Suppliers of: dry lining insulation PIR Insulation boards sarking boards

Xtratherm PIR insulation is suitable for traditional block, dry lining,roofs and floors, timber frame or steel framed buildings .

Xtratherm PIR insulation, when built into walls, floors and roofs, can deliver outstanding thermal performance even within traditional building methods. Excellent thickness to performance ratio coupled with enhanced mechanical jointing of wall, floor and roof insulation deliver zero-carbon U-values with the improved detailing required for better performing building fabric.

Cavity Wall Insulation.
Xtratherm Partial Fill cavity wall insulation is the best solution when designers/ regulations demand higher U-value performance in external masonry walls. Xtratherm Thin-R Cavity insulation boards achieve these higher standards whilst maintaining a residual cavity giving most effective protection in highly exposed areas of the country. The outstanding performance of Xtratherm Cavity Plus allows these goals to be achieved without a substantial increase in the overall wall thickness.

Insulated Dry Lining Boards.
Whether you are upgrading an existing property or building new, the addition of an insulated thermal dry lining to the inside of a wall, roof slope or ceiling will dramatically improve the energy efficiency standards in your home. Xtratherm insulated dry linings can be fixed in a number of ways, including mechanically fixing or adhesive systems. These include fixing to timber battens or framing and metal furring systems (XT/TL-MF). Or adhesively fixed using proprietary systems and traditional dot & dab bonding. (XT/TL)

Timber Fame Insulation.
Xtratherm’s Timber Frame Insulation Systems, brings Timber Framed wall insulation performance to new levels, surpassing regulation default values and aiming for those standards indicated for 2016 when Zero Carbon or passive homes will be required under the Building Regulations. The BBA certified PIR insulation offered by Xtratherm achieves U-values of around 0.13 W/m2K in standard timber frame sections.

Xtratherm Roof Insulation.
Using Xtratherm on sloped roof areas can provide the most efficient U-values with minimal intrusion into valuable living space. Whether ‘warm roof’, ‘ventilated’ or ‘hybrid’ construction is specified using Xtratherm XT/PR within the buildup will maximize the roofs U-value performance.

Xtratherm Walk On Loft Insulation.
Xtratherm Loft Walk-R is a laminate of high performance PIR insulation with tough moisture resistant chipboard that builds to allow safe access into insulated roof spaces whilst maintaining very high insulation values, and complying with health and safety guidelines.

Flat Roof Insulation.
The Xtratherm range of high performance insulation boards provides the ideal solution for flat roof projects and is available with a range of facing to suit most weather proofing systems.

Xtratherm FR-ALU foil faced boards are suitable for use below PVC, TPO or EPDM single ply roof membranes and loose laid ballasted roofing.
Xtratherm FR-MG mineral coated glass faced boards are suitable for use below single ply fully adhered roof membranes, mechanically fixed single ply waterproofing systems and partially bonded built-up felt systems
Xtratherm FR-BG is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built-up roofing systems
Xtratherm FR-TP is a composite foil faced insulation panel.

Floor Insulation.
The floor in any building is an area of considerable heat loss if it is not properly insulated. Xtratherm XT/UF or Hyfloor when installed within a floor structure, will significantly improve the U-value of new floors at reduced thickness that will tie in with block coursing.