue, wear and weather - which is exactly why it needs to be specified and tested properly, not assumed.

Specifying a glass floor, bridge or stair tread? Talk to the Ion Glass Team

How slip resistance is actually measured

The pendulum test (the HSE-recommended method for pedestrian floors) gives a Pendulum Test Value: 0-24 is high slip potential, 25-35 is moderate, and 36+ is low slip potential - the benchmark most projects aim for. Slider 96 is used for shod pedestrians and Slider 55 for barefoot areas. Results from different sliders or conditions aren’t interchangeable, so the test has to match how the floor will actually be used. BS EN 16165 covers the evaluation methods, and slip resistance is assessed separately from structural performance - both need specialist input.

Where it’s specified: internal glass floors and panels, glass bridges and link walkways, structural stair treads, viewing platforms, and museum or visitor-attraction floors - including viewing preserved remains below floor level, as at Chichester Cathedral’s glass floor panel.

What to establish before manufacture:

Whether the floor is normally dry, wet or contaminated, and who’s using it (footwear, barefoot, mobility aids)
The test method, slider and acceptance criterion that match that use
Glass build-up, loads, supports and post-breakage performance
Edge protection, visual contrast and accessibility requirements
How much transparency to trade for grip - dense frit gives more privacy, sparse dots keep a clearer view

Book a call to discuss your glass floor or bridge project

Expertise That Delivers the Exceptional

Whether it’s one glass panel or a full walkway, Ion Glass works with you from specification through to installation to get the balance of safety, compliance and clarity right.

Not sure where to start on a glass floor brief? Our Structural Glass Support & Advice service can review a concept or take it from scratch.

If you simply need some advice and inspiration on a project that has yet to be built, take a quick look at some of our other installations:
We are justly proud of the many complex, stunning projects we have delivered
The expert team at Ion Glass will take your bespoke structural glass design from concept to reality, providing technical advice and drawings to ensure your project meets all criteria before our fully trained and experienced installation teams achieve optimum results on site.

Is now a good time for you to talk to us about your upcoming project?
Contact email : info@ionglass.co.uk
Telephone : 0345 658 9988