NORMET UK LTD
UNIT 5 WHELER ROAD
SEVEN STARS INDUSTRIAL ESTATE
WEST MIDLANDS CV3 4LB
Tel: 0333 240 9966
Fax: 0333 240 7744
Suppliers of: foam underpinning foundations injected grouts waterproofing concrete
Normet are world leaders in global solutions to the construction and building industry supplying specialist chemicals and equipment for waterproofing, leak sealing, ground engineering and foam underpinning, tunnel repair along with pumps and accessories.
Normet brings a range of construction chemical products together with a world leading range of equipment for concrete spraying, explosive charging and underground logistics for the tunneling and mining industry.
Tunnelling & Mining
Normet is a long established partner to global mining and tunnelling companies and contractors, providing a range of specialised underground equipment to the industry since 1962. Our range consists of underground logistics equipment, scalers, working platforms and mobile sprayed concrete machines.
Normet also provides a full package of solutions for modern ground support including construction chemicals for sprayed concrete, chemical and cement based injection systems for rock improvement and coal seam stabilisation, to reinforcement systems for high deformation conditions.
In keeping with advancements in sprayed concrete technologies Normet have developed state-of-the-art high performance water reducing admixture systems, hydration control admixtures, high performance alkali-free set accelerators and hyper plasticisers.
Ground Engineering & Foam Underpinning.
Our ground engineering products utilize innovative chemical resins and grouts offering solutions for underpinning, structural subsidence, concrete slab jacking, void filling and general ground improvement. We produce a full range of specialist resins and grouts including single and dual component polyurethane, acrylic, sodium silicates, colloidal silica and microfine and ultrafine cements.
The use of our high expansive and high compressive strength resin foams is now a worldwide accepted material for foam underpinning foundations and increasing ground bearing in suitable soil types.
Rehabilitation and Maintenance
Normet manufacture a broad range of specialist materials for the civil construction, underground construction and general building sectors. For over 35 years the TAM global brand has been prolonging the operational life of structures through the use of cement based repair mortars, epoxy mortars, epoxy injection resins and a full range of polyurethane and acrylic leak sealing resins.
Our TamPur polyurethane and TamAcryl acrylic resins include ultra-low to medium viscosity single and dual component systems for leak sealing repairs. Our resins are used extensively for water control in new build and existing tunnels, leak sealing of shafts, joints and cracks in basements, dams and reservoirs. Many of our resins are approved for use in potable water installations under WRAS.
To complement our materials, Normet provides a full range of injection equipment including single and twin piston pumps, packers, injection lances and accessories.
Waterproofing & Concrete Additives
Our complete range of waterproofing products include both integral crystallization based concrete additives, along with brush and spray applied cement based waterproofing slurries for waterproofing walls and foundations. Our polymer range includes single component liquid based SBR and acrylic membranes for roofs, basements, wet rooms and decks.
We also supply an extensive range of sheet membrane systems. Our waterproof products have been extensively tested to local and international standard and many offer potable water certification.
These files are provided by the manufacturer. While Building Products Index takes every care to ensure the information is correct and up to date, we cannot be held liable for any out of date or incorrect information in them. Please check with the supplier before specifying or purchasing products.
Normet Construction Chemicals
construction chemicals, foams and polymers, Sprayed Concrete for Tunnel / Cross Passages, Soil Stabilisation for Cross Passages / Start & Receipt Shafts, Sprayable Watertight membranes, Pre-injection, Leak sealing, Tail Sealants, Annulus Grout Additives, Main Bearing Greases.
Published [19/09/17]File size [1355 KB]
Normet Construction Chemicals Brochure
Mining, Tunnelling, Rehabilitation & Maintenance Ground Engineering, Readymix & Precast,Watertight Structures
Published [28/02/17]File size [937 KB]
Normet for tough jobs
construction chemicals, sprayed concrete and concrete transport
Published [19/09/17]File size [7505 KB]
Normet Ground Engineering Brochure
Foundation Strengthening and Underpinning, Slab Jacking, Stabilisation and Void Filling
Published [28/02/17]File size [636 KB]
Normet sprayed concrete
wet shotcrete, sprayed concrete
Published [19/09/17]File size [10710 KB]
Normet Tunnelling Brochure
TBM Solutions, Sprayed Concrete & Ground Support, Grouting & Injection, Waterproofing Systems
Published [28/02/17]File size [585 KB]
NORMET LAUNCHES A NEW GENERATION EQUIPMENT OFFERING @ THE WORLD TUNNELLING CONFERENCE
NORMET LAUNCHES A NEW GENERATION EQUIPMENT OFFERING AT THE WORLD TUNNELLING CONFERENCE (WTC) 2017 EXHIBITION IN BERGEN, NORWAY
This new offering improves the mechanization and automation of the most demanding underground work phases and sets the new standard for sprayed concrete, charging and lifting & installation works in hard rock tunnelling.
The new Spraymec Norrunner 140 DC with its long reach spray boom is designed to meet the highest production capacity requirements of Scandinavian sprayed concrete works with an average spraying capacity up to 26 m3/h. It is also capable of accurately spraying water and frost protection linings in a thin layer segment (< 80 mm). Routine service is made easy as all operational access points are reachable from ground level.
The optional “smart” boom is a new tool to help the spray operator attain better results with less rebound as its coordinated motion control is linked to concrete pump output.
The new Himec and Charmec offerings have rigid frame carriers which provide enhanced driving stability over the articulated carrier used in earlier models.
The carriers also have four wheel and crab drive giving better maneuverability in tunnels.
The engine in the new carrier is placed on the side of the equipment and therefore all engine and exhaust after- treatment system’s service points are easily accessed from the tunnel floor level.
The improved Himec and Charmec models have an optional driving-from-the-basket feature. The operator in the basket can safely and easily move each unit from the work platform.
All Himec lifting equipment models can be quickly modified to Charmec explosive charging equipment by adding an ANFO or emulsion explosive charging unit. The new Himec models are available with several single or twin boom configurations.
The new generation equipment displayed at the World Tunneling Congress are the Spraymec NorRunner 140 DC and the Himec RM T 125 which has been modified to a Charmec charging vehicle by installing an emulsion charging unit.
For further information please contact:
Sales and LTC Manager, Normet Scandinavia AB
Mobile: +47 958 25 070
Changes in Normet Group operational model and key management to accelerate growth
Changes in Normet Group operational model and key management to accelerate growth.
In completing his first calendar year with the company, Robin Lindahl, Normet Group’s President and CEO, is reorganizing to maximize the company’s strategic focus and achieve the growth ambition to double the company revenues by 2020. Normet’s operational model and organization will be changed to fully capture the market potential and to better respond to our customer requirements.
“The coming changes will be done to strengthen capabilities across Normet’s offering as well as build stronger process solution capabilities in the underground mining and tunnelling community. We will also look at synergies and efficiency in our global supply chain to gain further competitiveness.” announced Lindahl. These changes will be fully implemented by the end of 2016 and the new organisation will be operational as of January 1st, 2017. “These changes will have positive impact to overall personnel as we plan to further strengthen key focus areas.”
From 1.1.2017 Normet will have three Business Lines, Equipment, Life Time Care and Ground Control & Construction Technologies as well as Market Operations and Global Supply Chain Operations which all report directly to the President and CEO, Robin Lindahl.
The new Equipment Business Line will be responsible for all our equipment businesses and further development of our offering. It will include the Product Management organisation, R&D, sales support functions, and will spearhead Normet EQ 2020, a strategic initiative designed for the evolution of our offering for market leadership into the next decade. The Equipment BL will be headed by SVP Kari Hämäläinen.
The new Life Time Care Business Line will be responsible for Service business and development of our offering. It will include the Service Product Management organisation, Service Marketing & Agreements, Service Operations and Normet Academy. Customer service and support is a keystone of Normet’s strategy.
The Business Line will be headed by SVP Mikko Immonen who joined Normet from Outotec Oyj where he has been an integral part of creating a strong service business over the last seven yearsThe Ground Control and Construction Technologies Business Line will be headed by SVP Odd-Bjørn Kleven. He oversees the amalgamation of Construction Chemicals and Rock Reinforcement, whose technological offering anchors the solutions approach taken to Normet’s tunnelling and mining customers.
Market Operations will concentrate fully on the customer interface, sales and marketing, solution offering and strengthening of the company’s LTC (Life Time Care) network. This will be headed by Mike Rispin, Senior Vice President of Sales and Marketing. The regional set up will continue with six regions each headed by a Vice President.
• CIS/Mongolia – Jorma Piironen
• EMEA – Janne Lehto
• Asia – Alan Pengelly
• Australia/NZ – Neil Fitzmaurice
• North America – Greg Hallett
• Latin America – Marcelo Anabalon
Supply Chain Operations, headed by SVP Timo Rask, encompassing sourcing and global production network for Equipment and LTC, takes a renewed global approach to ensure the most competitive placement of Normet’s offering at the customer interface.